[PATCH v2 2/2] pwm: meson: Add check for error from clk_round_rate()

[George Stark <gnstark@salutedevices.com>]

clk_round_rate() can return not only zero if requested frequency can not
be provided but also negative error code so add check for it too.

Also change type of variable holding clk_round_rate() result from
unsigned long to long. It's safe due to clk_round_rate() returns long.

Fixes: 329db102a26d ("pwm: meson: make full use of common clock framework")
Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
Signed-off-by: George Stark <gnstark@salutedevices.com>
---
 drivers/pwm/pwm-meson.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c
index f4d70da621ec..d4228ac1e7ea 100644
--- a/drivers/pwm/pwm-meson.c
+++ b/drivers/pwm/pwm-meson.c
@@ -148,7 +148,7 @@ static int meson_pwm_calc(struct pwm_chip *chip, struct pwm_device *pwm,
 	struct meson_pwm *meson = to_meson_pwm(chip);
 	struct meson_pwm_channel *channel = &meson->channels[pwm->hwpwm];
 	unsigned int cnt, duty_cnt;
-	unsigned long fin_freq;
+	long fin_freq;
 	u64 duty, period, freq;
 
 	duty = state->duty_cycle;
@@ -168,9 +168,10 @@ static int meson_pwm_calc(struct pwm_chip *chip, struct pwm_device *pwm,
 		freq = ULONG_MAX;
 
 	fin_freq = clk_round_rate(channel->clk, freq);
-	if (fin_freq == 0) {
-		dev_err(pwmchip_parent(chip), "invalid source clock frequency\n");
-		return -EINVAL;
+	if (fin_freq <= 0) {
+		dev_err(pwmchip_parent(chip),
+			"invalid source clock frequency %llu\n", freq);
+		return fin_freq ? fin_freq : -EINVAL;
 	}
 
 	dev_dbg(pwmchip_parent(chip), "fin_freq: %lu Hz\n", fin_freq);
-- 
2.25.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic