From: Jerome Brunet <jbrunet@baylibre.com>
To: Mark Brown <broonie@kernel.org>, Liam Girdwood <lgirdwood@gmail.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>,
alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org,
linux-amlogic@lists.infradead.org
Subject: [PATCH] ASoC: meson: spdifin: start hw on dai probe
Date: Thu, 7 Sep 2023 11:05:04 +0200 [thread overview]
Message-ID: <20230907090504.12700-1-jbrunet@baylibre.com> (raw)
For spdif input to report the locked rate correctly, even when no capture
is running, the HW and reference clock must be started as soon as
the dai is probed.
Fixes: 5ce5658375e6 ("ASoC: meson: add axg spdif input")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
sound/soc/meson/axg-spdifin.c | 49 ++++++++++++-----------------------
1 file changed, 17 insertions(+), 32 deletions(-)
diff --git a/sound/soc/meson/axg-spdifin.c b/sound/soc/meson/axg-spdifin.c
index d86880169075..bc2f2849ecfb 100644
--- a/sound/soc/meson/axg-spdifin.c
+++ b/sound/soc/meson/axg-spdifin.c
@@ -112,34 +112,6 @@ static int axg_spdifin_prepare(struct snd_pcm_substream *substream,
return 0;
}
-static int axg_spdifin_startup(struct snd_pcm_substream *substream,
- struct snd_soc_dai *dai)
-{
- struct axg_spdifin *priv = snd_soc_dai_get_drvdata(dai);
- int ret;
-
- ret = clk_prepare_enable(priv->refclk);
- if (ret) {
- dev_err(dai->dev,
- "failed to enable spdifin reference clock\n");
- return ret;
- }
-
- regmap_update_bits(priv->map, SPDIFIN_CTRL0, SPDIFIN_CTRL0_EN,
- SPDIFIN_CTRL0_EN);
-
- return 0;
-}
-
-static void axg_spdifin_shutdown(struct snd_pcm_substream *substream,
- struct snd_soc_dai *dai)
-{
- struct axg_spdifin *priv = snd_soc_dai_get_drvdata(dai);
-
- regmap_update_bits(priv->map, SPDIFIN_CTRL0, SPDIFIN_CTRL0_EN, 0);
- clk_disable_unprepare(priv->refclk);
-}
-
static void axg_spdifin_write_mode_param(struct regmap *map, int mode,
unsigned int val,
unsigned int num_per_reg,
@@ -251,17 +223,32 @@ static int axg_spdifin_dai_probe(struct snd_soc_dai *dai)
ret = axg_spdifin_sample_mode_config(dai, priv);
if (ret) {
dev_err(dai->dev, "mode configuration failed\n");
- clk_disable_unprepare(priv->pclk);
- return ret;
+ goto pclk_err;
}
+ ret = clk_prepare_enable(priv->refclk);
+ if (ret) {
+ dev_err(dai->dev,
+ "failed to enable spdifin reference clock\n");
+ goto pclk_err;
+ }
+
+ regmap_update_bits(priv->map, SPDIFIN_CTRL0, SPDIFIN_CTRL0_EN,
+ SPDIFIN_CTRL0_EN);
+
return 0;
+
+pclk_err:
+ clk_disable_unprepare(priv->pclk);
+ return ret;
}
static int axg_spdifin_dai_remove(struct snd_soc_dai *dai)
{
struct axg_spdifin *priv = snd_soc_dai_get_drvdata(dai);
+ regmap_update_bits(priv->map, SPDIFIN_CTRL0, SPDIFIN_CTRL0_EN, 0);
+ clk_disable_unprepare(priv->refclk);
clk_disable_unprepare(priv->pclk);
return 0;
}
@@ -270,8 +257,6 @@ static const struct snd_soc_dai_ops axg_spdifin_ops = {
.probe = axg_spdifin_dai_probe,
.remove = axg_spdifin_dai_remove,
.prepare = axg_spdifin_prepare,
- .startup = axg_spdifin_startup,
- .shutdown = axg_spdifin_shutdown,
};
static int axg_spdifin_iec958_info(struct snd_kcontrol *kcontrol,
--
2.40.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next reply other threads:[~2023-09-07 9:05 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-07 9:05 Jerome Brunet [this message]
2023-09-11 15:07 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230907090504.12700-1-jbrunet@baylibre.com \
--to=jbrunet@baylibre.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®