From: Xianwei Zhao via B4 Relay <devnull+xianwei.zhao.amlogic.com@kernel.org>
To: Linus Walleij <linus.walleij@linaro.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Neil Armstrong <neil.armstrong@linaro.org>,
Kevin Hilman <khilman@baylibre.com>,
Jerome Brunet <jbrunet@baylibre.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org,
Xianwei Zhao <xianwei.zhao@amlogic.com>
Subject: [PATCH RFC 1/3] dt-bindings: pinctrl: Add support for Amlogic SoCs
Date: Wed, 11 Dec 2024 14:47:49 +0800 [thread overview]
Message-ID: <20241211-amlogic-pinctrl-v1-1-410727335119@amlogic.com> (raw)
In-Reply-To: <20241211-amlogic-pinctrl-v1-0-410727335119@amlogic.com>
From: Xianwei Zhao <xianwei.zhao@amlogic.com>
Add the dt-bindings for Amlogic pin controller, and add a new
dt-binding header file which document the GPIO bank names and
alternative func value of all Amlogic subsequent SoCs.
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
---
.../bindings/pinctrl/amlogic,pinctrl.yaml | 150 +++++++++++++++++++++
include/dt-bindings/pinctrl/amlogic,pinctrl.h | 68 ++++++++++
2 files changed, 218 insertions(+)
diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,pinctrl.yaml
new file mode 100644
index 000000000000..b0c2ae585d7d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/amlogic,pinctrl.yaml
@@ -0,0 +1,150 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/amlogic,pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic pinmux controller
+
+maintainers:
+ - Xianwei Zhao <xianwei.zhao@amlogic.com>
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+properties:
+ compatible:
+ const: amlogic,pinctrl
+
+ reg:
+ minItems: 2
+
+ reg-names:
+ items:
+ - const: mux
+ - const: gpio
+
+ "#address-cells":
+ const: 2
+
+ "#size-cells":
+ const: 2
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - "#address-cells"
+ - "#size-cells"
+
+patternProperties:
+ "^gpio[a-z]":
+ type: object
+
+ properties:
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+
+ bank-name:
+ $ref: /schemas/types.yaml#/definitions/string
+
+ npins:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+ maximum: 32
+
+ bank-index:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 29
+
+ reg-mux-offset:
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ bit-mux-offset:
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ reg-gpio-offset:
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ required:
+ - gpio-controller
+ - "#gpio-cells"
+ - npins
+ - bank-index
+ - reg-mux-offset
+ - reg-gpio-offset
+ - bank-name
+
+ additionalProperties: false
+ unevaluatedProperties: false
+
+ "^func-[0-9a-z]":
+ type: object
+ additionalProperties:
+ type: object
+ allOf:
+ - $ref: pincfg-node.yaml#
+ - $ref: pinmux-node.yaml#
+
+additionalProperties: false
+
+examples:
+ - |
+ apb {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ periphs_pinctrl: pinctrl@8e700 {
+ compatible = "amlogic,pinctrl";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ reg = <0x0 0x8e700 0x0 0x04>,
+ <0x0 0x8e704 0x0 0x60>;
+ reg-names = "mux", "gpio";
+
+ gpiob {
+ gpio-controller;
+ #gpio-cells = <2>;
+ npins = <10>;
+ bank-index = <1>;
+ reg-mux-offset = <0x14>;
+ bit-mux-offset = <0x14>;
+ reg-gpio-offset = <0x30>;
+ bank-name = "GPIOB";
+ };
+
+ gpioe {
+ gpio-controller;
+ #gpio-cells = <2>;
+ npins = <10>;
+ bank-index = <5>;
+ reg-mux-offset = <0x14>;
+ reg-gpio-offset = <0x30>;
+ bank-name = "GPIOE";
+ };
+
+ func-uart-b {
+ uart-b-default{
+ pinmux = <3>;
+ bias-pull-up;
+ drive-strength-microamp = <4000>;
+ };
+
+ uart-c-default{
+ pinmux = <4>;
+ bias-pull-up;
+ drive-strength-microamp = <4000>;
+ };
+ };
+
+ func-uart-c {
+ uart-c-default{
+ pinmux = <3>;
+ bias-pull-up;
+ drive-strength-microamp = <4000>;
+ };
+ };
+ };
+ };
diff --git a/include/dt-bindings/pinctrl/amlogic,pinctrl.h b/include/dt-bindings/pinctrl/amlogic,pinctrl.h
new file mode 100644
index 000000000000..03db0a730e8b
--- /dev/null
+++ b/include/dt-bindings/pinctrl/amlogic,pinctrl.h
@@ -0,0 +1,68 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
+/*
+ * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
+ * Author: Xianwei Zhao <xianwei.zhao@amlogic.com>
+ */
+
+#ifndef _DT_BINDINGS_AMLOGIC_PINCTRL_H
+#define _DT_BINDINGS_AMLOGIC_PINCTRL_H
+
+/* define PIN modes */
+#define AF0 0x0
+#define AF1 0x1
+#define AF2 0x2
+#define AF3 0x3
+#define AF4 0x4
+#define AF5 0x5
+#define AF6 0x6
+#define AF7 0x7
+#define AF8 0x8
+#define AF9 0x9
+#define AF10 0xa
+#define AF11 0xb
+#define AF12 0xc
+#define AF13 0xd
+#define AF14 0xe
+#define AF15 0xf
+
+#define AML_PIN_ALT_FUNC_MASK 0xf
+
+/* Normal PIN bank */
+#define AMLOGIC_GPIO_A 0
+#define AMLOGIC_GPIO_B 1
+#define AMLOGIC_GPIO_C 2
+#define AMLOGIC_GPIO_D 3
+#define AMLOGIC_GPIO_E 4
+#define AMLOGIC_GPIO_F 5
+#define AMLOGIC_GPIO_G 6
+#define AMLOGIC_GPIO_H 7
+#define AMLOGIC_GPIO_I 8
+#define AMLOGIC_GPIO_J 9
+#define AMLOGIC_GPIO_K 10
+#define AMLOGIC_GPIO_L 11
+#define AMLOGIC_GPIO_M 12
+#define AMLOGIC_GPIO_N 13
+#define AMLOGIC_GPIO_O 14
+#define AMLOGIC_GPIO_P 15
+#define AMLOGIC_GPIO_Q 16
+#define AMLOGIC_GPIO_R 17
+#define AMLOGIC_GPIO_S 18
+#define AMLOGIC_GPIO_T 19
+#define AMLOGIC_GPIO_U 20
+#define AMLOGIC_GPIO_V 21
+#define AMLOGIC_GPIO_W 22
+#define AMLOGIC_GPIO_X 23
+#define AMLOGIC_GPIO_Y 24
+#define AMLOGIC_GPIO_Z 25
+
+/* Special PIN bank */
+#define AMLOGIC_GPIO_DV 26
+#define AMLOGIC_GPIO_AO 27
+#define AMLOGIC_GPIO_CC 28
+#define AMLOGIC_GPIO_TEST_N 29
+
+#define AML_PINMUX(bank, offset, mode) (((((bank) << 8) + (offset)) << 8) | (mode))
+#define AML_PINMUX_TO_BANK(pinmux) (((pinmux) >> 16) & 0xff)
+#define AML_PINMUX_TO_OFFSET(pinmux) (((pinmux) >> 8) & 0xff)
+
+#endif /* _DT_BINDINGS_AMLOGIC_PINCTRL_H */
--
2.37.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2024-12-11 6:50 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-11 6:47 [PATCH RFC 0/3] Pinctrl: Add Amlogic pinctrl driver Xianwei Zhao via B4 Relay
2024-12-11 6:47 ` Xianwei Zhao via B4 Relay [this message]
2024-12-17 14:20 ` [PATCH RFC 1/3] dt-bindings: pinctrl: Add support for Amlogic SoCs Rob Herring
2024-12-18 8:47 ` Xianwei Zhao
2024-12-11 6:47 ` [PATCH RFC 2/3] pinctrl: Add driver " Xianwei Zhao via B4 Relay
2024-12-17 14:49 ` Linus Walleij
2024-12-17 14:53 ` Neil Armstrong
2024-12-18 9:37 ` Xianwei Zhao
2024-12-22 9:08 ` Linus Walleij
2024-12-26 7:49 ` Xianwei Zhao
2024-12-27 17:19 ` Linus Walleij
2024-12-27 21:01 ` Martin Blumenstingl
2024-12-31 8:26 ` Xianwei Zhao
2024-12-11 6:47 ` [PATCH RFC 3/3] arm64: dts: amlogic: a4: add pinctrl node Xianwei Zhao via B4 Relay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241211-amlogic-pinctrl-v1-1-410727335119@amlogic.com \
--to=devnull+xianwei.zhao.amlogic.com@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jbrunet@baylibre.com \
--cc=khilman@baylibre.com \
--cc=krzk+dt@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=martin.blumenstingl@googlemail.com \
--cc=neil.armstrong@linaro.org \
--cc=robh@kernel.org \
--cc=xianwei.zhao@amlogic.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®