mirror of https://lore.kernel.org/linux-amlogic/
 help / color / mirror / Atom feed
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
To: linux-amlogic@lists.infradead.org, linux-phy@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, vkoul@kernel.org,
	kishon@kernel.org,
	Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Subject: [PATCH 2/2] phy: amlogic: meson8b-usb2: Use the regmap_{clear,set}_bits helpers
Date: Tue, 31 Dec 2024 20:17:18 +0100	[thread overview]
Message-ID: <20241231191718.2764065-3-martin.blumenstingl@googlemail.com> (raw)
In-Reply-To: <20241231191718.2764065-1-martin.blumenstingl@googlemail.com>

These require less code, reduce the chance of typos and overall make the
intent clearer. No functional changes.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 drivers/phy/amlogic/phy-meson8b-usb2.c | 28 ++++++++++----------------
 1 file changed, 11 insertions(+), 17 deletions(-)

diff --git a/drivers/phy/amlogic/phy-meson8b-usb2.c b/drivers/phy/amlogic/phy-meson8b-usb2.c
index d9c761b7c15c..a553231a9f7c 100644
--- a/drivers/phy/amlogic/phy-meson8b-usb2.c
+++ b/drivers/phy/amlogic/phy-meson8b-usb2.c
@@ -165,8 +165,7 @@ static int phy_meson8b_usb2_power_on(struct phy *phy)
 		return ret;
 	}
 
-	regmap_update_bits(priv->regmap, REG_CONFIG, REG_CONFIG_CLK_32k_ALTSEL,
-			   REG_CONFIG_CLK_32k_ALTSEL);
+	regmap_set_bits(priv->regmap, REG_CONFIG, REG_CONFIG_CLK_32k_ALTSEL);
 
 	regmap_update_bits(priv->regmap, REG_CTRL, REG_CTRL_REF_CLK_SEL_MASK,
 			   FIELD_PREP(REG_CTRL_REF_CLK_SEL_MASK, 0x2));
@@ -175,23 +174,20 @@ static int phy_meson8b_usb2_power_on(struct phy *phy)
 			   FIELD_PREP(REG_CTRL_FSEL_MASK, 0x5));
 
 	/* reset the PHY */
-	regmap_update_bits(priv->regmap, REG_CTRL, REG_CTRL_POWER_ON_RESET,
-			   REG_CTRL_POWER_ON_RESET);
+	regmap_set_bits(priv->regmap, REG_CTRL, REG_CTRL_POWER_ON_RESET);
 	udelay(RESET_COMPLETE_TIME);
-	regmap_update_bits(priv->regmap, REG_CTRL, REG_CTRL_POWER_ON_RESET, 0);
+	regmap_clear_bits(priv->regmap, REG_CTRL, REG_CTRL_POWER_ON_RESET);
 	udelay(RESET_COMPLETE_TIME);
 
-	regmap_update_bits(priv->regmap, REG_CTRL, REG_CTRL_SOF_TOGGLE_OUT,
-			   REG_CTRL_SOF_TOGGLE_OUT);
+	regmap_set_bits(priv->regmap, REG_CTRL, REG_CTRL_SOF_TOGGLE_OUT);
 
 	if (priv->dr_mode == USB_DR_MODE_HOST) {
-		regmap_update_bits(priv->regmap, REG_DBG_UART,
-				   REG_DBG_UART_SET_IDDQ, 0);
+		regmap_clear_bits(priv->regmap, REG_DBG_UART,
+				  REG_DBG_UART_SET_IDDQ);
 
 		if (priv->match->host_enable_aca) {
-			regmap_update_bits(priv->regmap, REG_ADP_BC,
-					   REG_ADP_BC_ACA_ENABLE,
-					   REG_ADP_BC_ACA_ENABLE);
+			regmap_set_bits(priv->regmap, REG_ADP_BC,
+					REG_ADP_BC_ACA_ENABLE);
 
 			udelay(ACA_ENABLE_COMPLETE_TIME);
 
@@ -214,17 +210,15 @@ static int phy_meson8b_usb2_power_off(struct phy *phy)
 	struct phy_meson8b_usb2_priv *priv = phy_get_drvdata(phy);
 
 	if (priv->dr_mode == USB_DR_MODE_HOST)
-		regmap_update_bits(priv->regmap, REG_DBG_UART,
-				   REG_DBG_UART_SET_IDDQ,
-				   REG_DBG_UART_SET_IDDQ);
+		regmap_set_bits(priv->regmap, REG_DBG_UART,
+				REG_DBG_UART_SET_IDDQ);
 
 	clk_disable_unprepare(priv->clk_usb);
 	clk_disable_unprepare(priv->clk_usb_general);
 	reset_control_rearm(priv->reset);
 
 	/* power off the PHY by putting it into reset mode */
-	regmap_update_bits(priv->regmap, REG_CTRL, REG_CTRL_POWER_ON_RESET,
-			   REG_CTRL_POWER_ON_RESET);
+	regmap_set_bits(priv->regmap, REG_CTRL, REG_CTRL_POWER_ON_RESET);
 
 	return 0;
 }
-- 
2.47.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

  parent reply	other threads:[~2024-12-31 19:20 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-12-31 19:17 [PATCH 0/2] phy: amlogic: meson8b-usb2: two small cleanup patches Martin Blumenstingl
2024-12-31 19:17 ` [PATCH 1/2] phy: amlogic: meson8b-usb2: Use FIELD_PREP instead of _SHIFT macros Martin Blumenstingl
2025-01-02  9:40   ` neil.armstrong
2024-12-31 19:17 ` Martin Blumenstingl [this message]
2025-01-02  9:41   ` [PATCH 2/2] phy: amlogic: meson8b-usb2: Use the regmap_{clear,set}_bits helpers neil.armstrong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20241231191718.2764065-3-martin.blumenstingl@googlemail.com \
    --to=martin.blumenstingl@googlemail.com \
    --cc=kishon@kernel.org \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®