From: Neil Armstrong <narmstrong@baylibre.com>
To: ulf.hansson@linaro.org, m.szyprowski@samsung.com
Cc: khilman@baylibre.com, jbrunet@baylibre.com,
martin.blumenstingl@googlemail.com, linux-mmc@vger.kernel.org,
linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Neil Armstrong <narmstrong@baylibre.com>,
Mark Rutland <mark.rutland@arm.com>
Subject: [RFC] mmc: meson-gx: use memcpy_to/fromio for dram-access-quirk
Date: Tue, 8 Jun 2021 17:33:44 +0200 [thread overview]
Message-ID: <20210608153344.3813661-1-narmstrong@baylibre.com> (raw)
It has been reported that usage of memcpy() to/from an iomem mapping is invalid,
and and recent arm64 memcpy update [1] triggers a memory abort when dram-access-quirk
is used on the G12A/G12B platforms.
This adds a local sg_copy_to_buffer which makes usage of io versions of memcpy
when dram-access-quirk is enabled.
Fixes: acdc8e71d9bb ("mmc: meson-gx: add dram-access-quirk")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[1] 285133040e6c ("arm64: Import latest memcpy()/memmove() implementation")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
Hi Ulf, Marek, Mark,
I haven't tested the patch yet, but should fix issue reported at [2].
Neil
[2] https://lore.kernel.org/r/acb244ad-0759-5a96-c659-5c23003d3dcd@samsung.com
drivers/mmc/host/meson-gx-mmc.c | 48 ++++++++++++++++++++++++++++++---
1 file changed, 44 insertions(+), 4 deletions(-)
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index b8b771b643cc..89ff6038092d 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -742,6 +742,48 @@ static void meson_mmc_desc_chain_transfer(struct mmc_host *mmc, u32 cmd_cfg)
writel(start, host->regs + SD_EMMC_START);
}
+/* local sg copy to buffer version with _to/fromio usage for dram_access_quirk */
+static void meson_mmc_copy_buffer(struct meson_host *host, struct mmc_data *data,
+ size_t buflen, bool to_buffer)
+{
+ unsigned int sg_flags = SG_MITER_ATOMIC;
+ struct scatterlist *sgl = data->sg;
+ unsigned int nents = data->sg_len;
+ struct sg_mapping_iter miter;
+ void *buf = host->bounce_buf;
+ unsigned int offset = 0;
+
+ if (to_buffer)
+ sg_flags |= SG_MITER_FROM_SG;
+ else
+ sg_flags |= SG_MITER_TO_SG;
+
+ sg_miter_start(&miter, sgl, nents, sg_flags);
+
+ while ((offset < buflen) && sg_miter_next(&miter)) {
+ unsigned int len;
+
+ len = min(miter.length, buflen - offset);
+
+ /* When dram_access_quirk, the bounce buffer is a iomem mapping */
+ if (host->dram_access_quirk) {
+ if (to_buffer)
+ memcpy_toio(buf + offset, miter.addr, len);
+ else
+ memcpy_fromio(miter.addr, buf + offset, len);
+ } else {
+ if (to_buffer)
+ memcpy(buf + offset, miter.addr, len);
+ else
+ memcpy(miter.addr, buf + offset, len);
+ }
+
+ offset += len;
+ }
+
+ sg_miter_stop(&miter);
+}
+
static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd)
{
struct meson_host *host = mmc_priv(mmc);
@@ -785,8 +827,7 @@ static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd)
if (data->flags & MMC_DATA_WRITE) {
cmd_cfg |= CMD_CFG_DATA_WR;
WARN_ON(xfer_bytes > host->bounce_buf_size);
- sg_copy_to_buffer(data->sg, data->sg_len,
- host->bounce_buf, xfer_bytes);
+ meson_mmc_copy_buffer(host, data, xfer_bytes, true);
dma_wmb();
}
@@ -955,8 +996,7 @@ static irqreturn_t meson_mmc_irq_thread(int irq, void *dev_id)
if (meson_mmc_bounce_buf_read(data)) {
xfer_bytes = data->blksz * data->blocks;
WARN_ON(xfer_bytes > host->bounce_buf_size);
- sg_copy_from_buffer(data->sg, data->sg_len,
- host->bounce_buf, xfer_bytes);
+ meson_mmc_copy_buffer(host, data, xfer_bytes, false);
}
next_cmd = meson_mmc_get_next_command(cmd);
--
2.25.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next reply other threads:[~2021-06-08 15:35 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20210608153357eucas1p24cbc7a2ddb00beada8cdd51ae2337c53@eucas1p2.samsung.com>
2021-06-08 15:33 ` Neil Armstrong [this message]
2021-06-08 15:50 ` Marek Szyprowski
2021-06-09 13:07 ` Neil Armstrong
2021-06-09 14:45 ` Robin Murphy
2021-06-09 14:55 ` Neil Armstrong
2021-06-09 15:01 ` Robin Murphy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210608153344.3813661-1-narmstrong@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=jbrunet@baylibre.com \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=mark.rutland@arm.com \
--cc=martin.blumenstingl@googlemail.com \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®