From: Xianwei Zhao via B4 Relay <devnull+xianwei.zhao.amlogic.com@kernel.org>
To: Mark Brown <broonie@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Liang Yang <liang.yang@amlogic.com>,
Feng Chen <feng.chen@amlogic.com>
Cc: linux-spi@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-amlogic@lists.infradead.org,
Xianwei Zhao <xianwei.zhao@amlogic.com>
Subject: [PATCH v2 1/3] spi: dt-bindings: add doc for Amlogic A113L2 SFC
Date: Thu, 21 Aug 2025 13:17:15 +0800 [thread overview]
Message-ID: <20250821-spifc-v2-1-b119f64b5c09@amlogic.com> (raw)
In-Reply-To: <20250821-spifc-v2-0-b119f64b5c09@amlogic.com>
From: Feng Chen <feng.chen@amlogic.com>
Add bindings for Amlogic A113L2 SPI Flash Controller.
Signed-off-by: Feng Chen <feng.chen@amlogic.com>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
---
.../devicetree/bindings/spi/amlogic,a4-spifc.yaml | 82 ++++++++++++++++++++++
1 file changed, 82 insertions(+)
diff --git a/Documentation/devicetree/bindings/spi/amlogic,a4-spifc.yaml b/Documentation/devicetree/bindings/spi/amlogic,a4-spifc.yaml
new file mode 100644
index 000000000000..80a89408a832
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/amlogic,a4-spifc.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2025 Amlogic, Inc. All rights reserved
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/amlogic,a4-spifc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SPI flash controller for Amlogic ARM SoCs
+
+maintainers:
+ - Liang Yang <liang.yang@amlogic.com>
+ - Feng Chen <feng.chen@amlogic.com>
+ - Xianwei Zhao <xianwei.zhao@amlogic.com>
+
+description:
+ The Amlogic SPI flash controller is an extended version of the Amlogic NAND
+ flash controller. It supports SPI Nor Flash and SPI NAND Flash(where the Host
+ ECC HW engine could be enabled).
+
+allOf:
+ - $ref: /schemas/spi/spi-controller.yaml#
+
+properties:
+ compatible:
+ const: amlogic,a4-spifc
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: clock apb gate
+ - description: clock used for the controller
+
+ clock-names:
+ items:
+ - const: gate
+ - const: core
+
+ interrupts:
+ maxItems: 1
+
+ amlogic,rx-adj:
+ description:
+ Adjust sample timing for RX, Sampling time move later by 1 bus clock.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ sfc0: spi@fe08d000 {
+ compatible = "amlogic,a4-spifc";
+ reg = <0xfe08d000 0x800>;
+ clocks = <&clkc_periphs 31>,
+ <&clkc_periphs 102>;
+ clock-names = "gate", "core";
+
+ pinctrl-0 = <&spiflash_default>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ flash@0 {
+ compatible = "spi-nand";
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ nand-ecc-engine = <&sfc0>;
+ nand-ecc-strength = <8>;
+ nand-ecc-step-size = <512>;
+ };
+ };
--
2.37.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2025-08-21 5:25 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-21 5:17 [PATCH v2 0/3] support for Amlogic SPI Flash Controller IP Xianwei Zhao via B4 Relay
2025-08-21 5:17 ` Xianwei Zhao via B4 Relay [this message]
2025-08-21 9:36 ` [PATCH v2 1/3] spi: dt-bindings: add doc for Amlogic A113L2 SFC Xianwei Zhao
2025-08-21 5:17 ` [PATCH v2 2/3] spi: amlogic: add driver for Amlogic SPI Flash Controller Xianwei Zhao via B4 Relay
2025-08-21 5:17 ` [PATCH v2 3/3] MAINTAINERS: Add an entry for Amlogic spifc driver Xianwei Zhao via B4 Relay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250821-spifc-v2-1-b119f64b5c09@amlogic.com \
--to=devnull+xianwei.zhao.amlogic.com@kernel.org \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=feng.chen@amlogic.com \
--cc=krzk+dt@kernel.org \
--cc=liang.yang@amlogic.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=robh@kernel.org \
--cc=xianwei.zhao@amlogic.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®