mirror of https://lore.kernel.org/linux-amlogic/
 help / color / mirror / Atom feed
From: Qianggui Song <qianggui.song@amlogic.com>
To: Thomas Gleixner <tglx@linutronix.de>, Marc Zyngier <maz@kernel.org>
Cc: Qianggui Song <qianggui.song@amlogic.com>,
	Kevin Hilman <khilman@baylibre.com>,
	Neil Armstrong <narmstrong@baylibre.com>,
	Jerome Brunet <jbrunet@baylibre.com>,
	Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
	<linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-amlogic@lists.infradead.org>
Subject: [PATCH 4/4] irqchip/meson-gpio: Add support for meson s4 SoCs
Date: Sat, 8 Jan 2022 16:42:18 +0800	[thread overview]
Message-ID: <20220108084218.31877-5-qianggui.song@amlogic.com> (raw)
In-Reply-To: <20220108084218.31877-1-qianggui.song@amlogic.com>

The meson s4 SoCs support 12 gpio irq lines compared with previous
serial chips and have something different, details are as below.

IRQ Number:
- 80:68 13 pins on bank Z
- 67:48 20 pins on bank X
- 47:36 12 pins on bank H
- 35:24 12 pins on bank D
- 23:22 2  pins on bank E
- 21:14 8  pins on bank C
- 13:0  13 pins on bank B

- PADCTRL_GPIO_IRQ_CTRL0
  bit[31]:    enable/disable the whole irq lines
  bit[12-23]: single edge trigger
  bit[0-11]:  poll trigger

- PADCTRL_GPIO_IRQ_CTRL[X]
- bit[0-16]: 7 bits to chooge gpio source for irq line 2*[X] - 2
- bit[16-22]:7 bits to chooge gpio source for irq line 2*[X] - 1
  where X = 1-6

- PADCTRL_GPIO_IRQ_CTRL[7]
  bit[0-11]: both edge trigger

Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
---
 drivers/irqchip/irq-meson-gpio.c | 51 ++++++++++++++++++++++++++++++++
 1 file changed, 51 insertions(+)

diff --git a/drivers/irqchip/irq-meson-gpio.c b/drivers/irqchip/irq-meson-gpio.c
index 98419428fcbd..c5d20a866c37 100644
--- a/drivers/irqchip/irq-meson-gpio.c
+++ b/drivers/irqchip/irq-meson-gpio.c
@@ -42,6 +42,11 @@
 #define REG_PIN_SEL_SHIFT(x)	(((x) % 4) * 8)
 #define REG_FILTER_SEL_SHIFT(x)	((x) * 4)
 
+/* use for s4 chips */
+#define REG_EDGE_POL_S4	0x1c
+#define REG_EDGE_POL_MASK_S4(x)				\
+	({typeof(x) _x = (x); BIT(_x) | BIT(12 + (_x)); })
+
 struct meson_gpio_irq_controller;
 static void meson8_gpio_irq_sel_pin(struct meson_gpio_irq_controller *ctl,
 				    unsigned int channel, unsigned long hwirq);
@@ -50,6 +55,9 @@ static void meson_a1_gpio_irq_sel_pin(struct meson_gpio_irq_controller *ctl,
 				      unsigned int channel,
 				      unsigned long hwirq);
 static void meson_a1_gpio_irq_init(struct meson_gpio_irq_controller *ctl);
+static unsigned int
+meson_s4_gpio_irq_sel_type(struct meson_gpio_irq_controller *ctl,
+			   unsigned int idx, u32 val);
 
 struct irq_ctl_ops {
 	void (*gpio_irq_sel_pin)(struct meson_gpio_irq_controller *ctl,
@@ -96,6 +104,17 @@ struct meson_gpio_irq_params {
 	.pin_sel_mask = 0x7f,					\
 	.channel_num = 8,					\
 
+#define INIT_MESON_S4_COMMON_DATA(irqs)                         \
+	INIT_MESON_COMMON(irqs, meson_a1_gpio_irq_init,         \
+			  meson_a1_gpio_irq_sel_pin,            \
+			  meson_s4_gpio_irq_sel_type)           \
+	.support_edge_both = true,				\
+	.edge_both_offset = 0,					\
+	.edge_single_offset = 12,				\
+	.pol_low_offset = 0,					\
+	.pin_sel_mask = 0xff,					\
+	.channel_num = 12,					\
+
 static const struct meson_gpio_irq_params meson8_params = {
 	INIT_MESON8_COMMON_DATA(134)
 };
@@ -126,6 +145,10 @@ static const struct meson_gpio_irq_params a1_params = {
 	INIT_MESON_A1_COMMON_DATA(62)
 };
 
+static const struct meson_gpio_irq_params s4_params = {
+	INIT_MESON_S4_COMMON_DATA(82)
+};
+
 static const struct of_device_id meson_irq_gpio_matches[] = {
 	{ .compatible = "amlogic,meson8-gpio-intc", .data = &meson8_params },
 	{ .compatible = "amlogic,meson8b-gpio-intc", .data = &meson8b_params },
@@ -135,6 +158,7 @@ static const struct of_device_id meson_irq_gpio_matches[] = {
 	{ .compatible = "amlogic,meson-g12a-gpio-intc", .data = &axg_params },
 	{ .compatible = "amlogic,meson-sm1-gpio-intc", .data = &sm1_params },
 	{ .compatible = "amlogic,meson-a1-gpio-intc", .data = &a1_params },
+	{ .compatible = "amlogic,meson-s4-gpio-intc", .data = &s4_params },
 	{ }
 };
 
@@ -202,6 +226,33 @@ static void meson_a1_gpio_irq_init(struct meson_gpio_irq_controller *ctl)
 	meson_gpio_irq_update_bits(ctl, REG_EDGE_POL, BIT(31), BIT(31));
 }
 
+static unsigned int
+meson_s4_gpio_irq_sel_type(struct meson_gpio_irq_controller *ctl,
+			   unsigned int idx, unsigned int type)
+{
+	unsigned int val = 0;
+
+	meson_gpio_irq_update_bits(ctl, REG_EDGE_POL_S4, BIT(0 + (idx)), 0);
+
+	if (type == IRQ_TYPE_EDGE_BOTH) {
+		val |= BIT(ctl->params->edge_both_offset + (idx));
+		meson_gpio_irq_update_bits(ctl, REG_EDGE_POL_S4,
+					   BIT(ctl->params->edge_both_offset + (idx)), val);
+		return 0;
+	}
+
+	if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_EDGE_FALLING))
+		val |= BIT(ctl->params->pol_low_offset + (idx));
+
+	if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
+		val |= BIT(ctl->params->edge_single_offset  + (idx));
+
+	meson_gpio_irq_update_bits(ctl, REG_EDGE_POL,
+				   REG_EDGE_POL_MASK_S4(idx), val);
+
+	return 0;
+};
+
 static int
 meson_gpio_irq_request_channel(struct meson_gpio_irq_controller *ctl,
 			       unsigned long  hwirq,
-- 
2.34.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

  parent reply	other threads:[~2022-01-08  8:43 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-08  8:42 [PATCH 0/4] irqchip/meson-gpio: Add support for Meson-S4 SoC Qianggui Song
2022-01-08  8:42 ` [PATCH 1/4] dt-bindings: interrupt-controller: New binding for Meson-S4 SoCs Qianggui Song
2022-01-09 15:27   ` Christian Hewitt
2022-01-10 12:33     ` qianggui.song
2022-01-08  8:42 ` [PATCH 2/4] irqchip/meson-gpio: support more than 8 channels gpio irq line Qianggui Song
2022-01-08 10:37   ` Marc Zyngier
2022-01-10 12:27     ` qianggui.song
2022-01-08  8:42 ` [PATCH 3/4] irqchip/meson-gpio: add select trigger type callback Qianggui Song
2022-01-08 10:44   ` Marc Zyngier
2022-01-10 12:28     ` qianggui.song
2022-01-08  8:42 ` Qianggui Song [this message]
2022-01-08 11:06   ` [PATCH 4/4] irqchip/meson-gpio: Add support for meson s4 SoCs Marc Zyngier
2022-01-10 12:32     ` qianggui.song
2022-01-10 14:54       ` Marc Zyngier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220108084218.31877-5-qianggui.song@amlogic.com \
    --to=qianggui.song@amlogic.com \
    --cc=jbrunet@baylibre.com \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=martin.blumenstingl@googlemail.com \
    --cc=maz@kernel.org \
    --cc=narmstrong@baylibre.com \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®