[PATCH 1/1] ARM64: dts: meson-gx-p23x-q20x: move the wifi node to each board's .dts

[narmstrong@baylibre.com (Neil Armstrong)]

On 23/06/2018 21:38, Martin Blumenstingl wrote:
> meson-gx-p23x-q20x.dtsi is currently used by five boards:
> - Amlogic P230 and P231 (which should be identical, apart from the
>   external RGMII PHY on P230 whereas P231 can only use the internal PHY)
> - Amlogic Q200 (identical to P230 but with an S912 GXM SoC instead of a
>   GXL S905D SoC) and Q201 (identical to P231 but with an S912 GXM SoC
>   instead of a GXL S905D SoC)
> - NEXBOX A1 (based on the S912 GXM SoC)
> 
> The Amlogic P230 board uses a Broadcom BCM4356 SDIO wifi chip. Since the
> other Amlogic reference design boards are very similar it's safe to
> assume that these also use a Broadcom based SDIO wifi chip (which is
> also how it was configured in meson-gx-p23x-q20x.dtsi).
> 
> However, NEXBOX A1 comes with a "longsys LTM8830" SDIO wifi module,
> which is based on the "Qualcomm Atheros QCA9377-3(QCA1023-0)" chipset.
> 
> Thus move the wifi node from meson-gx-p23x-q20x.dtsi to each of the
> four Amlogic reference board's .dts files.
> There are no devicetree bindings for the QCA9377 SDIO wifi module yet,
> so nothing is added to meson-gxm-nexbox-a1.dts.
> 
> Fixes: f51b454549b812 ("ARM64: dts: meson-gxm: Add support for the Nexbox A1")
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
>  arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi  | 5 -----
>  arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts | 7 +++++++
>  arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts | 7 +++++++
>  arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts       | 7 +++++++
>  arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts       | 7 +++++++
>  5 files changed, 28 insertions(+), 5 deletions(-)
> 
[...]
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>