From: Neil Armstrong <narmstrong@baylibre.com>
To: Marek Szyprowski <m.szyprowski@samsung.com>,
linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Kevin Hilman <khilman@baylibre.com>,
Dongjin Kim <tobetter@gmail.com>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
Jerome Brunet <jbrunet@baylibre.com>
Subject: Re: [PATCH v2] arm64: dts: meson: switch TFLASH_VDD_EN pin to open drain on Odroid-C4
Date: Mon, 25 Jan 2021 19:37:33 +0100 [thread overview]
Message-ID: <3375145a-a9cc-3559-33fc-a0e0b2d5e977@baylibre.com> (raw)
In-Reply-To: <20210122055218.27241-1-m.szyprowski@samsung.com>
On 22/01/2021 06:52, Marek Szyprowski wrote:
> For the proper reboot Odroid-C4 board requires to switch TFLASH_VDD_EN
> pin to the high impedance mode, otherwise the board is stuck in the
> middle of loading early stages of the bootloader from SD card.
>
> This can be achieved by using the OPEN_DRAIN flag instead of the
> ACTIVE_HIGH, what will leave the pin in input mode to achieve high state
> (pin has the pull-up) and solve the issue.
>
> Suggested-by: Neil Armstrong <narmstrong@baylibre.com>
> Fixes: 326e57518b0d ("arm64: dts: meson-sm1: add support for Hardkernel ODROID-C4")
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
> Here is a discussion on u-boot's mailing list that inspired this patch:
> https://lists.denx.de/pipermail/u-boot/2020-December/435295.html
>
> Changelog:
> v2:
> - fixed typo in the commit message
>
> v1: https://lore.kernel.org/linux-amlogic/20201218102228.16211-1-m.szyprowski@samsung.com/
> - initial version
> ---
> arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
> index cf5a98f0e47c..a712273c905a 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
> @@ -52,7 +52,7 @@
> regulator-min-microvolt = <3300000>;
> regulator-max-microvolt = <3300000>;
>
> - gpio = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
> + gpio = <&gpio_ao GPIOAO_3 GPIO_OPEN_DRAIN>;
> enable-active-high;
> regulator-always-on;
> };
>
Hi Kevin,
The same fix was pushed on u-boot and solves the issue.
Could you take it for fixes ?
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Neil
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2021-01-25 18:37 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20210122055227eucas1p1a61e2ec3e562ed13a6b8decb5069c180@eucas1p1.samsung.com>
2021-01-22 5:52 ` Marek Szyprowski
2021-01-25 18:37 ` Neil Armstrong [this message]
2021-01-25 18:42 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3375145a-a9cc-3559-33fc-a0e0b2d5e977@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=b.zolnierkie@samsung.com \
--cc=jbrunet@baylibre.com \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=m.szyprowski@samsung.com \
--cc=martin.blumenstingl@googlemail.com \
--cc=tobetter@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®