[PATCH 0/8] reset: amlogic: move audio reset drivers out of CCF

[Jerome Brunet <jbrunet@baylibre.com>]

This patchset follows the discussion about having reset driver in the
clock tree [1]. Ideally those should reside in the reset part of tree.

Also the code of the amlogic reset driver is very similar between the 2
trees and could use the same driver code.

This patchset moves the reset driver of audio clock controller of the
g12 and sm1 SoC family to the reset tree, using the auxiliary bus.

The infrastructure put in place is meant to be generic enough so we may
eventually also move the reset drivers in the meson8b and aoclk clock
controllers.

Change since RFC [2]:
 * Move the aux registration helper out of clock too.

[1] https://lore.kernel.org/linux-clk/e3a85852b911fdf16dd9ae158f42b3ef.sboyd@kernel.org
[2] https://lore.kernel.org/linux-clk/20240516150842.705844-1-jbrunet@baylibre.com

Jerome Brunet (8):
  reset: amlogic: convert driver to regmap
  reset: amlogic: add driver parameters
  reset: amlogic: split the device and platform probe
  reset: amlogic: use reset number instead of register count
  reset: amlogic: add reset status support
  reset: amlogic: add toggle reset support
  reset: amlogic: add auxiliary reset driver support
  clk: amlogic: axg-audio: use the auxiliary reset driver

 drivers/clk/meson/Kconfig                   |   1 +
 drivers/clk/meson/axg-audio.c               | 109 +-------
 drivers/reset/Kconfig                       |   1 +
 drivers/reset/reset-meson.c                 | 285 ++++++++++++++++----
 include/soc/amlogic/meson-auxiliary-reset.h |  23 ++
 5 files changed, 271 insertions(+), 148 deletions(-)
 create mode 100644 include/soc/amlogic/meson-auxiliary-reset.h

-- 
2.43.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic