mirror of https://lore.kernel.org/linux-amlogic/
 help / color / mirror / Atom feed
From: Neil Armstrong <narmstrong@baylibre.com>
To: broonie@kernel.org
Cc: linux-spi@vger.kernel.org, linux-amlogic@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Neil Armstrong <narmstrong@baylibre.com>,
	Markus Schneider-Pargmann <msp@baylibre.com>
Subject: [PATCH] spi: meson-spicc: do not rely on busy flag in pow2 clk ops
Date: Thu,  8 Sep 2022 14:18:03 +0200	[thread overview]
Message-ID: <20220908121803.919943-1-narmstrong@baylibre.com> (raw)

Since [1], controller's busy flag isn't set anymore when the
__spi_transfer_message_noqueue() is used instead of the
__spi_pump_transfer_message() logic for spi_sync transfers.

Since the pow2 clock ops were limited to only be available when a
transfer is ongoing (between prepare_transfer_hardware and
unprepare_transfer_hardware callbacks), the only way to track this
down is to check for the controller cur_msg.

[1] ae7d2346dc89 ("spi: Don't use the message queue if possible in spi_sync")

Fixes: 09992025dacd ("spi: meson-spicc: add local pow2 clock ops to preserve rate between messages")
Fixes: ae7d2346dc89 ("spi: Don't use the message queue if possible in spi_sync")
Reported-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 drivers/spi/spi-meson-spicc.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/spi-meson-spicc.c b/drivers/spi/spi-meson-spicc.c
index e4cb52e1fe26..6974a1c947aa 100644
--- a/drivers/spi/spi-meson-spicc.c
+++ b/drivers/spi/spi-meson-spicc.c
@@ -537,7 +537,7 @@ static unsigned long meson_spicc_pow2_recalc_rate(struct clk_hw *hw,
 	struct clk_divider *divider = to_clk_divider(hw);
 	struct meson_spicc_device *spicc = pow2_clk_to_spicc(divider);
 
-	if (!spicc->master->cur_msg || !spicc->master->busy)
+	if (!spicc->master->cur_msg)
 		return 0;
 
 	return clk_divider_ops.recalc_rate(hw, parent_rate);
@@ -549,7 +549,7 @@ static int meson_spicc_pow2_determine_rate(struct clk_hw *hw,
 	struct clk_divider *divider = to_clk_divider(hw);
 	struct meson_spicc_device *spicc = pow2_clk_to_spicc(divider);
 
-	if (!spicc->master->cur_msg || !spicc->master->busy)
+	if (!spicc->master->cur_msg)
 		return -EINVAL;
 
 	return clk_divider_ops.determine_rate(hw, req);
@@ -561,7 +561,7 @@ static int meson_spicc_pow2_set_rate(struct clk_hw *hw, unsigned long rate,
 	struct clk_divider *divider = to_clk_divider(hw);
 	struct meson_spicc_device *spicc = pow2_clk_to_spicc(divider);
 
-	if (!spicc->master->cur_msg || !spicc->master->busy)
+	if (!spicc->master->cur_msg)
 		return -EINVAL;
 
 	return clk_divider_ops.set_rate(hw, rate, parent_rate);
-- 
2.25.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

             reply	other threads:[~2022-09-08 12:18 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-09-08 12:18 Neil Armstrong [this message]
2022-09-08 12:32 ` Markus Schneider-Pargmann
2022-09-08 14:25 ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220908121803.919943-1-narmstrong@baylibre.com \
    --to=narmstrong@baylibre.com \
    --cc=broonie@kernel.org \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=msp@baylibre.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®