From: narmstrong@baylibre.com (Neil Armstrong)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH] ARM64: dts: meson-gxl-s905x-khadas-vim enable Bluetooth
Date: Mon, 5 Nov 2018 17:42:31 +0100 [thread overview]
Message-ID: <277b9fee-de65-41e6-4243-c13142191b5c@baylibre.com> (raw)
In-Reply-To: <1539432427-11779-1-git-send-email-christianshewitt@gmail.com>
On 13/10/2018 14:07, Christian Hewitt wrote:
> This enables Bluetooth support for the following models:
>
> - Khadas VIM basic (AP6212) using firmware BCM43438A1.hcd
> - Khadas VIM pro (AP6255) using firmware BCM4345C0.hcd
>
> The AP6212 module used on the VIM basic has an ID clash with another
> device. To get Bluetooth working you either need to apply a kernel
> patch to drivers/bluetooth/btbcm.c so 0x2209 loads BCM43438A1 or the
> BCM43438A1.hcd firmware must be renamed to BCM43430A1.hcd.
>
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> ---
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
> index d32cf38..7e0717d 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
> @@ -187,6 +187,13 @@
> };
> };
>
> +&uart_A {
> + bluetooth {
> + compatible = "brcm,bcm43438-bt";
> + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
> + };
> +};
> +
> /* This is brought out on the Linux_RX (18) and Linux_TX (19) pins: */
> &uart_AO {
> status = "okay";
>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
next prev parent reply other threads:[~2018-11-05 16:42 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-13 12:07 Christian Hewitt
2018-11-05 16:42 ` Neil Armstrong [this message]
2018-11-14 23:23 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=277b9fee-de65-41e6-4243-c13142191b5c@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=linus-amlogic@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®