From: Jerome Brunet <jbrunet@baylibre.com>
To: Mark Brown <broonie@kernel.org>, Liam Girdwood <lgirdwood@gmail.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>,
alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org,
linux-amlogic@lists.infradead.org
Subject: [PATCH 3/4] ASoC: meson: axg-tdm-interface: manage formatters in trigger
Date: Fri, 26 Apr 2024 17:29:40 +0200 [thread overview]
Message-ID: <20240426152946.3078805-4-jbrunet@baylibre.com> (raw)
In-Reply-To: <20240426152946.3078805-1-jbrunet@baylibre.com>
So far, the formatters have been reset/enabled using the .prepare()
callback. This was done in this callback because walking the formatters use
a mutex. A mutex is used because formatter handling require dealing
possibly slow clock operation.
With the support of non-atomic, .trigger() callback may be used which also
allows to properly enable and disable formatters on start but also
pause/resume.
This solve a random shift on TDMIN as well repeated samples on for TDMOUT.
Fixes: d60e4f1e4be5 ("ASoC: meson: add tdm interface driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
sound/soc/meson/axg-tdm-interface.c | 34 ++++++++++++++++-------------
1 file changed, 19 insertions(+), 15 deletions(-)
diff --git a/sound/soc/meson/axg-tdm-interface.c b/sound/soc/meson/axg-tdm-interface.c
index bf708717635b..8bf3735dedaa 100644
--- a/sound/soc/meson/axg-tdm-interface.c
+++ b/sound/soc/meson/axg-tdm-interface.c
@@ -349,26 +349,31 @@ static int axg_tdm_iface_hw_params(struct snd_pcm_substream *substream,
return 0;
}
-static int axg_tdm_iface_hw_free(struct snd_pcm_substream *substream,
+static int axg_tdm_iface_trigger(struct snd_pcm_substream *substream,
+ int cmd,
struct snd_soc_dai *dai)
{
- struct axg_tdm_stream *ts = snd_soc_dai_get_dma_data(dai, substream);
+ struct axg_tdm_stream *ts =
+ snd_soc_dai_get_dma_data(dai, substream);
- /* Stop all attached formatters */
- axg_tdm_stream_stop(ts);
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ case SNDRV_PCM_TRIGGER_RESUME:
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ axg_tdm_stream_start(ts);
+ break;
+ case SNDRV_PCM_TRIGGER_SUSPEND:
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ case SNDRV_PCM_TRIGGER_STOP:
+ axg_tdm_stream_stop(ts);
+ break;
+ default:
+ return -EINVAL;
+ }
return 0;
}
-static int axg_tdm_iface_prepare(struct snd_pcm_substream *substream,
- struct snd_soc_dai *dai)
-{
- struct axg_tdm_stream *ts = snd_soc_dai_get_dma_data(dai, substream);
-
- /* Force all attached formatters to update */
- return axg_tdm_stream_reset(ts);
-}
-
static int axg_tdm_iface_remove_dai(struct snd_soc_dai *dai)
{
int stream;
@@ -412,8 +417,7 @@ static const struct snd_soc_dai_ops axg_tdm_iface_ops = {
.set_fmt = axg_tdm_iface_set_fmt,
.startup = axg_tdm_iface_startup,
.hw_params = axg_tdm_iface_hw_params,
- .prepare = axg_tdm_iface_prepare,
- .hw_free = axg_tdm_iface_hw_free,
+ .trigger = axg_tdm_iface_trigger,
};
/* TDM Backend DAIs */
--
2.43.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2024-04-26 15:30 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-26 15:29 [PATCH 0/4] ASoC: meson: tdm fixes Jerome Brunet
2024-04-26 15:29 ` [PATCH 1/4] ASoC: meson: axg-fifo: use threaded irq to check periods Jerome Brunet
2024-04-26 15:29 ` [PATCH 2/4] ASoC: meson: axg-card: make links nonatomic Jerome Brunet
2024-04-26 15:29 ` Jerome Brunet [this message]
2024-04-26 15:29 ` [PATCH 4/4] ASoC: meson: axg-tdm: add continuous clock support Jerome Brunet
2024-05-01 13:43 ` [PATCH 0/4] ASoC: meson: tdm fixes Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240426152946.3078805-4-jbrunet@baylibre.com \
--to=jbrunet@baylibre.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®