[RFC PATCH v1 2/2] ASoC: dapm: add support for preparing streams

[Martin Blumenstingl <martin.blumenstingl@googlemail.com>]

Codec driver can implement .hw_params and/or .prepare from struct
snd_soc_dai_ops. For codec-to-codec links only the former (.hw_params)
callback has been called.

On platforms like Amlogic Meson8/8b/8m2 the SoC's sound card
(sound/soc/meson/gx-card.c) uses a codec-to-codec link for the HDMI
codec output because further digital routing is required after the
backend. The new DRM HDMI (audio) codec framework (which internally
uses sound/soc/codecs/hdmi-codec.c) relies on the .prepare callback
of the hdmi-codec to be called. Implement a call to
snd_soc_dai_prepare() so the .prepare callback of the hdmi-codec is
called on those platforms.

For platforms or sound cards without a codec-to-codec link with
additional parameters (which applies to most hardware) this changes
nothing as the .prepare callback is already called via
snd_pcm_do_prepare() (as well as dpcm_fe_dai_prepare() and
dpcm_be_dai_prepare()) on those.

Suggested-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 sound/soc/soc-dapm.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index 99521c784a9b..ac8eef217dc4 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -4013,6 +4013,13 @@ static int snd_soc_dai_link_event(struct snd_soc_dapm_widget *w,
 		break;
 
 	case SND_SOC_DAPM_POST_PMU:
+		snd_soc_dapm_widget_for_each_sink_path(w, path) {
+			sink = path->sink->priv;
+
+			snd_soc_dai_prepare(sink, substream);
+			ret = 0;
+		}
+
 		snd_soc_dapm_widget_for_each_sink_path(w, path) {
 			sink = path->sink->priv;
 
-- 
2.47.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic