[PATCH 1/3] clk: meson: add sclk-ws driver

[Jerome Brunet <jbrunet@baylibre.com>]

This is yet another simple but odd driver for the audio block of the g12a
and sm1 SoC families.

For TDMOUT's sclk to be properly inverted, bit 29 of
AUDIO_CLK_TDMOUT_x_CTRL should be the inverse of bit 28.
IOW bit28 == !bit29 at all times

This setting is automatically applied on axg and the manual setting was
added on g12a.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 drivers/clk/meson/clk-phase.c | 56 +++++++++++++++++++++++++++++++++++
 drivers/clk/meson/clk-phase.h |  6 ++++
 2 files changed, 62 insertions(+)

diff --git a/drivers/clk/meson/clk-phase.c b/drivers/clk/meson/clk-phase.c
index fe22e171121a..a6763439f7d2 100644
--- a/drivers/clk/meson/clk-phase.c
+++ b/drivers/clk/meson/clk-phase.c
@@ -125,6 +125,62 @@ const struct clk_ops meson_clk_triphase_ops = {
 };
 EXPORT_SYMBOL_GPL(meson_clk_triphase_ops);
 
+/*
+ * This is a special clock for the audio controller.
+ * This drive a bit clock inverter for which the
+ * opposite value of the inverter bit needs to be manually
+ * set into another bit
+ */
+static inline struct meson_sclk_ws_inv_data *
+meson_sclk_ws_inv_data(struct clk_regmap *clk)
+{
+	return (struct meson_sclk_ws_inv_data *)clk->data;
+}
+
+static int meson_sclk_ws_inv_sync(struct clk_hw *hw)
+{
+	struct clk_regmap *clk = to_clk_regmap(hw);
+	struct meson_sclk_ws_inv_data *tph = meson_sclk_ws_inv_data(clk);
+	unsigned int val;
+
+	/* Get phase and sync the inverted value to ws */
+	val = meson_parm_read(clk->map, &tph->ph);
+	meson_parm_write(clk->map, &tph->ws, val ? 0 : 1);
+
+	return 0;
+}
+
+static int meson_sclk_ws_inv_get_phase(struct clk_hw *hw)
+{
+	struct clk_regmap *clk = to_clk_regmap(hw);
+	struct meson_sclk_ws_inv_data *tph = meson_sclk_ws_inv_data(clk);
+	unsigned int val;
+
+	val = meson_parm_read(clk->map, &tph->ph);
+
+	return meson_clk_degrees_from_val(val, tph->ph.width);
+}
+
+static int meson_sclk_ws_inv_set_phase(struct clk_hw *hw, int degrees)
+{
+	struct clk_regmap *clk = to_clk_regmap(hw);
+	struct meson_sclk_ws_inv_data *tph = meson_sclk_ws_inv_data(clk);
+	unsigned int val;
+
+	val = meson_clk_degrees_to_val(degrees, tph->ph.width);
+	meson_parm_write(clk->map, &tph->ph, val);
+	meson_parm_write(clk->map, &tph->ws, val ? 0 : 1);
+	return 0;
+}
+
+const struct clk_ops meson_sclk_ws_inv_ops = {
+	.init		= meson_sclk_ws_inv_sync,
+	.get_phase	= meson_sclk_ws_inv_get_phase,
+	.set_phase	= meson_sclk_ws_inv_set_phase,
+};
+EXPORT_SYMBOL_GPL(meson_sclk_ws_inv_ops);
+
+
 MODULE_DESCRIPTION("Amlogic phase driver");
 MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/clk/meson/clk-phase.h b/drivers/clk/meson/clk-phase.h
index 5579f9ced142..b637b9b227bc 100644
--- a/drivers/clk/meson/clk-phase.h
+++ b/drivers/clk/meson/clk-phase.h
@@ -20,7 +20,13 @@ struct meson_clk_triphase_data {
 	struct parm ph2;
 };
 
+struct meson_sclk_ws_inv_data {
+	struct parm ph;
+	struct parm ws;
+};
+
 extern const struct clk_ops meson_clk_phase_ops;
 extern const struct clk_ops meson_clk_triphase_ops;
+extern const struct clk_ops meson_sclk_ws_inv_ops;
 
 #endif /* __MESON_CLK_PHASE_H */
-- 
2.25.4


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic