From mboxrd@z Thu Jan 1 00:00:00 1970 From: narmstrong@baylibre.com (Neil Armstrong) Date: Tue, 2 Jan 2018 13:43:17 +0100 Subject: [PATCH 1/3] ARM: dts: meson8b: grow the reset controller memory zone In-Reply-To: <20171226114345.23905-2-martin.blumenstingl@googlemail.com> References: <20171226114345.23905-1-martin.blumenstingl@googlemail.com> <20171226114345.23905-2-martin.blumenstingl@googlemail.com> Message-ID: <23835822-91c7-f1ea-c56c-21691a83a614@baylibre.com> To: linus-amlogic@lists.infradead.org List-Id: linus-amlogic.lists.infradead.org On 26/12/2017 12:43, Martin Blumenstingl wrote: > The reset controller in the Meson8b SoCs also supports level resets. > These use the same defines (from > dt-bindings/reset/amlogic,meson8b-reset.h) as the reset pulses. > > The reset-meson driver internally handles the difference if a consumer > requests a reset pulse or a level reset. However, for this to work we > must extend the memory zone of the reset controller. > > Suggested-by: Neil Armstrong > Signed-off-by: Martin Blumenstingl > --- > arch/arm/boot/dts/meson8b.dtsi | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi > index df21b066c60b..ade602bbe482 100644 > --- a/arch/arm/boot/dts/meson8b.dtsi > +++ b/arch/arm/boot/dts/meson8b.dtsi > @@ -257,7 +257,7 @@ > > reset: reset-controller at 4404 { > compatible = "amlogic,meson8b-reset"; > - reg = <0x4404 0x20>; > + reg = <0x4404 0x9c>; > #reset-cells = <1>; > }; > > Reviewed-by: Neil Armstrong