From: Xianwei Zhao <xianwei.zhao@amlogic.com>
To: Conor Dooley <conor@kernel.org>
Cc: Mark Brown <broonie@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Liang Yang <liang.yang@amlogic.com>,
Feng Chen <feng.chen@amlogic.com>,
linux-spi@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-amlogic@lists.infradead.org
Subject: Re: [PATCH v3 1/3] spi: dt-bindings: add Amlogic A113L2 SFC
Date: Wed, 27 Aug 2025 10:14:30 +0800 [thread overview]
Message-ID: <220e4324-ac16-40be-8793-48c0b3e2ca0e@amlogic.com> (raw)
In-Reply-To: <20250826-scratch-cleft-a3f7b36a3cb5@spud>
Hi Conor,
Thanks for your reply.
On 2025/8/27 01:51, Conor Dooley wrote:
> Subject:
> Re: [PATCH v3 1/3] spi: dt-bindings: add Amlogic A113L2 SFC
> From:
> Conor Dooley <conor@kernel.org>
> Date:
> 2025/8/27 01:51
>
> To:
> xianwei.zhao@amlogic.com
> CC:
> Mark Brown <broonie@kernel.org>, Rob Herring <robh@kernel.org>,
> Krzysztof Kozlowski <krzk+dt@kernel.org>, Conor Dooley
> <conor+dt@kernel.org>, Liang Yang <liang.yang@amlogic.com>, Feng Chen
> <feng.chen@amlogic.com>, linux-spi@vger.kernel.org,
> devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
> linux-amlogic@lists.infradead.org
>
>
> On Tue, Aug 26, 2025 at 10:10:09AM +0800, Xianwei Zhao via B4 Relay wrote:
>> From: Feng Chen<feng.chen@amlogic.com>
>>
>> The Flash Controller is derived by adding an SPI path to the original
>> raw NAND controller. This controller supports two modes: raw mode and
>> SPI mode. The raw mode has already been implemented in the community,
>> and the SPI mode is described here.
>>
>> Add bindings for Amlogic A113L2 SPI Flash Controller.
>>
>> Signed-off-by: Feng Chen<feng.chen@amlogic.com>
>> Signed-off-by: Xianwei Zhao<xianwei.zhao@amlogic.com>
>> ---
>> .../devicetree/bindings/spi/amlogic,a4-spifc.yaml | 82 ++++++++++++++++++++++
>> 1 file changed, 82 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/spi/amlogic,a4-spifc.yaml b/Documentation/devicetree/bindings/spi/amlogic,a4-spifc.yaml
>> new file mode 100644
>> index 000000000000..80a89408a832
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/spi/amlogic,a4-spifc.yaml
>> @@ -0,0 +1,82 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +# Copyright (C) 2025 Amlogic, Inc. All rights reserved
>> +%YAML 1.2
>> +---
>> +$id:http://devicetree.org/schemas/spi/amlogic,a4-spifc.yaml#
>> +$schema:http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: SPI flash controller for Amlogic ARM SoCs
>> +
>> +maintainers:
>> + - Liang Yang<liang.yang@amlogic.com>
>> + - Feng Chen<feng.chen@amlogic.com>
>> + - Xianwei Zhao<xianwei.zhao@amlogic.com>
>> +
>> +description:
>> + The Amlogic SPI flash controller is an extended version of the Amlogic NAND
>> + flash controller. It supports SPI Nor Flash and SPI NAND Flash(where the Host
>> + ECC HW engine could be enabled).
>> +
>> +allOf:
>> + - $ref: /schemas/spi/spi-controller.yaml#
>> +
>> +properties:
>> + compatible:
>> + const: amlogic,a4-spifc
>> +
>> + reg:
>> + maxItems: 1
>> +
>> + clocks:
>> + items:
>> + - description: clock apb gate
>> + - description: clock used for the controller
>> +
>> + clock-names:
>> + items:
>> + - const: gate
>> + - const: core
>> +
>> + interrupts:
>> + maxItems: 1
>> +
>> + amlogic,rx-adj:
>> + description:
>> + Adjust sample timing for RX, Sampling time move later by 1 bus clock.
> By 1 bus clock? Or by up to 3? I'd suggest rewording this to something
> like "Number of clock cycles by which sampling is delayed" or along
> those lines.
>
Will do.
>> + $ref: /schemas/types.yaml#/definitions/uint32
>> + enum: [0, 1, 2, 3]
>> + default: 0
>> +
>> +required:
>> + - compatible
>> + - reg
>> + - clocks
>> + - clock-names
>> +
>> +unevaluatedProperties: false
>> +
>> +examples:
>> + - |
>> + sfc0: spi@fe08d000 {
>> + compatible = "amlogic,a4-spifc";
>> + reg = <0xfe08d000 0x800>;
>> + clocks = <&clkc_periphs 31>,
>> + <&clkc_periphs 102>;
>> + clock-names = "gate", "core";
>> +
>> + pinctrl-0 = <&spiflash_default>;
>> + pinctrl-names = "default";
>> +
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + flash@0 {
>> + compatible = "spi-nand";
>> + reg = <0>;
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + nand-ecc-engine = <&sfc0>;
>> + nand-ecc-strength = <8>;
>> + nand-ecc-step-size = <512>;
>> + };
>> + };
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2025-08-27 2:16 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-26 2:10 [PATCH v3 0/3] support for Amlogic SPI Flash Controller IP Xianwei Zhao via B4 Relay
2025-08-26 2:10 ` [PATCH v3 1/3] spi: dt-bindings: add Amlogic A113L2 SFC Xianwei Zhao via B4 Relay
2025-08-26 17:51 ` Conor Dooley
2025-08-27 2:14 ` Xianwei Zhao [this message]
2025-08-26 2:10 ` [PATCH v3 2/3] spi: amlogic: add driver for Amlogic SPI Flash Controller Xianwei Zhao via B4 Relay
2025-08-26 2:10 ` [PATCH v3 3/3] MAINTAINERS: Add an entry for Amlogic spifc driver Xianwei Zhao via B4 Relay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=220e4324-ac16-40be-8793-48c0b3e2ca0e@amlogic.com \
--to=xianwei.zhao@amlogic.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=conor@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=feng.chen@amlogic.com \
--cc=krzk+dt@kernel.org \
--cc=liang.yang@amlogic.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®