[PATCH 4/6] efi_loader: Improve .dtb search for arm64

[afaerber@suse.de (Andreas Färber)]

Am 12.07.2016 um 09:29 schrieb Alexander Graf:
> On 12.07.16 06:21, Andreas F?rber wrote:
>> On arm64 Linux device trees are organized by SoC vendor. Therefore we
>> need to search the vendor subdirectory as well.
>>
>> Since the SoC vendor may be different from ${vendor}, introduce a new
>> ${soc_vendor}. If this is not set, the behavior remains unchanged.
>>
>> Cc: Alexander Graf <agraf@suse.de>
>> Signed-off-by: Andreas F?rber <afaerber@suse.de>
> 
> Stephen had pretty strong opinions on the naming, mostly because "pxe
> boot" uses the same naming scheme. So we should either change it there
> as well to stay consistent or just make the implicit ruling always work :).
> 
> I guess the best case would be to fix up the path names of boards so
> that $vendor is always $soc_vendor. Do you have an example where that
> wouldn't work?

AFAIU for U-Boot $vendor is often the board vendor and matches the
board/ subdirectory, so there may be plenty vendors.  I didn't see any
code setting this value, so I assume this comes from .config options.

My $soc_vendor is the SoC vendor instead and only for the environment.

And because there were opinions on how to form the 32-bit efi_fdtfile,
both Tom and Stephen were CC'ed on the cover letter. :)

On the dragonboard410c:
CONFIG_SYS_SOC="snapdragon"
CONFIG_SYS_VENDOR="qualcomm"
CONFIG_SYS_BOARD="dragonboard410c"
CONFIG_SYS_CONFIG_NAME="dragonboard410c"
soc=snapdragon
vendor=qualcomm
board=dragonboard410c
board_name=dragonboard410c
=> Therefore my previous patch setting fdtfile to apq8016-sbc.dtb,
because it is absolutely different. This patch allows searching qcom/
for our dtb-qcom aarch64 openSUSE package.

On the odroid-c2:
CONFIG_SYS_SOC="meson"
CONFIG_SYS_VENDOR="amlogic"
CONFIG_SYS_BOARD="odroid-c2"
CONFIG_SYS_CONFIG_NAME="odroid-c2"
board=odroid-c2
board_name=odroid-c2
soc=meson
vendor=amlogic
=> Here $vendor would match Linux' dts subdirectory, but $soc and $board
are wrong, I need fdtfile=meson-gxbb-odroidc2.dtb.

But maybe I'm just not understanding what all those configs are good for
and how deeply they're tied to board/ subdirectories and mach-foo? If we
can clean them up to match Linux then all the better. If that were
intended, I wonder why no one flagged that during review.

Anyway, maybe add an else clause to this patch and reuse $vendor if
$soc_vendor is unavailable?

Regards,
Andreas

-- 
SUSE Linux GmbH, Maxfeldstr. 5, 90409 N?rnberg, Germany
GF: Felix Imend?rffer, Jane Smithard, Graham Norton
HRB 21284 (AG N?rnberg)