mirror of https://lore.kernel.org/linux-amlogic/
 help / color / mirror / Atom feed
From: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
To: Liang Yang <liang.yang@amlogic.com>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Richard Weinberger <richard@nod.at>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	Neil Armstrong <neil.armstrong@linaro.org>,
	Kevin Hilman <khilman@baylibre.com>,
	Jerome Brunet <jbrunet@baylibre.com>,
	Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: <oxffffaa@gmail.com>, <kernel@sberdevices.ru>,
	Arseniy Krasnov <AVKrasnov@sberdevices.ru>,
	<linux-mtd@lists.infradead.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-amlogic@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>
Subject: [RFC PATCH v5 5/6] mtd: rawnand: meson: check buffer length
Date: Thu, 1 Jun 2023 09:18:48 +0300	[thread overview]
Message-ID: <20230601061850.3907800-6-AVKrasnov@sberdevices.ru> (raw)
In-Reply-To: <20230601061850.3907800-1-AVKrasnov@sberdevices.ru>

This NAND controller has limited buffer length, so check it before
command execution to avoid length trim. Also check MTD write size on
chip attach.

Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
---
 Changelog v4->v5:
 * Move length checks from functions 'meson_nfc_read/write_buf()' to
   'meson_nfc_exec_op()'.

 drivers/mtd/nand/raw/meson_nand.c | 22 +++++++++++++++++++---
 1 file changed, 19 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
index 23a73268421b..2a91916566f4 100644
--- a/drivers/mtd/nand/raw/meson_nand.c
+++ b/drivers/mtd/nand/raw/meson_nand.c
@@ -111,6 +111,8 @@
 #define NFC_USER_BYTES		2
 #define NFC_OOB_PER_ECC(nand)	((nand)->ecc.bytes + NFC_USER_BYTES)
 
+#define NFC_CMD_RAW_LEN		GENMASK(13, 0)
+
 struct meson_nfc_nand_chip {
 	struct list_head node;
 	struct nand_chip nand;
@@ -284,7 +286,7 @@ static void meson_nfc_cmd_access(struct nand_chip *nand, int raw, bool dir,
 
 	if (raw) {
 		len = mtd->writesize + mtd->oobsize;
-		cmd = (len & GENMASK(13, 0)) | scrambler | DMA_DIR(dir);
+		cmd = len | scrambler | DMA_DIR(dir);
 		writel(cmd, nfc->reg_base + NFC_REG_CMD);
 		return;
 	}
@@ -573,7 +575,7 @@ static int meson_nfc_read_buf(struct nand_chip *nand, u8 *buf, int len)
 	if (ret)
 		goto out;
 
-	cmd = NFC_CMD_N2M | (len & GENMASK(13, 0));
+	cmd = NFC_CMD_N2M | len;
 	writel(cmd, nfc->reg_base + NFC_REG_CMD);
 
 	meson_nfc_drain_cmd(nfc);
@@ -597,7 +599,7 @@ static int meson_nfc_write_buf(struct nand_chip *nand, u8 *buf, int len)
 	if (ret)
 		return ret;
 
-	cmd = NFC_CMD_M2N | (len & GENMASK(13, 0));
+	cmd = NFC_CMD_M2N | len;
 	writel(cmd, nfc->reg_base + NFC_REG_CMD);
 
 	meson_nfc_drain_cmd(nfc);
@@ -1044,6 +1046,9 @@ static int meson_nfc_exec_op(struct nand_chip *nand,
 			break;
 
 		case NAND_OP_DATA_IN_INSTR:
+			if (instr->ctx.data.len > NFC_CMD_RAW_LEN)
+				return -EINVAL;
+
 			buf = meson_nand_op_get_dma_safe_input_buf(instr);
 			if (!buf)
 				return -ENOMEM;
@@ -1052,6 +1057,9 @@ static int meson_nfc_exec_op(struct nand_chip *nand,
 			break;
 
 		case NAND_OP_DATA_OUT_INSTR:
+			if (instr->ctx.data.len > NFC_CMD_RAW_LEN)
+				return -EINVAL;
+
 			buf = meson_nand_op_get_dma_safe_output_buf(instr);
 			if (!buf)
 				return -ENOMEM;
@@ -1293,6 +1301,7 @@ static int meson_nand_attach_chip(struct nand_chip *nand)
 	struct meson_nfc_nand_chip *meson_chip = to_meson_nand(nand);
 	struct mtd_info *mtd = nand_to_mtd(nand);
 	int nsectors = mtd->writesize / 1024;
+	int raw_writesize;
 	int ret;
 
 	if (!mtd->name) {
@@ -1304,6 +1313,13 @@ static int meson_nand_attach_chip(struct nand_chip *nand)
 			return -ENOMEM;
 	}
 
+	raw_writesize = mtd->writesize + mtd->oobsize;
+	if (raw_writesize > NFC_CMD_RAW_LEN) {
+		dev_err(nfc->dev, "too big write size in raw mode: %d > %ld\n",
+			raw_writesize, NFC_CMD_RAW_LEN);
+		return -EINVAL;
+	}
+
 	if (nand->bbt_options & NAND_BBT_USE_FLASH)
 		nand->bbt_options |= NAND_BBT_NO_OOB;
 
-- 
2.35.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

  parent reply	other threads:[~2023-06-01  6:24 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-06-01  6:18 [RFC PATCH v5 0/6] refactoring, fixes and updates for Meson NAND Arseniy Krasnov
2023-06-01  6:18 ` [RFC PATCH v5 1/6] mtd: rawnand: meson: fix ready/busy command Arseniy Krasnov
2023-06-01  7:51   ` Miquel Raynal
2023-06-01 22:44     ` Arseniy Krasnov
2023-06-05  7:08       ` Miquel Raynal
2023-06-01  6:18 ` [RFC PATCH v5 2/6] mtd: rawnand: meson: wait for command in polling mode Arseniy Krasnov
2023-06-01  7:57   ` Arseniy Krasnov
2023-06-01  8:07   ` Miquel Raynal
2023-06-01 23:09     ` Arseniy Krasnov
2023-06-05  9:05       ` Miquel Raynal
2023-06-05 13:19         ` Liang Yang
2023-06-05 13:30           ` Liang Yang
2023-06-05 16:58             ` Arseniy Krasnov
2023-06-06  7:03               ` Miquel Raynal
2023-06-06  7:40                 ` Arseniy Krasnov
2023-06-06  7:55                   ` Miquel Raynal
2023-06-06 11:49             ` Arseniy Krasnov
2023-06-06 12:11               ` Miquel Raynal
2023-06-06 12:10                 ` Arseniy Krasnov
2023-06-01  6:18 ` [RFC PATCH v5 3/6] mtd: rawnand: meson: only expose unprotected user OOB bytes Arseniy Krasnov
2023-06-01  8:31   ` Miquel Raynal
2023-06-02  8:53     ` Arseniy Krasnov
2023-06-05  9:48       ` Miquel Raynal
2023-06-06  4:42         ` Arseniy Krasnov
2023-06-06  7:11           ` Miquel Raynal
2023-06-06  7:41             ` Arseniy Krasnov
2023-06-01  6:18 ` [RFC PATCH v5 4/6] mtd: rawnand: meson: use macro for OOB area Arseniy Krasnov
2023-06-01  8:34   ` Miquel Raynal
2023-06-01  6:18 ` Arseniy Krasnov [this message]
2023-06-01  6:18 ` [RFC PATCH v5 6/6] mtd: rawnand: meson: remove unneeded bitwise OR with zeroes Arseniy Krasnov
2023-06-01  7:50 ` [RFC PATCH v5 0/6] refactoring, fixes and updates for Meson NAND Miquel Raynal
2023-06-01  7:51   ` Arseniy Krasnov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230601061850.3907800-6-AVKrasnov@sberdevices.ru \
    --to=avkrasnov@sberdevices.ru \
    --cc=jbrunet@baylibre.com \
    --cc=kernel@sberdevices.ru \
    --cc=khilman@baylibre.com \
    --cc=liang.yang@amlogic.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=martin.blumenstingl@googlemail.com \
    --cc=miquel.raynal@bootlin.com \
    --cc=neil.armstrong@linaro.org \
    --cc=oxffffaa@gmail.com \
    --cc=richard@nod.at \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®