[PATCH RFC RFT v2 0/3] clk: meson: Refactor PLL pre-divider as a divider clock

[Jian Hu via B4 Relay <devnull+jian.hu.amlogic.com@kernel.org>]

This series refactors the Meson PLL framework to remove the dedicated
PLL pre-divider (N) parameter from the PLL implementation and model it
as a separate divider clock.

Currently, the Meson PLL framework models the PLL pre-divider using a
dedicated n field in struct meson_clk_pll_data. This makes the
pre-divider part of the PLL-specific implementation, although the
Common Clock Framework already provides a generic divider clock.

The pre-divider is not intended to be dynamically adjusted. Each PLL
has a fixed N value as part of its configuration. Most PLLs use N = 1,
while a few special cases use N = 3 to satisfy their PLL input frequency
constraints. Modeling the pre-divider as a separate divider clock
removes PLL-specific handling and simplifies the PLL framework.

The series updates the Amlogic SoC clock drivers to use standalone
pre-divider clocks, with the PLL DCO taking the pre-divider clock as
its parent instead of the input clock directly. It also adds the
required clock IDs.

Some Amlogic PLL pre-dividers read as zero after reset, which
does not produce a usable clock. The existing divider implementation
reports the parent rate for a zero divisor, potentially hiding this
invalid state. In addition, when the requested pre-divider rate equals
the parent rate, the divider must be configured with a divisor of 1.
The zero value read from the register after reset must not prevent the
divider from being configured correctly.

To address these issues, the series introduces
CLK_DIVIDER_INVALID_ZERO, allowing dividers with an invalid zero
value to report a rate of zero instead of incorrectly reporting the
parent rate.

Signed-off-by: Jian Hu <jian.hu@amlogic.com>
---
Changes in v2:
- Add CLK_DIVIDER_INVALID_ZERO.
- Add all SoCs prediv clock index.
- Support table for pll m.
- Fix the `determine` logic: when `best_parent_rate` equals 0,
  recalculate a new `parent_rate`.
- Add all SoCs pll prediv clocks.
- Link to v1: https://lore.kernel.org/r/20260923-meson_refactor_n-v1-0-3a8ce27121a2@amlogic.com

---
Jian Hu (3):
      dt-bindings: clock: amlogic: Add PLL pre-divider clock IDs
      clk: divider: add CLK_DIVIDER_INVALID_ZERO flag
      clk: meson: pll: Remove the dedicated n parameter

 drivers/clk/clk-divider.c                       |   3 +
 drivers/clk/meson/a1-pll.c                      |  69 ++++--
 drivers/clk/meson/axg.c                         | 230 ++++++++++++------
 drivers/clk/meson/c3-pll.c                      |  99 ++++++--
 drivers/clk/meson/clk-pll.c                     | 203 ++++++----------
 drivers/clk/meson/clk-pll.h                     |  17 +-
 drivers/clk/meson/clk-regmap.h                  |   2 +-
 drivers/clk/meson/g12a.c                        | 265 ++++++++++++++++-----
 drivers/clk/meson/gxbb.c                        | 304 ++++++++++++++++--------
 drivers/clk/meson/meson8-ddr.c                  |  39 ++-
 drivers/clk/meson/meson8b.c                     | 238 +++++++++++++------
 drivers/clk/meson/s4-pll.c                      | 128 +++++++---
 drivers/clk/meson/t7-pll.c                      | 186 +++++++++++----
 include/dt-bindings/clock/amlogic,a1-pll-clkc.h |   3 +
 include/dt-bindings/clock/amlogic,c3-pll-clkc.h |   3 +
 include/dt-bindings/clock/amlogic,s4-pll-clkc.h |   4 +
 include/dt-bindings/clock/amlogic,t7-pll-clkc.h |   6 +
 include/dt-bindings/clock/axg-clkc.h            |   5 +
 include/dt-bindings/clock/g12a-clkc.h           |   8 +
 include/dt-bindings/clock/gxbb-clkc.h           |   4 +
 include/dt-bindings/clock/meson8-ddr-clkc.h     |   1 +
 include/dt-bindings/clock/meson8b-clkc.h        |   4 +
 include/linux/clk-provider.h                    |   6 +
 23 files changed, 1271 insertions(+), 556 deletions(-)
---
base-commit: 43e1705ecab981c66baee89041e6f728c0436f19
change-id: 20260923-meson_refactor_n-e7f25904e536

Best regards,
-- 
Jian Hu <jian.hu@amlogic.com>



_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic