From: "Adrián Larumbe" <adrian.larumbe@collabora.com>
To: narmstrong@baylibre.com, khilman@baylibre.com,
linux-amlogic@lists.infradead.org,
dri-devel@lists.freedesktop.org, rfoss@kernel.org,
andrzej.hajda@intel.com
Cc: adrian.larumbe@collabora.com, kernel@collabora.com
Subject: [PATCH v2 1/3] drm/meson: dw-hdmi: change YUV420 selection logic at clock setup
Date: Mon, 12 Jun 2023 12:23:52 +0100 [thread overview]
Message-ID: <20230612112354.4034489-2-adrian.larumbe@collabora.com> (raw)
In-Reply-To: <20230612112354.4034489-1-adrian.larumbe@collabora.com>
Right now clocking value selection code is prioritising RGB, YUV444 modes
over YUV420 for HDMI2 sinks. However, because of the bus format selection
procedure in dw-hdmi, for HDMI2 sinks YUV420 is the format that will always
be picked during the drm bridge chain check stage.
Later on dw_hdmi_setup will configure a colour space based on the bus
format that doesn't match the pixel value we had calculated as described
above.
Fix it by bringing back dw-hdmi bus format check when picking the right
pixel clock.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
---
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 6 ++++++
drivers/gpu/drm/meson/meson_dw_hdmi.c | 4 ++--
include/drm/bridge/dw_hdmi.h | 2 ++
3 files changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index 3b40e0fdca5c..e6a456b72610 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -3346,6 +3346,12 @@ static int dw_hdmi_parse_dt(struct dw_hdmi *hdmi)
return 0;
}
+bool dw_hdmi_bus_fmt_is_420(struct dw_hdmi *hdmi)
+{
+ return hdmi_bus_fmt_is_yuv420(hdmi->hdmi_data.enc_out_bus_format);
+}
+EXPORT_SYMBOL_GPL(dw_hdmi_bus_fmt_is_420);
+
struct dw_hdmi *dw_hdmi_probe(struct platform_device *pdev,
const struct dw_hdmi_plat_data *plat_data)
{
diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c
index 3d046878ce6c..b49bb0d86efe 100644
--- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
+++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
@@ -379,8 +379,8 @@ static int dw_hdmi_phy_init(struct dw_hdmi *hdmi, void *data,
mode->clock > 340000 ? 40 : 10);
if (drm_mode_is_420_only(display, mode) ||
- (!is_hdmi2_sink &&
- drm_mode_is_420_also(display, mode)))
+ (!is_hdmi2_sink && drm_mode_is_420_also(display, mode)) ||
+ dw_hdmi_bus_fmt_is_420(hdmi))
mode_is_420 = true;
/* Enable clocks */
diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h
index f668e75fbabe..6a46baa0737c 100644
--- a/include/drm/bridge/dw_hdmi.h
+++ b/include/drm/bridge/dw_hdmi.h
@@ -206,4 +206,6 @@ void dw_hdmi_phy_update_hpd(struct dw_hdmi *hdmi, void *data,
bool force, bool disabled, bool rxsense);
void dw_hdmi_phy_setup_hpd(struct dw_hdmi *hdmi, void *data);
+bool dw_hdmi_bus_fmt_is_420(struct dw_hdmi *hdmi);
+
#endif /* __IMX_HDMI_H__ */
--
2.40.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2023-06-12 11:24 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-12 11:23 [PATCH v2 0/3] Add additional YUV420 bus format check for dw-meson's bridge enable Adrián Larumbe
2023-06-12 11:23 ` Adrián Larumbe [this message]
2023-06-12 11:23 ` [PATCH v2 2/3] dw-hdmi: truly enforce 420-only formats when drm mode demands it Adrián Larumbe
2023-06-12 11:23 ` [PATCH v2 3/3] dw-hdmi: remove dead code and fix indentation Adrián Larumbe
2023-06-12 12:34 ` [PATCH v2 0/3] Add additional YUV420 bus format check for dw-meson's bridge enable Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230612112354.4034489-2-adrian.larumbe@collabora.com \
--to=adrian.larumbe@collabora.com \
--cc=andrzej.hajda@intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=kernel@collabora.com \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=narmstrong@baylibre.com \
--cc=rfoss@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®