From: Jerome Brunet <jbrunet@baylibre.com>
To: Mark Brown <broonie@kernel.org>
Cc: Jerome Brunet <jbrunet@baylibre.com>,
Liam Girdwood <lgirdwood@gmail.com>,
alsa-devel@alsa-project.org, linux-amlogic@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH] ASoC: meson: axg-tdm-formatter: fix channel slot allocation
Date: Wed, 9 Aug 2023 19:19:31 +0200 [thread overview]
Message-ID: <20230809171931.1244502-1-jbrunet@baylibre.com> (raw)
When the tdm lane mask is computed, the driver currently fills the 1st lane
before moving on to the next. If the stream has less channels than the
lanes can accommodate, slots will be disabled on the last lanes.
Unfortunately, the HW distribute channels in a different way. It distribute
channels in pair on each lanes before moving on the next slots.
This difference leads to problems if a device has an interface with more
than 1 lane and with more than 2 slots per lane.
For example: a playback interface with 2 lanes and 4 slots each (total 8
slots - zero based numbering)
- Playing a 8ch stream:
- All slots activated by the driver
- channel #2 will be played on lane #1 - slot #0 following HW placement
- Playing a 4ch stream:
- Lane #1 disabled by the driver
- channel #2 will be played on lane #0 - slot #2
This behaviour is obviously not desirable.
Change the way slots are activated on the TDM lanes to follow what the HW
does and make sure each channel always get mapped to the same slot/lane.
Fixes: 1a11d88f499c ("ASoC: meson: add tdm formatter base driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
sound/soc/meson/axg-tdm-formatter.c | 42 ++++++++++++++++++-----------
1 file changed, 26 insertions(+), 16 deletions(-)
diff --git a/sound/soc/meson/axg-tdm-formatter.c b/sound/soc/meson/axg-tdm-formatter.c
index 9883dc777f63..63333a2b0a9c 100644
--- a/sound/soc/meson/axg-tdm-formatter.c
+++ b/sound/soc/meson/axg-tdm-formatter.c
@@ -30,27 +30,32 @@ int axg_tdm_formatter_set_channel_masks(struct regmap *map,
struct axg_tdm_stream *ts,
unsigned int offset)
{
- unsigned int val, ch = ts->channels;
- unsigned long mask;
- int i, j;
+ unsigned int ch = ts->channels;
+ u32 val[AXG_TDM_NUM_LANES];
+ int i, j, k;
+
+ /*
+ * We need to mimick the slot distribution used by the HW to keep the
+ * channel placement consistent regardless of the number of channel
+ * in the stream. This is why the odd algorithm below is used.
+ */
+ memset(val, 0, sizeof(*val) * AXG_TDM_NUM_LANES);
/*
* Distribute the channels of the stream over the available slots
- * of each TDM lane
+ * of each TDM lane. We need to go over the 32 slots ...
*/
- for (i = 0; i < AXG_TDM_NUM_LANES; i++) {
- val = 0;
- mask = ts->mask[i];
-
- for (j = find_first_bit(&mask, 32);
- (j < 32) && ch;
- j = find_next_bit(&mask, 32, j + 1)) {
- val |= 1 << j;
- ch -= 1;
+ for (i = 0; (i < 32) && ch; i += 2) {
+ /* ... of all the lanes ... */
+ for (j = 0; j < AXG_TDM_NUM_LANES; j++) {
+ /* ... then distribute the channels in pairs */
+ for (k = 0; k < 2; k++) {
+ if ((BIT(i + k) & ts->mask[j]) && ch) {
+ val[j] |= BIT(i + k);
+ ch -= 1;
+ }
+ }
}
-
- regmap_write(map, offset, val);
- offset += regmap_get_reg_stride(map);
}
/*
@@ -63,6 +68,11 @@ int axg_tdm_formatter_set_channel_masks(struct regmap *map,
return -EINVAL;
}
+ for (i = 0; i < AXG_TDM_NUM_LANES; i++) {
+ regmap_write(map, offset, val[i]);
+ offset += regmap_get_reg_stride(map);
+ }
+
return 0;
}
EXPORT_SYMBOL_GPL(axg_tdm_formatter_set_channel_masks);
--
2.40.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next reply other threads:[~2023-08-09 17:20 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-09 17:19 Jerome Brunet [this message]
2023-08-10 14:44 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230809171931.1244502-1-jbrunet@baylibre.com \
--to=jbrunet@baylibre.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®