From: Lars-Peter Clausen <lars@metafoo.de>
To: Mark Brown <broonie@kernel.org>
Cc: linux-amlogic@lists.infradead.org, alsa-devel@alsa-project.org,
Lars-Peter Clausen <lars@metafoo.de>,
Takashi Iwai <tiwai@suse.com>,
Jerome Brunet <jbrunet@baylibre.com>
Subject: [PATCH] ASoC: meson: Use managed DMA buffer allocation
Date: Fri, 18 Dec 2020 16:45:44 +0100 [thread overview]
Message-ID: <20201218154544.25513-1-lars@metafoo.de> (raw)
Using a managed buffer will pre-allocate the buffer using
snd_pcm_lib_preallocate_pages() and automatically free it when the PCM is
destroyed.
In addition it will call snd_pcm_lib_malloc_pages() before the driver's
hw_params() callback and snd_pcm_lib_free_pages() after the driver's
hw_free() callback.
This slightly reduces the boilerplate code of the driver.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
sound/soc/meson/aiu-fifo-i2s.c | 1 -
sound/soc/meson/aiu-fifo-spdif.c | 1 -
sound/soc/meson/aiu-fifo.c | 18 ++----------------
3 files changed, 2 insertions(+), 18 deletions(-)
diff --git a/sound/soc/meson/aiu-fifo-i2s.c b/sound/soc/meson/aiu-fifo-i2s.c
index d91b0d874342..2388a2d0b3a6 100644
--- a/sound/soc/meson/aiu-fifo-i2s.c
+++ b/sound/soc/meson/aiu-fifo-i2s.c
@@ -124,7 +124,6 @@ const struct snd_soc_dai_ops aiu_fifo_i2s_dai_ops = {
.trigger = aiu_fifo_i2s_trigger,
.prepare = aiu_fifo_i2s_prepare,
.hw_params = aiu_fifo_i2s_hw_params,
- .hw_free = aiu_fifo_hw_free,
.startup = aiu_fifo_startup,
.shutdown = aiu_fifo_shutdown,
};
diff --git a/sound/soc/meson/aiu-fifo-spdif.c b/sound/soc/meson/aiu-fifo-spdif.c
index 44eb6faacf44..2fb30f89bf7a 100644
--- a/sound/soc/meson/aiu-fifo-spdif.c
+++ b/sound/soc/meson/aiu-fifo-spdif.c
@@ -158,7 +158,6 @@ const struct snd_soc_dai_ops aiu_fifo_spdif_dai_ops = {
.trigger = fifo_spdif_trigger,
.prepare = fifo_spdif_prepare,
.hw_params = fifo_spdif_hw_params,
- .hw_free = aiu_fifo_hw_free,
.startup = aiu_fifo_startup,
.shutdown = aiu_fifo_shutdown,
};
diff --git a/sound/soc/meson/aiu-fifo.c b/sound/soc/meson/aiu-fifo.c
index aa88aae8e517..4ad23267cace 100644
--- a/sound/soc/meson/aiu-fifo.c
+++ b/sound/soc/meson/aiu-fifo.c
@@ -99,11 +99,6 @@ int aiu_fifo_hw_params(struct snd_pcm_substream *substream,
struct snd_soc_component *component = dai->component;
struct aiu_fifo *fifo = dai->playback_dma_data;
dma_addr_t end;
- int ret;
-
- ret = snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(params));
- if (ret < 0)
- return ret;
/* Setup the fifo boundaries */
end = runtime->dma_addr + runtime->dma_bytes - fifo->fifo_block;
@@ -124,12 +119,6 @@ int aiu_fifo_hw_params(struct snd_pcm_substream *substream,
return 0;
}
-int aiu_fifo_hw_free(struct snd_pcm_substream *substream,
- struct snd_soc_dai *dai)
-{
- return snd_pcm_lib_free_pages(substream);
-}
-
static irqreturn_t aiu_fifo_isr(int irq, void *dev_id)
{
struct snd_pcm_substream *playback = dev_id;
@@ -187,15 +176,12 @@ void aiu_fifo_shutdown(struct snd_pcm_substream *substream,
int aiu_fifo_pcm_new(struct snd_soc_pcm_runtime *rtd,
struct snd_soc_dai *dai)
{
- struct snd_pcm_substream *substream =
- rtd->pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream;
struct snd_card *card = rtd->card->snd_card;
struct aiu_fifo *fifo = dai->playback_dma_data;
size_t size = fifo->pcm->buffer_bytes_max;
- snd_pcm_lib_preallocate_pages(substream,
- SNDRV_DMA_TYPE_DEV,
- card->dev, size, size);
+ snd_pcm_set_managed_buffer_all(rtd->pcm, SNDRV_DMA_TYPE_DEV,
+ card->dev, size, size);
return 0;
}
--
2.20.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next reply other threads:[~2020-12-18 17:02 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-18 15:45 Lars-Peter Clausen [this message]
2020-12-18 16:28 ` Jerome Brunet
2020-12-18 17:41 ` Lars-Peter Clausen
2020-12-21 8:15 ` Jerome Brunet
2020-12-28 16:03 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201218154544.25513-1-lars@metafoo.de \
--to=lars@metafoo.de \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=jbrunet@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®