mirror of https://lore.kernel.org/linux-amlogic/
 help / color / mirror / Atom feed
From: Neil Armstrong <narmstrong@baylibre.com>
To: Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
	linux-amlogic@lists.infradead.org
Cc: khilman@baylibre.com, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 1/2] ARM: dts: meson: Add the AIU audio controller
Date: Mon, 26 Jul 2021 10:00:08 +0200	[thread overview]
Message-ID: <48116849-8a76-7048-2d71-9a2853db94b5@baylibre.com> (raw)
In-Reply-To: <20210717233030.331273-2-martin.blumenstingl@googlemail.com>

On 18/07/2021 01:30, Martin Blumenstingl wrote:
> Add the AIU audio controller to the Amlogic Meson6/8/8b/8m2 SoC DT. This
> provides I2S and SPDIF outputs as well as codec glues for the internal
> HDMI controller.
> Also add the clock inputs and pin mux definitions on Meson8/8b/8m2. On
> Meson6 this is omitted because we neither have a clock nor pin
> controller node there yet.
> 
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
>  arch/arm/boot/dts/meson.dtsi   | 12 +++++++
>  arch/arm/boot/dts/meson8.dtsi  | 63 ++++++++++++++++++++++++++++++++++
>  arch/arm/boot/dts/meson8b.dtsi | 63 ++++++++++++++++++++++++++++++++++
>  3 files changed, 138 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi
> index bd0e864964e9..3be7cba603d5 100644
> --- a/arch/arm/boot/dts/meson.dtsi
> +++ b/arch/arm/boot/dts/meson.dtsi
> @@ -5,6 +5,7 @@
>  
>  #include <dt-bindings/interrupt-controller/irq.h>
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/sound/meson-aiu.h>
>  
>  / {
>  	#address-cells = <1>;
> @@ -36,6 +37,17 @@ hhi: system-controller@4000 {
>  				reg = <0x4000 0x400>;
>  			};
>  
> +			aiu: audio-controller@5400 {
> +				compatible = "amlogic,aiu";
> +				#sound-dai-cells = <2>;
> +				sound-name-prefix = "AIU";
> +				reg = <0x5400 0x2ac>;
> +				interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>,
> +					     <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
> +				interrupt-names = "i2s", "spdif";
> +				status = "disabled";
> +			};
> +
>  			assist: assist@7c00 {
>  				compatible = "amlogic,meson-mx-assist", "syscon";
>  				reg = <0x7c00 0x200>;
> diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
> index 686c7b7c79d5..f80ddc98d3a2 100644
> --- a/arch/arm/boot/dts/meson8.dtsi
> +++ b/arch/arm/boot/dts/meson8.dtsi
> @@ -317,6 +317,29 @@ mali: gpu@c0000 {
>  	};
>  }; /* end of / */
>  
> +&aiu {
> +	compatible = "amlogic,aiu-meson8", "amlogic,aiu";
> +	clocks = <&clkc CLKID_AIU_GLUE>,
> +		 <&clkc CLKID_I2S_OUT>,
> +		 <&clkc CLKID_AOCLK_GATE>,
> +		 <&clkc CLKID_CTS_AMCLK>,
> +		 <&clkc CLKID_MIXER_IFACE>,
> +		 <&clkc CLKID_IEC958>,
> +		 <&clkc CLKID_IEC958_GATE>,
> +		 <&clkc CLKID_CTS_MCLK_I958>,
> +		 <&clkc CLKID_CTS_I958>;
> +	clock-names = "pclk",
> +		      "i2s_pclk",
> +		      "i2s_aoclk",
> +		      "i2s_mclk",
> +		      "i2s_mixer",
> +		      "spdif_pclk",
> +		      "spdif_aoclk",
> +		      "spdif_mclk",
> +		      "spdif_mclk_sel";
> +	resets = <&reset RESET_AIU>;
> +};
> +
>  &aobus {
>  	pmu: pmu@e0 {
>  		compatible = "amlogic,meson8-pmu", "syscon";
> @@ -340,6 +363,38 @@ gpio_ao: ao-bank@14 {
>  			gpio-ranges = <&pinctrl_aobus 0 0 16>;
>  		};
>  
> +		i2s_am_clk_pins: i2s-am-clk-out {
> +			mux {
> +				groups = "i2s_am_clk_out_ao";
> +				function = "i2s_ao";
> +				bias-disable;
> +			};
> +		};
> +
> +		i2s_out_ao_clk_pins: i2s-ao-clk-out {
> +			mux {
> +				groups = "i2s_ao_clk_out_ao";
> +				function = "i2s_ao";
> +				bias-disable;
> +			};
> +		};
> +
> +		i2s_out_lr_clk_pins: i2s-lr-clk-out {
> +			mux {
> +				groups = "i2s_lr_clk_out_ao";
> +				function = "i2s_ao";
> +				bias-disable;
> +			};
> +		};
> +
> +		i2s_out_ch01_ao_pins: i2s-out-ch01 {
> +			mux {
> +				groups = "i2s_out_ch01_ao";
> +				function = "i2s_ao";
> +				bias-disable;
> +			};
> +		};
> +
>  		uart_ao_a_pins: uart_ao_a {
>  			mux {
>  				groups = "uart_tx_ao_a", "uart_rx_ao_a";
> @@ -460,6 +515,14 @@ mux {
>  			};
>  		};
>  
> +		spdif_out_pins: spdif-out {
> +			mux {
> +				groups = "spdif_out";
> +				function = "spdif";
> +				bias-disable;
> +			};
> +		};
> +
>  		spi_nor_pins: nor {
>  			mux {
>  				groups = "nor_d", "nor_q", "nor_c", "nor_cs";
> diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
> index c02b03cbcdf4..b49b7cbaed4e 100644
> --- a/arch/arm/boot/dts/meson8b.dtsi
> +++ b/arch/arm/boot/dts/meson8b.dtsi
> @@ -279,6 +279,29 @@ mali: gpu@c0000 {
>  	};
>  }; /* end of / */
>  
> +&aiu {
> +	compatible = "amlogic,aiu-meson8b", "amlogic,aiu";
> +	clocks = <&clkc CLKID_AIU_GLUE>,
> +		 <&clkc CLKID_I2S_OUT>,
> +		 <&clkc CLKID_AOCLK_GATE>,
> +		 <&clkc CLKID_CTS_AMCLK>,
> +		 <&clkc CLKID_MIXER_IFACE>,
> +		 <&clkc CLKID_IEC958>,
> +		 <&clkc CLKID_IEC958_GATE>,
> +		 <&clkc CLKID_CTS_MCLK_I958>,
> +		 <&clkc CLKID_CTS_I958>;
> +	clock-names = "pclk",
> +		      "i2s_pclk",
> +		      "i2s_aoclk",
> +		      "i2s_mclk",
> +		      "i2s_mixer",
> +		      "spdif_pclk",
> +		      "spdif_aoclk",
> +		      "spdif_mclk",
> +		      "spdif_mclk_sel";
> +	resets = <&reset RESET_AIU>;
> +};
> +
>  &aobus {
>  	pmu: pmu@e0 {
>  		compatible = "amlogic,meson8b-pmu", "syscon";
> @@ -302,6 +325,46 @@ gpio_ao: ao-bank@14 {
>  			gpio-ranges = <&pinctrl_aobus 0 0 16>;
>  		};
>  
> +		i2s_am_clk_pins: i2s-am-clk-out {
> +			mux {
> +				groups = "i2s_am_clk_out";
> +				function = "i2s";
> +				bias-disable;
> +			};
> +		};
> +
> +		i2s_out_ao_clk_pins: i2s-ao-clk-out {
> +			mux {
> +				groups = "i2s_ao_clk_out";
> +				function = "i2s";
> +				bias-disable;
> +			};
> +		};
> +
> +		i2s_out_lr_clk_pins: i2s-lr-clk-out {
> +			mux {
> +				groups = "i2s_lr_clk_out";
> +				function = "i2s";
> +				bias-disable;
> +			};
> +		};
> +
> +		i2s_out_ch01_ao_pins: i2s-out-ch01 {
> +			mux {
> +				groups = "i2s_out_01";
> +				function = "i2s";
> +				bias-disable;
> +			};
> +		};
> +
> +		spdif_out_1_pins: spdif-out-1 {
> +			mux {
> +				groups = "spdif_out_1";
> +				function = "spdif_1";
> +				bias-disable;
> +			};
> +		};
> +
>  		uart_ao_a_pins: uart_ao_a {
>  			mux {
>  				groups = "uart_tx_ao_a", "uart_rx_ao_a";
> 


Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

  reply	other threads:[~2021-07-26  8:00 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-17 23:30 [PATCH v2 0/2] Meson8/Meson8b: sound card support Martin Blumenstingl
2021-07-17 23:30 ` [PATCH v2 1/2] ARM: dts: meson: Add the AIU audio controller Martin Blumenstingl
2021-07-26  8:00   ` Neil Armstrong [this message]
2021-07-17 23:30 ` [PATCH v2 2/2] ARM: dts: meson8b: ec100: wire up the RT5640 audio codec Martin Blumenstingl
2021-07-26  8:00   ` Neil Armstrong
2021-07-26  8:12 ` [PATCH v2 0/2] Meson8/Meson8b: sound card support Neil Armstrong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=48116849-8a76-7048-2d71-9a2853db94b5@baylibre.com \
    --to=narmstrong@baylibre.com \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=martin.blumenstingl@googlemail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®