From: sashiko-bot@kernel.org
To: "Niklas Cassel" <cassel@kernel.org>
Cc: linux-pci@vger.kernel.org, neil.armstrong@linaro.org,
linux-amlogic@lists.infradead.org
Subject: Re: [RFC PATCH 1/4] PCI: Update saved Max Payload Size in pcie_set_mps()
Date: Wed, 30 Sep 2026 14:58:33 +0000 [thread overview]
Message-ID: <20260930145834.92A731F000FF@smtp.kernel.org> (raw)
In-Reply-To: <20260930145017.1356088-7-cassel@kernel.org>
> pcie_set_mps() changes the Max Payload Size (MPS) in the Device Control
> register but leaves the copy saved by pci_save_state() alone, so the next
> pci_restore_state() puts back the old value.
>
> The PCI core does change the MPS of devices whose state has already been
> saved: pci_configure_mps() reduces a Root Port's MPS when a device with a
> smaller MPS Supported is hot-added directly below it (commit 9f0e89359775
> ("PCI: Match Root Port's MPS to endpoint's MPSS as necessary")), and with
> "pci=pcie_bus_safe", pcie_bus_configure_settings() can do the same when
> pciehp calls it after a hot-add. The Root Port's state was saved when it
> was added and again when portdrv probed it.
>
> Since commit 3fc686d550f6 ("PCI/ERR: Add support for resetting the Root
> Ports in a platform-specific way"), pcibios_reset_secondary_bus() restores
> that saved state, without saving it first, after host->reset_root_port()
> has reset the Root Port, e.g. during AER recovery or on Link Down with the
> qcom and Rockchip DWC drivers. The Root Port then goes back to the old,
> larger MPS while the device below it is restored to the smaller one, so
> the Root Port may send TLPs that the device treats as Malformed.
>
> Update the saved copy of Device Control when pcie_set_mps() changes the
> MPS, like commit 909f7bf9b080 ("PCI: Update saved_config_space upon
> resource assignment") does for BARs.
>
> Fixes: 3fc686d550f6 ("PCI/ERR: Add support for resetting the Root Ports in a platform-specific way")
> Assisted-by: LLM
> Signed-off-by: Niklas Cassel <cassel@kernel.org>
Sashiko has reviewed this patch and found no issues. It looks great!
--
Sashiko AI review · https://sashiko.dev/#/patchset/20260930145017.1356088-6-cassel@kernel.org?part=1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2026-09-30 14:58 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-30 14:50 [RFC PATCH 0/4] PCI: Fix and improve default MPS configuration Niklas Cassel
2026-09-30 14:50 ` [RFC PATCH 1/4] PCI: Update saved Max Payload Size in pcie_set_mps() Niklas Cassel
2026-09-30 14:58 ` sashiko-bot [this message]
2026-09-30 14:50 ` [RFC PATCH 2/4] PCI: Match the hierarchy's MPS to a device's MPSS as necessary Niklas Cassel
2026-09-30 14:57 ` sashiko-bot
2026-09-30 14:50 ` [RFC PATCH 3/4] PCI: Configure Root Port MPS after scanning its hierarchy Niklas Cassel
2026-09-30 15:06 ` sashiko-bot
2026-09-30 14:50 ` [RFC PATCH 4/4] PCI: meson: Remove redundant MPS configuration Niklas Cassel
2026-09-30 14:57 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260930145834.92A731F000FF@smtp.kernel.org \
--to=sashiko-bot@kernel.org \
--cc=cassel@kernel.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-pci@vger.kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=sashiko-reviews@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®