From: Neil Armstrong <narmstrong@baylibre.com>
To: Jerome Brunet <jbrunet@baylibre.com>,
Andrzej Hajda <a.hajda@samsung.com>
Cc: Kevin Hilman <khilman@baylibre.com>,
linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
dri-devel@lists.freedesktop.org, Jonas Karlman <jonas@kwiboo.se>
Subject: Re: [PATCH v2 0/8] drm/bridge: dw-hdmi: improve i2s support
Date: Mon, 12 Aug 2019 14:19:25 +0200 [thread overview]
Message-ID: <408dffda-fb9c-5f57-4f7b-404437359a69@baylibre.com> (raw)
In-Reply-To: <20190812120726.1528-1-jbrunet@baylibre.com>
Hi,
On 12/08/2019 14:07, Jerome Brunet wrote:
> The purpose of this patchset is to improve the support of the i2s
> interface of the synopsys hdmi controller.
>
> Once applied, the interface should support all the usual i2s bus formats,
> 8 channels playback and properly setup the channel number and allocation
> in the infoframes.
>
> Also, the dw-hdmi i2s interface will now provide the eld to the generic
> hdmi-codec so it can expose the related controls to user space.
>
> This work was inspired by Jonas Karlman's work, available here [0].
>
> This was tested the Amlogic meson-g12a-sei510 platform.
> For this specific platform, which uses codec2codec links, there is a
> runtime dependency for patch 8 on this ASoC series [1].
>
> Changes since v1 [2]:
> * Fix copy size in .get_eld()
>
> [0]: https://github.com/Kwiboo/linux-rockchip/commits/rockchip-5.2-for-libreelec-v5.2.3
> [1]: https://lkml.kernel.org/r/20190725165949.29699-1-jbrunet@baylibre.com
> [2]: https://lkml.kernel.org/r/20190805134102.24173-1-jbrunet@baylibre.com
>
> Jerome Brunet (8):
> drm/bridge: dw-hdmi-i2s: support more i2s format
> drm/bridge: dw-hdmi: move audio channel setup out of ahb
> drm/bridge: dw-hdmi: set channel count in the infoframes
> drm/bridge: dw-hdmi-i2s: enable lpcm multi channels
> drm/bridge: dw-hdmi-i2s: set the channel allocation
> drm/bridge: dw-hdmi-i2s: reset audio fifo before applying new params
> drm/bridge: dw-hdmi-i2s: enable only the required i2s lanes
> drm/bridge: dw-hdmi-i2s: add .get_eld support
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Jonas, is patch 8 ok for you now ? If yes I'll apply them to drm-misc-next.
Neil
>
> .../drm/bridge/synopsys/dw-hdmi-ahb-audio.c | 20 ++-----
> .../gpu/drm/bridge/synopsys/dw-hdmi-audio.h | 1 +
> .../drm/bridge/synopsys/dw-hdmi-i2s-audio.c | 60 +++++++++++++++++--
> drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 37 ++++++++++++
> drivers/gpu/drm/bridge/synopsys/dw-hdmi.h | 13 +++-
> include/drm/bridge/dw_hdmi.h | 2 +
> 6 files changed, 108 insertions(+), 25 deletions(-)
>
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2019-08-12 12:20 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-12 12:07 Jerome Brunet
2019-08-12 12:07 ` [PATCH v2 1/8] drm/bridge: dw-hdmi-i2s: support more i2s format Jerome Brunet
2019-08-12 12:07 ` [PATCH v2 2/8] drm/bridge: dw-hdmi: move audio channel setup out of ahb Jerome Brunet
2019-08-12 12:07 ` [PATCH v2 3/8] drm/bridge: dw-hdmi: set channel count in the infoframes Jerome Brunet
2019-08-12 12:07 ` [PATCH v2 4/8] drm/bridge: dw-hdmi-i2s: enable lpcm multi channels Jerome Brunet
2019-08-12 12:07 ` [PATCH v2 5/8] drm/bridge: dw-hdmi-i2s: set the channel allocation Jerome Brunet
2019-08-12 12:07 ` [PATCH v2 6/8] drm/bridge: dw-hdmi-i2s: reset audio fifo before applying new params Jerome Brunet
2019-08-12 12:07 ` [PATCH v2 7/8] drm/bridge: dw-hdmi-i2s: enable only the required i2s lanes Jerome Brunet
2019-08-12 12:07 ` [PATCH v2 8/8] drm/bridge: dw-hdmi-i2s: add .get_eld support Jerome Brunet
2019-08-12 12:50 ` [RESEND PATCH " Jerome Brunet
2019-08-14 10:08 ` Jonas Karlman
2019-08-14 13:05 ` Neil Armstrong
2019-08-12 12:19 ` Neil Armstrong [this message]
2019-08-12 12:35 ` [PATCH v2 0/8] drm/bridge: dw-hdmi: improve i2s support Jerome Brunet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=408dffda-fb9c-5f57-4f7b-404437359a69@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=a.hajda@samsung.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=jbrunet@baylibre.com \
--cc=jonas@kwiboo.se \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®