Re: [PATCH 0/7] Baisc devicetree support for Amlogic S6 S7 and S7D

[neil.armstrong@linaro.org]

On 28/04/2025 09:57, Xianwei Zhao wrote:
> Hi Neil,
>     Thanks for your reply.
> 
> On 2025/4/23 15:23, neil.armstrong@linaro.org wrote:
>> [ EXTERNAL EMAIL ]
>>
>> Hi,
>>
>> On 23/04/2025 08:15, Xianwei Zhao wrote:
>>> Hi Neil,
>>>     Thanks for your reply.
>>>
>>> On 2025/4/22 21:49, Neil Armstrong wrote:
>>>> [ EXTERNAL EMAIL ]
>>>>
>>>> Hi,
>>>>
>>>> On 22/04/2025 13:45, Xianwei Zhao wrote:
>>>>> Hi Neil,
>>>>>     A gentle ping, thanks.
>>>>
>>>> I'll apply them this week except patch 4,
>>>>
>>>> so can you send patch 4 separately since it goes via the tty tree ?
>>>>
>>>
>>> I will send patch 4 separately.
>>> The following patches(5 6 7) can be not included for now. Without the patch 4, the command "make ARCH=arm64 dtbs_check W=1" will fail to execute.
>>
>> I know, but since it's reviewed, Greg KH will pick it for the next release so it's fine.
>>
> 
> I have already sent patch 4 separately. From Rob's reply, do you think it can be picked up together?
> 
> https://lore.kernel.org/all/CAL_JsqKD=yespd0WM90VBr_XWdppimzDzecmwNfGMV+hNSHuRA@mail.gmail.com/


Greg KH picked it already.

Neil

> 
>> Neil
>>
>>>
>>>> Thanks,
>>>> Neil
>>>>
>>>>>
>>>>> On 2025/3/17 15:16, Xianwei Zhao via B4 Relay wrote:
>>>>>> [ EXTERNAL EMAIL ]
>>>>>>
>>>>>> Amlogic S6 S7 and S7D are application processors designed for
>>>>>> hybrid OTT/IP Set Top Box and high-end media box applications.
>>>>>>
>>>>>> Add the new S6 SoC/board device tree bindings.
>>>>>> Add the new S7 SoC/board device tree bindings.
>>>>>> Add the new S7D SoC/board device tree bindings.
>>>>>>
>>>>>> Add basic support for the S6 based Amlogic BL209 board, which describes
>>>>>> the following components: CPU, GIC, IRQ, Timer and UART. These are capable of
>>>>>> booting up into the serial console.
>>>>>>
>>>>>> Add basic support for the S7 based Amlogic BP201 board, which describes
>>>>>> the following components: CPU, GIC, IRQ, Timer and UART. These are capable of
>>>>>> booting up into the serial console.
>>>>>>
>>>>>> Add basic support for the S7D based Amlogic BM202 board, which describes
>>>>>> the following components: CPU, GIC, IRQ, Timer and UART. These are capable of
>>>>>> booting up into the serial console.
>>>>>>
>>>>>> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
>>>>>> ---
>>>>>> Xianwei Zhao (7):
>>>>>>        dt-bindings: arm: amlogic: add S6 support
>>>>>>        dt-bindings: arm: amlogic: add S7 support
>>>>>>        dt-bindings: arm: amlogic: add S7D support
>>>>>>        dt-bindings: serial: amlogic,meson-uart: Add compatible string for S6/S7/S7D
>>>>>>        arm64: dts: add support for S6 based Amlogic BL209
>>>>>>        arm64: dts: add support for S7 based Amlogic BP201
>>>>>>        arm64: dts: add support for S7D based Amlogic BM202
>>>>>>
>>>>>>   Documentation/devicetree/bindings/arm/amlogic.yaml | 18 ++++
>>>>>>   .../bindings/serial/amlogic,meson-uart.yaml        |  3 +
>>>>>>   arch/arm64/boot/dts/amlogic/Makefile               |  3 +
>>>>>>   .../boot/dts/amlogic/amlogic-s6-s905x5-bl209.dts   | 42 +++++++++
>>>>>>   arch/arm64/boot/dts/amlogic/amlogic-s6.dtsi        | 97 +++++++++++++++++++++
>>>>>>   .../boot/dts/amlogic/amlogic-s7-s805x3-bp201.dts   | 41 +++++++++
>>>>>>   arch/arm64/boot/dts/amlogic/amlogic-s7.dtsi        | 99 ++++++++++++++++++++++
>>>>>>   .../boot/dts/amlogic/amlogic-s7d-s905x5m-bm202.dts | 41 +++++++++
>>>>>>   arch/arm64/boot/dts/amlogic/amlogic-s7d.dtsi       | 99 ++++++++++++++++++++++
>>>>>>   9 files changed, 443 insertions(+)
>>>>>> ---
>>>>>> base-commit: 73e4ffb27bb8a093d557bb2dac1a271474cca99c
>>>>>> change-id: 20250221-s6-s7-basic-f300c30877e6
>>>>>>
>>>>>> Best regards,
>>>>>> -- 
>>>>>> Xianwei Zhao <xianwei.zhao@amlogic.com>
>>>>>>
>>>>>>
>>>>
>>


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic