[PATCH v3 04/10] i2c: meson: use i2c core for DT clock-frequency parsing

[hkallweit1@gmail.com (Heiner Kallweit)]

We don't have to parse the DT manually to retrieve the bus frequency
and we don't have to maintain an own default for the bus frequency.
Let the i2c core do this for us.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
---
v2:
- added Reviewed-by
v3:
- changed order of patches
---
 drivers/i2c/busses/i2c-meson.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/i2c/busses/i2c-meson.c b/drivers/i2c/busses/i2c-meson.c
index e597764e..ac0ac82d 100644
--- a/drivers/i2c/busses/i2c-meson.c
+++ b/drivers/i2c/busses/i2c-meson.c
@@ -38,7 +38,6 @@
 #define REG_CTRL_CLKDIV_MASK	((BIT(10) - 1) << REG_CTRL_CLKDIV_SHIFT)
 
 #define I2C_TIMEOUT_MS		500
-#define DEFAULT_FREQ		100000
 
 enum {
 	TOKEN_END = 0,
@@ -387,15 +386,14 @@ static int meson_i2c_probe(struct platform_device *pdev)
 	struct device_node *np = pdev->dev.of_node;
 	struct meson_i2c *i2c;
 	struct resource *mem;
-	u32 freq;
+	struct i2c_timings timings;
 	int irq, ret = 0;
 
 	i2c = devm_kzalloc(&pdev->dev, sizeof(struct meson_i2c), GFP_KERNEL);
 	if (!i2c)
 		return -ENOMEM;
 
-	if (of_property_read_u32(pdev->dev.of_node, "clock-frequency", &freq))
-		freq = DEFAULT_FREQ;
+	i2c_parse_fw_timings(&pdev->dev, &timings, true);
 
 	i2c->dev = &pdev->dev;
 	platform_set_drvdata(pdev, i2c);
@@ -453,7 +451,7 @@ static int meson_i2c_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	meson_i2c_set_clk_div(i2c, freq);
+	meson_i2c_set_clk_div(i2c, timings.bus_freq_hz);
 
 	return 0;
 }
-- 
2.12.0