mirror of https://lore.kernel.org/linux-amlogic/
 help / color / mirror / Atom feed
From: Jayesh Choudhary <j-choudhary@ti.com>
To: <robh@kernel.org>, <krzk+dt@kernel.org>, <conor+dt@kernel.org>,
	<neil.armstrong@linaro.org>, <khilman@baylibre.com>,
	<devicetree@vger.kernel.org>
Cc: <jbrunet@baylibre.com>, <martin.blumenstingl@googlemail.com>,
	<shawnguo@kernel.org>, <s.hauer@pengutronix.de>,
	<kernel@pengutronix.de>, <festevam@gmail.com>,
	<cros-qcom-dts-watchers@chromium.org>, <andersson@kernel.org>,
	<konradybcio@kernel.org>, <geert+renesas@glider.be>,
	<magnus.damm@gmail.com>, <linux-arm-kernel@lists.infradead.org>,
	<linux-amlogic@lists.infradead.org>, <imx@lists.linux.dev>,
	<linux-arm-msm@vger.kernel.org>,
	<linux-renesas-soc@vger.kernel.org>, <dianders@chromium.org>,
	<linux-kernel@vger.kernel.org>, <max.krummenacher@toradex.com>,
	<j-choudhary@ti.com>, <ernestvanhoecke@gmail.com>
Subject: [PATCH] arm64: dts: Add no-hpd property for all ti-sn65dsi86 bridge consumers
Date: Thu, 29 May 2025 16:54:23 +0530	[thread overview]
Message-ID: <20250529112423.484232-1-j-choudhary@ti.com> (raw)

In the SN65DSI86 DSI-2-eDP bridge, HPD is not supported as of now.
But DisplayPort connector_type usecases does need hpd to be enabled.
In order not to break any platform from those driver changes, add
"no-hpd" property to all the existing sn65dsi86 nodes (that don't
have it already) as hpd is not being used there anyways.

Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
---

Upcoming driver changes that will break platforms if we do not have this
property in all the existing sn65dsi86 nodes that assumes hpd is disabled:
<https://lore.kernel.org/all/20250529110418.481756-1-j-choudhary@ti.com/>

(sc7180-trogdor-ti-sn65dsi86.dtsi, sdm850-lenovo-yoga-c630.dts and
sdm845-cheza.dtsi already have this property.)

NOTE: Grouping the logical changes together in a single patch even though
we have multiple vendor dts. I hope that is not an issue.

 .../boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts     | 1 +
 arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts             | 1 +
 arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts                 | 1 +
 arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi             | 1 +
 arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dts            | 1 +
 arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts        | 1 +
 arch/arm64/boot/dts/renesas/white-hawk-cpu-common.dtsi           | 1 +
 7 files changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts
index 0f48c32bec97..6a7d7db3ef8f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts
@@ -292,6 +292,7 @@ edp_bridge: bridge@2c {
 		vpll-supply = <&reg_main_1v8>;
 		vcca-supply = <&reg_main_1v2>;
 		vcc-supply = <&reg_main_1v2>;
+		no-hpd;
 
 		ports {
 			#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts b/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts
index 3ae3824be027..599a53969326 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts
@@ -147,6 +147,7 @@ edp_bridge: bridge@2c {
 		vpll-supply = <&reg_main_1v8>;
 		vcca-supply = <&reg_main_1v2>;
 		vcc-supply = <&reg_main_1v2>;
+		no-hpd;
 
 		ports {
 			#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
index 672ac4c3afa3..8fa18273684f 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
@@ -384,6 +384,7 @@ sn65dsi86_bridge: bridge@2c {
 
 		clocks = <&rpmhcc RPMH_LN_BB_CLK3>;
 		clock-names = "refclk";
+		no-hpd;
 
 		ports {
 			#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi
index 0916fd57d1f1..a115e3fc4cb9 100644
--- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi
@@ -214,6 +214,7 @@ bridge@2c {
 		vpll-supply = <&reg_1p8v>;
 		vcca-supply = <&reg_1p2v>;
 		vcc-supply = <&reg_1p2v>;
+		no-hpd;
 
 		ports {
 			#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dts b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dts
index 6955eafd8d6a..fcc2d8edd464 100644
--- a/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dts
+++ b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dts
@@ -349,6 +349,7 @@ bridge@2c {
 				vpll-supply = <&reg_1p8v>;
 				vcca-supply = <&reg_1p2v>;
 				vcc-supply = <&reg_1p2v>;
+				no-hpd;
 
 				ports {
 					#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts b/arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts
index 4d890e0617af..8b9592b87366 100644
--- a/arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts
+++ b/arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts
@@ -460,6 +460,7 @@ bridge@2c {
 		vpll-supply = <&reg_1p8v>;
 		vcca-supply = <&reg_1p2v>;
 		vcc-supply = <&reg_1p2v>;
+		no-hpd;
 
 		ports {
 			#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/renesas/white-hawk-cpu-common.dtsi b/arch/arm64/boot/dts/renesas/white-hawk-cpu-common.dtsi
index b4024e85ae5a..686a37a8680f 100644
--- a/arch/arm64/boot/dts/renesas/white-hawk-cpu-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/white-hawk-cpu-common.dtsi
@@ -256,6 +256,7 @@ bridge@2c {
 		vpll-supply = <&reg_1p8v>;
 		vcca-supply = <&reg_1p2v>;
 		vcc-supply = <&reg_1p2v>;
+		no-hpd;
 
 		ports {
 			#address-cells = <1>;
-- 
2.34.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

             reply	other threads:[~2025-05-29 12:01 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-05-29 11:24 Jayesh Choudhary [this message]
2025-05-30  7:51 ` Geert Uytterhoeven
2025-06-01 11:11 ` Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250529112423.484232-1-j-choudhary@ti.com \
    --to=j-choudhary@ti.com \
    --cc=andersson@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=cros-qcom-dts-watchers@chromium.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dianders@chromium.org \
    --cc=ernestvanhoecke@gmail.com \
    --cc=festevam@gmail.com \
    --cc=geert+renesas@glider.be \
    --cc=imx@lists.linux.dev \
    --cc=jbrunet@baylibre.com \
    --cc=kernel@pengutronix.de \
    --cc=khilman@baylibre.com \
    --cc=konradybcio@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    --cc=martin.blumenstingl@googlemail.com \
    --cc=max.krummenacher@toradex.com \
    --cc=neil.armstrong@linaro.org \
    --cc=robh@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®