[PATCH v4 9/9] iio: enable context analysis for all drivers

[Rupesh Majhi <zoone.rupert@gmail.com>]

All of drivers/iio now builds without context analysis warnings, so
enable it in every Makefile that builds objects, replacing the entry
for dps310 alone.

Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Rupesh Majhi <zoone.rupert@gmail.com>
---
Cc: Marco Elver <elver@google.com>
Cc: Bart Van Assche <bvanassche@acm.org>

 drivers/iio/Makefile                        | 2 ++
 drivers/iio/accel/Makefile                  | 2 ++
 drivers/iio/adc/Makefile                    | 2 ++
 drivers/iio/addac/Makefile                  | 2 ++
 drivers/iio/afe/Makefile                    | 2 ++
 drivers/iio/amplifiers/Makefile             | 2 ++
 drivers/iio/buffer/Makefile                 | 2 ++
 drivers/iio/cdc/Makefile                    | 2 ++
 drivers/iio/chemical/Makefile               | 2 ++
 drivers/iio/common/cros_ec_sensors/Makefile | 2 ++
 drivers/iio/common/hid-sensors/Makefile     | 2 ++
 drivers/iio/common/inv_sensors/Makefile     | 2 ++
 drivers/iio/common/ms_sensors/Makefile      | 2 ++
 drivers/iio/common/scmi_sensors/Makefile    | 3 +++
 drivers/iio/common/ssp_sensors/Makefile     | 2 ++
 drivers/iio/common/st_sensors/Makefile      | 2 ++
 drivers/iio/dac/Makefile                    | 2 ++
 drivers/iio/dummy/Makefile                  | 2 ++
 drivers/iio/filter/Makefile                 | 2 ++
 drivers/iio/flow/Makefile                   | 2 ++
 drivers/iio/frequency/Makefile              | 2 ++
 drivers/iio/gyro/Makefile                   | 2 ++
 drivers/iio/health/Makefile                 | 2 ++
 drivers/iio/humidity/Makefile               | 2 ++
 drivers/iio/imu/Makefile                    | 2 ++
 drivers/iio/imu/bmi160/Makefile             | 3 +++
 drivers/iio/imu/bmi270/Makefile             | 3 +++
 drivers/iio/imu/bmi323/Makefile             | 3 +++
 drivers/iio/imu/bno055/Makefile             | 2 ++
 drivers/iio/imu/inv_icm42600/Makefile       | 2 ++
 drivers/iio/imu/inv_icm42607/Makefile       | 2 ++
 drivers/iio/imu/inv_icm45600/Makefile       | 2 ++
 drivers/iio/imu/inv_mpu6050/Makefile        | 2 ++
 drivers/iio/imu/smi330/Makefile             | 3 +++
 drivers/iio/imu/st_lsm6dsx/Makefile         | 3 +++
 drivers/iio/imu/st_lsm9ds0/Makefile         | 3 +++
 drivers/iio/light/Makefile                  | 2 ++
 drivers/iio/magnetometer/Makefile           | 2 ++
 drivers/iio/multiplexer/Makefile            | 2 ++
 drivers/iio/orientation/Makefile            | 2 ++
 drivers/iio/position/Makefile               | 2 ++
 drivers/iio/potentiometer/Makefile          | 2 ++
 drivers/iio/potentiostat/Makefile           | 2 ++
 drivers/iio/pressure/Makefile               | 2 +-
 drivers/iio/proximity/Makefile              | 2 ++
 drivers/iio/resolver/Makefile               | 2 ++
 drivers/iio/sensorhubs/osf/Makefile         | 2 ++
 drivers/iio/temperature/Makefile            | 2 ++
 drivers/iio/test/Makefile                   | 2 ++
 drivers/iio/trigger/Makefile                | 2 ++
 50 files changed, 106 insertions(+), 1 deletion(-)

diff --git a/drivers/iio/Makefile b/drivers/iio/Makefile
index 4e1d930108de..7aead0b09cc6 100644
--- a/drivers/iio/Makefile
+++ b/drivers/iio/Makefile
@@ -3,6 +3,8 @@
 # Makefile for the industrial I/O core.
 #
 
+CONTEXT_ANALYSIS := y
+
 obj-$(CONFIG_IIO) += industrialio.o
 industrialio-y := industrialio-core.o industrialio-event.o inkern.o
 industrialio-$(CONFIG_IIO_BUFFER) += industrialio-buffer.o
diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile
index fa440a859283..ec75ab67bd45 100644
--- a/drivers/iio/accel/Makefile
+++ b/drivers/iio/accel/Makefile
@@ -3,6 +3,8 @@
 # Makefile for industrial I/O accelerometer drivers
 #
 
+CONTEXT_ANALYSIS := y
+
 # When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_ADIS16201) += adis16201.o
 obj-$(CONFIG_ADIS16209) += adis16209.o
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index d7bb4815df61..15ac57dc2054 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -3,6 +3,8 @@
 # Makefile for IIO ADC drivers
 #
 
+CONTEXT_ANALYSIS := y
+
 obj-$(CONFIG_IIO_ADC_HELPER) += industrialio-adc.o
 
 # When adding new entries keep the list in alphabetical order
diff --git a/drivers/iio/addac/Makefile b/drivers/iio/addac/Makefile
index 577777276e43..ca0c5d341627 100644
--- a/drivers/iio/addac/Makefile
+++ b/drivers/iio/addac/Makefile
@@ -3,6 +3,8 @@
 # Makefile for industrial I/O ADDAC drivers
 #
 
+CONTEXT_ANALYSIS := y
+
 # When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_AD74115) += ad74115.o
 obj-$(CONFIG_AD74413R) += ad74413r.o
diff --git a/drivers/iio/afe/Makefile b/drivers/iio/afe/Makefile
index 4c56c8edb2ba..453f1fc7f647 100644
--- a/drivers/iio/afe/Makefile
+++ b/drivers/iio/afe/Makefile
@@ -3,5 +3,7 @@
 # Makefile for industrial I/O Analog Front Ends (AFE)
 #
 
+CONTEXT_ANALYSIS := y
+
 # When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_IIO_RESCALE) += iio-rescale.o
diff --git a/drivers/iio/amplifiers/Makefile b/drivers/iio/amplifiers/Makefile
index 0a76443be1aa..d7c5036ba2df 100644
--- a/drivers/iio/amplifiers/Makefile
+++ b/drivers/iio/amplifiers/Makefile
@@ -3,6 +3,8 @@
 # Makefile iio/amplifiers
 #
 
+CONTEXT_ANALYSIS := y
+
 # When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_AD8366) += ad8366.o
 obj-$(CONFIG_ADA4250) += ada4250.o
diff --git a/drivers/iio/buffer/Makefile b/drivers/iio/buffer/Makefile
index 1403eb2f9409..bb068efa4c9d 100644
--- a/drivers/iio/buffer/Makefile
+++ b/drivers/iio/buffer/Makefile
@@ -3,6 +3,8 @@
 # Makefile for the industrial I/O buffer implementations
 #
 
+CONTEXT_ANALYSIS := y
+
 # When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_IIO_BUFFER_CB) += industrialio-buffer-cb.o
 obj-$(CONFIG_IIO_BUFFER_DMA) += industrialio-buffer-dma.o
diff --git a/drivers/iio/cdc/Makefile b/drivers/iio/cdc/Makefile
index 41db756d8020..241263f7b512 100644
--- a/drivers/iio/cdc/Makefile
+++ b/drivers/iio/cdc/Makefile
@@ -3,5 +3,7 @@
 # Makefile for industrial I/O capacitance to digital converter (CDC) drivers
 #
 
+CONTEXT_ANALYSIS := y
+
 obj-$(CONFIG_AD7150) += ad7150.o
 obj-$(CONFIG_AD7746) += ad7746.o
diff --git a/drivers/iio/chemical/Makefile b/drivers/iio/chemical/Makefile
index 2287a00a6b75..0cffbad02234 100644
--- a/drivers/iio/chemical/Makefile
+++ b/drivers/iio/chemical/Makefile
@@ -3,6 +3,8 @@
 # Makefile for IIO chemical sensors
 #
 
+CONTEXT_ANALYSIS := y
+
 # When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_AOSONG_AGS02MA)	+= ags02ma.o
 obj-$(CONFIG_ATLAS_PH_SENSOR)	+= atlas-sensor.o
diff --git a/drivers/iio/common/cros_ec_sensors/Makefile b/drivers/iio/common/cros_ec_sensors/Makefile
index a7dfb5794cae..5c41c7e52d0c 100644
--- a/drivers/iio/common/cros_ec_sensors/Makefile
+++ b/drivers/iio/common/cros_ec_sensors/Makefile
@@ -3,6 +3,8 @@
 # Makefile for sensors seen through the ChromeOS EC sensor hub.
 #
 
+CONTEXT_ANALYSIS := y
+
 cros-ec-sensors-core-objs += cros_ec_sensors_core.o cros_ec_sensors_trace.o
 obj-$(CONFIG_IIO_CROS_EC_SENSORS_CORE) += cros-ec-sensors-core.o
 obj-$(CONFIG_IIO_CROS_EC_SENSORS) += cros_ec_sensors.o
diff --git a/drivers/iio/common/hid-sensors/Makefile b/drivers/iio/common/hid-sensors/Makefile
index 64b01a81fcb2..b90bcf40066a 100644
--- a/drivers/iio/common/hid-sensors/Makefile
+++ b/drivers/iio/common/hid-sensors/Makefile
@@ -3,6 +3,8 @@
 # Makefile for the Hid sensor common modules.
 #
 
+CONTEXT_ANALYSIS := y
+
 obj-$(CONFIG_HID_SENSOR_IIO_COMMON) += hid-sensor-iio-common.o
 obj-$(CONFIG_HID_SENSOR_IIO_TRIGGER) += hid-sensor-trigger.o
 hid-sensor-iio-common-y := hid-sensor-attributes.o
diff --git a/drivers/iio/common/inv_sensors/Makefile b/drivers/iio/common/inv_sensors/Makefile
index dcf39f249112..a464dad84d68 100644
--- a/drivers/iio/common/inv_sensors/Makefile
+++ b/drivers/iio/common/inv_sensors/Makefile
@@ -3,4 +3,6 @@
 # Makefile for TDK-InvenSense sensors module.
 #
 
+CONTEXT_ANALYSIS := y
+
 obj-$(CONFIG_IIO_INV_SENSORS_TIMESTAMP) += inv_sensors_timestamp.o
diff --git a/drivers/iio/common/ms_sensors/Makefile b/drivers/iio/common/ms_sensors/Makefile
index 028573b9b7e3..8f9b9a4556e8 100644
--- a/drivers/iio/common/ms_sensors/Makefile
+++ b/drivers/iio/common/ms_sensors/Makefile
@@ -3,4 +3,6 @@
 # Makefile for the Measurement Specialties sensor common modules.
 #
 
+CONTEXT_ANALYSIS := y
+
 obj-$(CONFIG_IIO_MS_SENSORS_I2C) += ms_sensors_i2c.o
diff --git a/drivers/iio/common/scmi_sensors/Makefile b/drivers/iio/common/scmi_sensors/Makefile
index 645e0fce1a73..4c1421003d2d 100644
--- a/drivers/iio/common/scmi_sensors/Makefile
+++ b/drivers/iio/common/scmi_sensors/Makefile
@@ -2,4 +2,7 @@
 #
 # Makefile for the IIO over SCMI
 #
+
+CONTEXT_ANALYSIS := y
+
 obj-$(CONFIG_IIO_SCMI) += scmi_iio.o
diff --git a/drivers/iio/common/ssp_sensors/Makefile b/drivers/iio/common/ssp_sensors/Makefile
index ba831429b20a..caee484a0a23 100644
--- a/drivers/iio/common/ssp_sensors/Makefile
+++ b/drivers/iio/common/ssp_sensors/Makefile
@@ -3,6 +3,8 @@
 # Makefile for SSP sensor drivers and commons.
 #
 
+CONTEXT_ANALYSIS := y
+
 sensorhub-objs				:= ssp_dev.o ssp_spi.o
 obj-$(CONFIG_IIO_SSP_SENSORHUB)		+= sensorhub.o
 
diff --git a/drivers/iio/common/st_sensors/Makefile b/drivers/iio/common/st_sensors/Makefile
index f7fb3b79b64c..089f6aca57b7 100644
--- a/drivers/iio/common/st_sensors/Makefile
+++ b/drivers/iio/common/st_sensors/Makefile
@@ -3,6 +3,8 @@
 # Makefile for the STMicroelectronics sensor common modules.
 #
 
+CONTEXT_ANALYSIS := y
+
 obj-$(CONFIG_IIO_ST_SENSORS_I2C) += st_sensors_i2c.o
 obj-$(CONFIG_IIO_ST_SENSORS_SPI) += st_sensors_spi.o
 obj-$(CONFIG_IIO_ST_SENSORS_CORE) += st_sensors.o
diff --git a/drivers/iio/dac/Makefile b/drivers/iio/dac/Makefile
index 2cd0fe23db9e..72da690354e5 100644
--- a/drivers/iio/dac/Makefile
+++ b/drivers/iio/dac/Makefile
@@ -3,6 +3,8 @@
 # Makefile for industrial I/O DAC drivers
 #
 
+CONTEXT_ANALYSIS := y
+
 # When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_AD3530R) += ad3530r.o
 obj-$(CONFIG_AD3552R_HS) += ad3552r-hs.o
diff --git a/drivers/iio/dummy/Makefile b/drivers/iio/dummy/Makefile
index f14fe20f365c..aa3949ec2619 100644
--- a/drivers/iio/dummy/Makefile
+++ b/drivers/iio/dummy/Makefile
@@ -3,6 +3,8 @@
 # Makefile for the IIO Dummy Driver
 #
 
+CONTEXT_ANALYSIS := y
+
 obj-$(CONFIG_IIO_SIMPLE_DUMMY) += iio_dummy.o
 iio_dummy-y := iio_simple_dummy.o
 iio_dummy-$(CONFIG_IIO_SIMPLE_DUMMY_EVENTS) += iio_simple_dummy_events.o
diff --git a/drivers/iio/filter/Makefile b/drivers/iio/filter/Makefile
index 55e228c0dd20..ec416d647755 100644
--- a/drivers/iio/filter/Makefile
+++ b/drivers/iio/filter/Makefile
@@ -3,5 +3,7 @@
 # Makefile for industrial I/O Filter drivers
 #
 
+CONTEXT_ANALYSIS := y
+
 # When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_ADMV8818) += admv8818.o
diff --git a/drivers/iio/flow/Makefile b/drivers/iio/flow/Makefile
index 3cf4ab95c69c..ce5e1df630a9 100644
--- a/drivers/iio/flow/Makefile
+++ b/drivers/iio/flow/Makefile
@@ -3,5 +3,7 @@
 # Makefile for industrial I/O flow sensor drivers
 #
 
+CONTEXT_ANALYSIS := y
+
 # When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_SENSIRION_SLF3S) += slf3s.o
diff --git a/drivers/iio/frequency/Makefile b/drivers/iio/frequency/Makefile
index e3b1d36ed620..5f9900a4ebf3 100644
--- a/drivers/iio/frequency/Makefile
+++ b/drivers/iio/frequency/Makefile
@@ -3,6 +3,8 @@
 # Makefile iio/frequency
 #
 
+CONTEXT_ANALYSIS := y
+
 # When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_AD9523) += ad9523.o
 obj-$(CONFIG_AD9910) += ad9910.o
diff --git a/drivers/iio/gyro/Makefile b/drivers/iio/gyro/Makefile
index 0319b397dc3f..1c2a020ffe6e 100644
--- a/drivers/iio/gyro/Makefile
+++ b/drivers/iio/gyro/Makefile
@@ -3,6 +3,8 @@
 # Makefile for industrial I/O gyroscope sensor drivers
 #
 
+CONTEXT_ANALYSIS := y
+
 # When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_ADIS16080) += adis16080.o
 obj-$(CONFIG_ADIS16130) += adis16130.o
diff --git a/drivers/iio/health/Makefile b/drivers/iio/health/Makefile
index 910817112258..9100aa431585 100644
--- a/drivers/iio/health/Makefile
+++ b/drivers/iio/health/Makefile
@@ -3,6 +3,8 @@
 # Makefile for IIO Health sensors
 #
 
+CONTEXT_ANALYSIS := y
+
 # When adding new entries keep the list in alphabetical order
 
 obj-$(CONFIG_AFE4403)		+= afe4403.o
diff --git a/drivers/iio/humidity/Makefile b/drivers/iio/humidity/Makefile
index 34b3dc749466..1d736b306a8d 100644
--- a/drivers/iio/humidity/Makefile
+++ b/drivers/iio/humidity/Makefile
@@ -3,6 +3,8 @@
 # Makefile for IIO humidity sensor drivers
 #
 
+CONTEXT_ANALYSIS := y
+
 obj-$(CONFIG_AM2315) += am2315.o
 obj-$(CONFIG_DHT11) += dht11.o
 obj-$(CONFIG_ENS210) += ens210.o
diff --git a/drivers/iio/imu/Makefile b/drivers/iio/imu/Makefile
index 3268dc2371ae..10383f75d288 100644
--- a/drivers/iio/imu/Makefile
+++ b/drivers/iio/imu/Makefile
@@ -3,6 +3,8 @@
 # Makefile for Inertial Measurement Units
 #
 
+CONTEXT_ANALYSIS := y
+
 # When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_ADIS16400) += adis16400.o
 obj-$(CONFIG_ADIS16460) += adis16460.o
diff --git a/drivers/iio/imu/bmi160/Makefile b/drivers/iio/imu/bmi160/Makefile
index fdcfeddf48d4..72ebe0409d92 100644
--- a/drivers/iio/imu/bmi160/Makefile
+++ b/drivers/iio/imu/bmi160/Makefile
@@ -2,6 +2,9 @@
 #
 # Makefile for Bosch BMI160 IMU
 #
+
+CONTEXT_ANALYSIS := y
+
 obj-$(CONFIG_BMI160) += bmi160_core.o
 obj-$(CONFIG_BMI160_I2C) += bmi160_i2c.o
 obj-$(CONFIG_BMI160_SPI) += bmi160_spi.o
diff --git a/drivers/iio/imu/bmi270/Makefile b/drivers/iio/imu/bmi270/Makefile
index d96c96fc3d83..1dc327c96f8f 100644
--- a/drivers/iio/imu/bmi270/Makefile
+++ b/drivers/iio/imu/bmi270/Makefile
@@ -2,6 +2,9 @@
 #
 # Makefile for Bosch BMI270 IMU
 #
+
+CONTEXT_ANALYSIS := y
+
 obj-$(CONFIG_BMI270) += bmi270_core.o
 obj-$(CONFIG_BMI270_I2C) += bmi270_i2c.o
 obj-$(CONFIG_BMI270_SPI) += bmi270_spi.o
diff --git a/drivers/iio/imu/bmi323/Makefile b/drivers/iio/imu/bmi323/Makefile
index a6a6dc0207c9..ef8fc4f8460c 100644
--- a/drivers/iio/imu/bmi323/Makefile
+++ b/drivers/iio/imu/bmi323/Makefile
@@ -2,6 +2,9 @@
 #
 # Makefile for Bosch BMI323 IMU
 #
+
+CONTEXT_ANALYSIS := y
+
 obj-$(CONFIG_BMI323) += bmi323_core.o
 obj-$(CONFIG_BMI323_I2C) += bmi323_i2c.o
 obj-$(CONFIG_BMI323_SPI) += bmi323_spi.o
diff --git a/drivers/iio/imu/bno055/Makefile b/drivers/iio/imu/bno055/Makefile
index 98c624730dae..8ecf24be7954 100644
--- a/drivers/iio/imu/bno055/Makefile
+++ b/drivers/iio/imu/bno055/Makefile
@@ -1,5 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 
+CONTEXT_ANALYSIS := y
+
 obj-$(CONFIG_BOSCH_BNO055) += bno055.o
 obj-$(CONFIG_BOSCH_BNO055_SERIAL) += bno055_ser.o
 bno055_ser-y := bno055_ser_core.o
diff --git a/drivers/iio/imu/inv_icm42600/Makefile b/drivers/iio/imu/inv_icm42600/Makefile
index 0f49f6df3647..9b6ddbce713d 100644
--- a/drivers/iio/imu/inv_icm42600/Makefile
+++ b/drivers/iio/imu/inv_icm42600/Makefile
@@ -1,5 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-or-later
 
+CONTEXT_ANALYSIS := y
+
 obj-$(CONFIG_INV_ICM42600) += inv-icm42600.o
 inv-icm42600-y += inv_icm42600_core.o
 inv-icm42600-y += inv_icm42600_gyro.o
diff --git a/drivers/iio/imu/inv_icm42607/Makefile b/drivers/iio/imu/inv_icm42607/Makefile
index 7b907e019601..4f19ebe08f88 100644
--- a/drivers/iio/imu/inv_icm42607/Makefile
+++ b/drivers/iio/imu/inv_icm42607/Makefile
@@ -1,5 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-or-later
 
+CONTEXT_ANALYSIS := y
+
 obj-$(CONFIG_INV_ICM42607) += inv-icm42607.o
 inv-icm42607-y += inv_icm42607_core.o
 inv-icm42607-y += inv_icm42607_gyro.o
diff --git a/drivers/iio/imu/inv_icm45600/Makefile b/drivers/iio/imu/inv_icm45600/Makefile
index c98b8365b467..b5aaa00ba3b3 100644
--- a/drivers/iio/imu/inv_icm45600/Makefile
+++ b/drivers/iio/imu/inv_icm45600/Makefile
@@ -1,5 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-or-later
 
+CONTEXT_ANALYSIS := y
+
 obj-$(CONFIG_INV_ICM45600) += inv-icm45600.o
 inv-icm45600-y += inv_icm45600_core.o
 inv-icm45600-y += inv_icm45600_buffer.o
diff --git a/drivers/iio/imu/inv_mpu6050/Makefile b/drivers/iio/imu/inv_mpu6050/Makefile
index c103441a906b..7c89414e1452 100644
--- a/drivers/iio/imu/inv_mpu6050/Makefile
+++ b/drivers/iio/imu/inv_mpu6050/Makefile
@@ -3,6 +3,8 @@
 # Makefile for Invensense MPU6050 device.
 #
 
+CONTEXT_ANALYSIS := y
+
 obj-$(CONFIG_INV_MPU6050_IIO) += inv-mpu6050.o
 inv-mpu6050-y := inv_mpu_core.o inv_mpu_ring.o inv_mpu_trigger.o \
 		 inv_mpu_aux.o inv_mpu_magn.o
diff --git a/drivers/iio/imu/smi330/Makefile b/drivers/iio/imu/smi330/Makefile
index c663dcb5a9f2..90e0977133e9 100644
--- a/drivers/iio/imu/smi330/Makefile
+++ b/drivers/iio/imu/smi330/Makefile
@@ -2,6 +2,9 @@
 #
 # Makefile for Bosch SMI330 IMU
 #
+
+CONTEXT_ANALYSIS := y
+
 obj-$(CONFIG_SMI330) += smi330_core.o
 obj-$(CONFIG_SMI330_I2C) += smi330_i2c.o
 obj-$(CONFIG_SMI330_SPI) += smi330_spi.o
diff --git a/drivers/iio/imu/st_lsm6dsx/Makefile b/drivers/iio/imu/st_lsm6dsx/Makefile
index 19a488254de3..11b8ab9adac2 100644
--- a/drivers/iio/imu/st_lsm6dsx/Makefile
+++ b/drivers/iio/imu/st_lsm6dsx/Makefile
@@ -1,4 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
+
+CONTEXT_ANALYSIS := y
+
 st_lsm6dsx-y := st_lsm6dsx_core.o st_lsm6dsx_buffer.o \
 		st_lsm6dsx_shub.o st_lsm6dsx_fusion.o
 
diff --git a/drivers/iio/imu/st_lsm9ds0/Makefile b/drivers/iio/imu/st_lsm9ds0/Makefile
index 488af523f648..6326718f7e25 100644
--- a/drivers/iio/imu/st_lsm9ds0/Makefile
+++ b/drivers/iio/imu/st_lsm9ds0/Makefile
@@ -1,4 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
+
+CONTEXT_ANALYSIS := y
+
 obj-$(CONFIG_IIO_ST_LSM9DS0) += st_lsm9ds0.o
 st_lsm9ds0-y := st_lsm9ds0_core.o
 obj-$(CONFIG_IIO_ST_LSM9DS0_I2C) += st_lsm9ds0_i2c.o
diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
index 6672ed01a819..5db5ab99f63f 100644
--- a/drivers/iio/light/Makefile
+++ b/drivers/iio/light/Makefile
@@ -3,6 +3,8 @@
 # Makefile for IIO Light sensors
 #
 
+CONTEXT_ANALYSIS := y
+
 # When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_ACPI_ALS)		+= acpi-als.o
 obj-$(CONFIG_ADJD_S311)		+= adjd_s311.o
diff --git a/drivers/iio/magnetometer/Makefile b/drivers/iio/magnetometer/Makefile
index 8f2205975c1b..b85de8718ce4 100644
--- a/drivers/iio/magnetometer/Makefile
+++ b/drivers/iio/magnetometer/Makefile
@@ -3,6 +3,8 @@
 # Makefile for industrial I/O Magnetometer sensor drivers
 #
 
+CONTEXT_ANALYSIS := y
+
 # When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_AF8133J)	+= af8133j.o
 obj-$(CONFIG_AK8974)	+= ak8974.o
diff --git a/drivers/iio/multiplexer/Makefile b/drivers/iio/multiplexer/Makefile
index f069ab781d95..7a2261b2f8b1 100644
--- a/drivers/iio/multiplexer/Makefile
+++ b/drivers/iio/multiplexer/Makefile
@@ -3,5 +3,7 @@
 # Makefile for industrial I/O multiplexer drivers
 #
 
+CONTEXT_ANALYSIS := y
+
 # When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_IIO_MUX) += iio-mux.o
diff --git a/drivers/iio/orientation/Makefile b/drivers/iio/orientation/Makefile
index 7800ed293a9a..3bfa01d483da 100644
--- a/drivers/iio/orientation/Makefile
+++ b/drivers/iio/orientation/Makefile
@@ -3,6 +3,8 @@
 # Makefile for industrial I/O Inclinometer sensor drivers
 #
 
+CONTEXT_ANALYSIS := y
+
 # When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_HID_SENSOR_INCLINOMETER_3D) += hid-sensor-incl-3d.o
 obj-$(CONFIG_HID_SENSOR_DEVICE_ROTATION) += hid-sensor-rotation.o
diff --git a/drivers/iio/position/Makefile b/drivers/iio/position/Makefile
index d70902f2979d..0b61f33bbee8 100644
--- a/drivers/iio/position/Makefile
+++ b/drivers/iio/position/Makefile
@@ -2,6 +2,8 @@
 # Makefile for IIO linear and angular position sensors
 #
 
+CONTEXT_ANALYSIS := y
+
 # When adding new entries keep the list in alphabetical order
 
 obj-$(CONFIG_HID_SENSOR_CUSTOM_INTEL_HINGE) += hid-sensor-custom-intel-hinge.o
diff --git a/drivers/iio/potentiometer/Makefile b/drivers/iio/potentiometer/Makefile
index d11fb739176c..5cf55d9501c0 100644
--- a/drivers/iio/potentiometer/Makefile
+++ b/drivers/iio/potentiometer/Makefile
@@ -3,6 +3,8 @@
 # Makefile for industrial I/O potentiometer drivers
 #
 
+CONTEXT_ANALYSIS := y
+
 # When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_AD5110) += ad5110.o
 obj-$(CONFIG_AD5272) += ad5272.o
diff --git a/drivers/iio/potentiostat/Makefile b/drivers/iio/potentiostat/Makefile
index be78b46acbab..a3e5d78cf809 100644
--- a/drivers/iio/potentiostat/Makefile
+++ b/drivers/iio/potentiostat/Makefile
@@ -3,5 +3,7 @@
 # Makefile for industrial I/O potentiostat drivers
 #
 
+CONTEXT_ANALYSIS := y
+
 # When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_LMP91000) += lmp91000.o
diff --git a/drivers/iio/pressure/Makefile b/drivers/iio/pressure/Makefile
index a3b57bdd5b3e..861f5622a44f 100644
--- a/drivers/iio/pressure/Makefile
+++ b/drivers/iio/pressure/Makefile
@@ -3,7 +3,7 @@
 # Makefile for industrial I/O pressure drivers
 #
 
-CONTEXT_ANALYSIS_dps310.o := y
+CONTEXT_ANALYSIS := y
 
 # When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_ABP060MG) += abp060mg.o
diff --git a/drivers/iio/proximity/Makefile b/drivers/iio/proximity/Makefile
index 8a65e42fbea0..88b19778252b 100644
--- a/drivers/iio/proximity/Makefile
+++ b/drivers/iio/proximity/Makefile
@@ -3,6 +3,8 @@
 # Makefile for IIO proximity sensors
 #
 
+CONTEXT_ANALYSIS := y
+
 # When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_AS3935)		+= as3935.o
 obj-$(CONFIG_CROS_EC_MKBP_PROXIMITY) += cros_ec_mkbp_proximity.o
diff --git a/drivers/iio/resolver/Makefile b/drivers/iio/resolver/Makefile
index 7f6c876c35ae..28aeef65fb6d 100644
--- a/drivers/iio/resolver/Makefile
+++ b/drivers/iio/resolver/Makefile
@@ -3,6 +3,8 @@
 # Makefile for Resolver/Synchro drivers
 #
 
+CONTEXT_ANALYSIS := y
+
 obj-$(CONFIG_AD2S90) += ad2s90.o
 obj-$(CONFIG_AD2S1200) += ad2s1200.o
 obj-$(CONFIG_AD2S1210) += ad2s1210.o
diff --git a/drivers/iio/sensorhubs/osf/Makefile b/drivers/iio/sensorhubs/osf/Makefile
index b4e03b80cfa4..da98e9b27577 100644
--- a/drivers/iio/sensorhubs/osf/Makefile
+++ b/drivers/iio/sensorhubs/osf/Makefile
@@ -1,5 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
 
+CONTEXT_ANALYSIS := y
+
 obj-$(CONFIG_OPEN_SENSOR_FUSION) += open-sensor-fusion.o
 
 open-sensor-fusion-y := osf_core.o osf_iio.o osf_protocol.o osf_serdev.o \
diff --git a/drivers/iio/temperature/Makefile b/drivers/iio/temperature/Makefile
index 0850bf691820..69a084f0a18a 100644
--- a/drivers/iio/temperature/Makefile
+++ b/drivers/iio/temperature/Makefile
@@ -3,6 +3,8 @@
 # Makefile for industrial I/O temperature drivers
 #
 
+CONTEXT_ANALYSIS := y
+
 obj-$(CONFIG_IQS620AT_TEMP) += iqs620at-temp.o
 obj-$(CONFIG_LTC2983) += ltc2983.o
 obj-$(CONFIG_HID_SENSOR_TEMP) += hid-sensor-temperature.o
diff --git a/drivers/iio/test/Makefile b/drivers/iio/test/Makefile
index ba08afa7f3f2..a7222f878a94 100644
--- a/drivers/iio/test/Makefile
+++ b/drivers/iio/test/Makefile
@@ -3,6 +3,8 @@
 # Makefile for the industrial I/O unit tests.
 #
 
+CONTEXT_ANALYSIS := y
+
 # Keep in alphabetical order
 obj-$(CONFIG_IIO_CHANNEL_PREFIX_KUNIT_TEST) += iio-test-channel-prefix.o
 obj-$(CONFIG_IIO_RESCALE_KUNIT_TEST) += iio-test-rescale.o
diff --git a/drivers/iio/trigger/Makefile b/drivers/iio/trigger/Makefile
index fc1fd5661c94..6eb16f37df15 100644
--- a/drivers/iio/trigger/Makefile
+++ b/drivers/iio/trigger/Makefile
@@ -3,6 +3,8 @@
 # Makefile for triggers not associated with iio-devices
 #
 
+CONTEXT_ANALYSIS := y
+
 # When adding new entries keep the list in alphabetical order
 
 obj-$(CONFIG_IIO_HRTIMER_TRIGGER) += iio-trig-hrtimer.o
-- 
2.43.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic