From: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
To: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
Vinod Koul <vkoul@kernel.org>,
Giuseppe Cavallaro <peppe.cavallaro@st.com>,
Chen-Yu Tsai <wens@kernel.org>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Neil Armstrong <neil.armstrong@linaro.org>,
Kevin Hilman <khilman@baylibre.com>,
Jerome Brunet <jbrunet@baylibre.com>,
Shawn Guo <shawnguo@kernel.org>,
Fabio Estevam <festevam@gmail.com>,
Jan Petrous <jan.petrous@oss.nxp.com>,
s32@nxp.com, Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>,
Romain Gantois <romain.gantois@bootlin.com>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Magnus Damm <magnus.damm@gmail.com>,
Maxime Ripard <mripard@kernel.org>,
Christophe Roullier <christophe.roullier@foss.st.com>,
Bartosz Golaszewski <brgl@kernel.org>,
Radu Rendec <radu@rendec.net>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org,
Drew Fustini <dfustini@tenstorrent.com>,
linux-sunxi@lists.linux.dev, linux-amlogic@lists.infradead.org,
linux-mips@vger.kernel.org, imx@lists.linux.dev,
linux-renesas-soc@vger.kernel.org,
linux-rockchip@lists.infradead.org, sophgo@lists.linux.dev,
linux-riscv@lists.infradead.org, brgl@kernel.org,
Bartosz Golaszewski <bartosz.golaszewski@linaro.org>,
Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>,
stable@vger.kernel.org,
Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Subject: [PATCH net-next v13 00/10] net: stmmac: qcom-ethqos: add support for SCMI power domains
Date: Mon, 13 Jul 2026 15:20:29 +0200 [thread overview]
Message-ID: <20260713-qcom-sa8255p-emac-v13-0-119f8699ef8e@oss.qualcomm.com> (raw)
Add support for the firmware-managed variant of the DesignWare MAC on
the sa8255p platform. This series contains new DT bindings and driver
changes required to support the MAC in the STMMAC driver.
It also reorganizes the ethqos code quite a bit to make the introduction
of power domains into the driver a bit easier on the eye.
The DTS changes will go in separately.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
---
Changes in v13:
- Reapply OPP on speed change in the PHY driver
- Use linux/device-id/of.h instead of mod_devicetable.h
- Fix the "invalid PTP clock rate" warning on sa8255p
- Add commits necessary to allow correct link speed change with SCMI
- Link to v12: https://patch.msgid.link/20260706-qcom-sa8255p-emac-v12-0-e3ab1ecf2901@oss.qualcomm.com
Changes in v12:
- Drop the power-domain-names from the SGMII PHY DT bindings
- Add missing Kconfig dependency on PM for the new SGMII PHY driver
- Link to v11: https://patch.msgid.link/20260629-qcom-sa8255p-emac-v11-0-1b7fb95b51f9@oss.qualcomm.com
Changes in v11:
- Take a new approach: add a dedicated driver for the firmware-managed
SGMII PHY and simplify changes made to the MAC driver
- Link to v10: https://patch.msgid.link/20260323-qcom-sa8255p-emac-v10-0-79302b238a16@oss.qualcomm.com
Changes in v10:
- Fix unit address in DT example
- Link to v9: https://patch.msgid.link/20260316-qcom-sa8255p-emac-v9-0-c58934e76ff2@oss.qualcomm.com
Changes in v9:
- Rebase on top of current linux-next again
- Link to v8: https://patch.msgid.link/20260311-qcom-sa8255p-emac-v8-0-58227bcf1018@oss.qualcomm.com
Changes in v8:
- Rebase on top of recent changes in linux-next which required an
extensive rework
- Drop partial R-b tags
- Link to v7: https://patch.msgid.link/20260306-qcom-sa8255p-emac-v7-0-d6a3013094b7@oss.qualcomm.com
Changes in v7:
- Restored the correct authorship after learning git uses .mailmap for
the --author switch
- Rebased on top of changes from Russell
- Fixed resource management issues in error paths
- Link to v6: https://lore.kernel.org/r/20260112-qcom-sa8255p-emac-v6-0-86a3d4b2ad83@oss.qualcomm.com
Changes in v6:
- Fix $id value in the bindings
- Drop patch 3/8 from the series
- Update init/exit callback signatures
- Link to v5: https://lore.kernel.org/r/20251107-qcom-sa8255p-emac-v5-0-01d3e3aaf388@linaro.org
- Link to v6: https://lore.kernel.org/r/20251219-qcom-sa8255p-emac-v6-0-487f1082461e@oss.qualcomm.com
Changes in v5:
- Name the DT binding document after the new compatbile
- Add missing space
- Make the power-domains limits stricter
- Link to v4: https://lore.kernel.org/r/20251104-qcom-sa8255p-emac-v4-0-f76660087cea@linaro.org
Changes in v4:
- Remove the phys property from the SCMI bindings
- Mark the power-domain-names property as required
- Set maxItems for power-domains to 1 for all existing bindings to
maintain the current requirements after modifying the value in the
top-level document
- Link to v3: https://lore.kernel.org/r/20251027-qcom-sa8255p-emac-v3-0-75767b9230ab@linaro.org
Changes in v3:
- Drop 'power' and 'perf' prefixes from power domain names
- Rebase on top of Russell's changes to dwmac
- Rebase on top of even more changes from Russell that are not yet
in next (E1vB6ld-0000000BIPy-2Qi4@rmk-PC.armlinux.org.uk)
- Link to v2: https://lore.kernel.org/all/20251008-qcom-sa8255p-emac-v2-0-92bc29309fce@linaro.org/
Changes in v2:
- Fix the power-domains property in DT bindings
- Rework the DT bindings example
- Drop the DTS patch, it will go upstream separately
- Link to v1: https://lore.kernel.org/r/20250910-qcom-sa8255p-emac-v1-0-32a79cf1e668@linaro.org
---
Bartosz Golaszewski (10):
net: phy: aquantia: fix system interface type not updated in forced mode
dt-bindings: phy: document the serdes PHY on sa8255p
phy: qcom: add the SGMII SerDes PHY driver for SCMI systems
dt-bindings: net: qcom: document the ethqos device for SCMI-based systems
net: stmmac: qcom-ethqos: set serdes mode before powerup
net: stmmac: qcom-ethqos: update phy_mode to the resolved interface in mac_finish()
net: stmmac: qcom-ethqos: fix SGMII loopback not set on resume after speed change
net: stmmac: qcom-ethqos: reuse the address of ethqos_emac_driver_data
net: stmmac: qcom-ethqos: factor out linux-level setup into a separate function
net: stmmac: qcom-ethqos: add support for sa8255p
.../bindings/net/allwinner,sun7i-a20-gmac.yaml | 3 +
.../bindings/net/altr,socfpga-stmmac.yaml | 3 +
.../bindings/net/amlogic,meson-dwmac.yaml | 3 +
.../devicetree/bindings/net/eswin,eic7700-eth.yaml | 3 +
.../devicetree/bindings/net/intel,dwmac-plat.yaml | 3 +
.../bindings/net/loongson,ls1b-gmac.yaml | 3 +
.../bindings/net/loongson,ls1c-emac.yaml | 3 +
.../devicetree/bindings/net/nxp,dwmac-imx.yaml | 3 +
.../devicetree/bindings/net/nxp,lpc1850-dwmac.yaml | 3 +
.../devicetree/bindings/net/nxp,s32-dwmac.yaml | 3 +
.../devicetree/bindings/net/qcom,ethqos.yaml | 3 +
.../bindings/net/qcom,sa8255p-ethqos.yaml | 107 +++++++++
.../devicetree/bindings/net/renesas,rzn1-gmac.yaml | 3 +
.../bindings/net/renesas,rzv2h-gbeth.yaml | 3 +
.../devicetree/bindings/net/rockchip-dwmac.yaml | 3 +
.../devicetree/bindings/net/snps,dwmac.yaml | 5 +-
.../bindings/net/sophgo,cv1800b-dwmac.yaml | 3 +
.../bindings/net/sophgo,sg2044-dwmac.yaml | 3 +
.../bindings/net/starfive,jh7110-dwmac.yaml | 3 +
.../devicetree/bindings/net/stm32-dwmac.yaml | 3 +
.../devicetree/bindings/net/tesla,fsd-ethqos.yaml | 3 +
.../devicetree/bindings/net/thead,th1520-gmac.yaml | 3 +
.../bindings/net/toshiba,visconti-dwmac.yaml | 3 +
.../bindings/phy/qcom,sa8255p-dwmac-sgmii-phy.yaml | 50 +++++
MAINTAINERS | 1 +
.../ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 246 ++++++++++++++++-----
drivers/net/phy/aquantia/aquantia_main.c | 2 +-
drivers/phy/qualcomm/Kconfig | 11 +
drivers/phy/qualcomm/Makefile | 1 +
drivers/phy/qualcomm/phy-qcom-sgmii-eth-scmi.c | 165 ++++++++++++++
30 files changed, 593 insertions(+), 58 deletions(-)
---
base-commit: 141ee96ad5c69b9d33b2b50ddd49315671023726
change-id: 20250704-qcom-sa8255p-emac-8460235ac512
Best regards,
--
Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next reply other threads:[~2026-07-13 13:21 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-13 13:20 Bartosz Golaszewski [this message]
2026-07-13 13:20 ` [PATCH net-next v13 01/10] net: phy: aquantia: fix system interface type not updated in forced mode Bartosz Golaszewski
2026-07-13 13:20 ` [PATCH net-next v13 02/10] dt-bindings: phy: document the serdes PHY on sa8255p Bartosz Golaszewski
2026-07-13 13:20 ` [PATCH net-next v13 03/10] phy: qcom: add the SGMII SerDes PHY driver for SCMI systems Bartosz Golaszewski
2026-07-14 15:42 ` sashiko-bot
2026-07-13 13:20 ` [PATCH net-next v13 04/10] dt-bindings: net: qcom: document the ethqos device for SCMI-based systems Bartosz Golaszewski
2026-07-14 15:42 ` sashiko-bot
2026-07-13 13:20 ` [PATCH net-next v13 05/10] net: stmmac: qcom-ethqos: set serdes mode before powerup Bartosz Golaszewski
2026-07-13 13:20 ` [PATCH net-next v13 06/10] net: stmmac: qcom-ethqos: update phy_mode to the resolved interface in mac_finish() Bartosz Golaszewski
2026-07-14 15:42 ` sashiko-bot
2026-07-13 13:20 ` [PATCH net-next v13 07/10] net: stmmac: qcom-ethqos: fix SGMII loopback not set on resume after speed change Bartosz Golaszewski
2026-07-13 13:20 ` [PATCH net-next v13 08/10] net: stmmac: qcom-ethqos: reuse the address of ethqos_emac_driver_data Bartosz Golaszewski
2026-07-13 13:20 ` [PATCH net-next v13 09/10] net: stmmac: qcom-ethqos: factor out linux-level setup into a separate function Bartosz Golaszewski
2026-07-13 13:20 ` [PATCH net-next v13 10/10] net: stmmac: qcom-ethqos: add support for sa8255p Bartosz Golaszewski
2026-07-14 15:42 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260713-qcom-sa8255p-emac-v13-0-119f8699ef8e@oss.qualcomm.com \
--to=bartosz.golaszewski@oss.qualcomm.com \
--cc=alexandre.torgue@foss.st.com \
--cc=andersson@kernel.org \
--cc=andrew+netdev@lunn.ch \
--cc=bartosz.golaszewski@linaro.org \
--cc=brgl@kernel.org \
--cc=christophe.roullier@foss.st.com \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=dfustini@tenstorrent.com \
--cc=edumazet@google.com \
--cc=festevam@gmail.com \
--cc=geert+renesas@glider.be \
--cc=imx@lists.linux.dev \
--cc=jan.petrous@oss.nxp.com \
--cc=jbrunet@baylibre.com \
--cc=jernej.skrabec@gmail.com \
--cc=khilman@baylibre.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=krzysztof.kozlowski@oss.qualcomm.com \
--cc=kuba@kernel.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=linux-sunxi@lists.linux.dev \
--cc=magnus.damm@gmail.com \
--cc=martin.blumenstingl@googlemail.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=mohd.anwar@oss.qualcomm.com \
--cc=mripard@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=peppe.cavallaro@st.com \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=radu@rendec.net \
--cc=robh@kernel.org \
--cc=romain.gantois@bootlin.com \
--cc=s32@nxp.com \
--cc=shawnguo@kernel.org \
--cc=sophgo@lists.linux.dev \
--cc=stable@vger.kernel.org \
--cc=vkoul@kernel.org \
--cc=wens@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox