mirror of https://lore.kernel.org/linux-amlogic/
 help / color / mirror / Atom feed
From: Otto Meier <gf435@gmx.net>
To: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: U-Boot Mailing List <u-boot@lists.denx.de>,
	linux-amlogic@lists.infradead.org, u-boot-amlogic@groups.io,
	Neil Armstrong <narmstrong@baylibre.com>
Subject: Re: [BUG]odroid-c2 does not hotplug usb-devices
Date: Mon, 14 Dec 2020 20:33:56 +0100	[thread overview]
Message-ID: <531138bc-d343-1081-d208-ab6c98c1ddd8@gmx.net> (raw)
In-Reply-To: <CAFBinCDv+TgEgf1g7xBTknr-aJMhC3K1wOW87-06YG4sQ9wUAg@mail.gmail.com>

Hi Martin,

Am 13.12.20 um 19:46 schrieb Martin Blumenstingl:
> Hi Otto,
>
> On Mon, Dec 7, 2020 at 1:43 PM Otto Meier <gf435@gmx.net> wrote:
> [...]
>>>> So with the latest u-boot and the kernel from https://github.com/chewitt/linux/tree/amlogic-5.10.y
>>>> commit 725fc8df7898102f9031ba2075f763884ffa3ee8 everything is working again.
>>>> USB does hotplugging as expected.
>>> So, this fixes USB under Linux ?? It's not clear
> if you have time it would be great if you could figure out which of
> the patches from Christian's tree fixes USB hotplugging for you.
> Or is it fixed in Linux 5.10-rcX even without any patches?
>
The new mainline kernel 5.10.0 from Linus, without any other patches 
does detect USB hotpluging,
when using u-boot DMI: Hardkernel Co., Ltd. ODROID-C2/ODROID-C2, BIOS 
2021.01-rc3-00039-gec79f5ce22-dirty 12/08/2020
and the following u-boot patch:

--- u-boot.git/arch/arm/dts/meson-gxbb.dtsi.orig        2020-11-27 
17:20:04.624193561 +0100
+++ u-boot.git/arch/arm/dts/meson-gxbb.dtsi     2020-11-27 
17:23:18.472088934 +0100
@@ -403,36 +403,33 @@
                         gpio-ranges = <&pinctrl_periphs 0 0 119>;
                 };

-               emmc_pins: emmc {
-                       mux-0 {
-                               groups = "emmc_nand_d07",
-                                      "emmc_cmd";
-                               function = "emmc";
-                               bias-pull-up;
-                       };

-                       mux-1 {
-                               groups = "emmc_clk";
-                               function = "emmc";
-                               bias-disable;
-                       };
-               };
+                emmc_pins: emmc {
+                        mux {
+                                groups = "emmc_nand_d07",
+                                       "emmc_cmd",
+                                       "emmc_clk";
+                                function = "emmc";
+                        };
+                };

-               emmc_ds_pins: emmc-ds {
-                       mux {
-                               groups = "emmc_ds";
-                               function = "emmc";
-                               bias-pull-down;
-                       };
-               };
+                emmc_ds_pins: emmc-ds {
+                        mux {
+                                groups = "emmc_ds";
+                                function = "emmc";
+                        };
+                };

-               emmc_clk_gate_pins: emmc_clk_gate {
-                       mux {
-                               groups = "BOOT_8";
-                               function = "gpio_periphs";
-                               bias-pull-down;
-                       };
-               };
+                emmc_clk_gate_pins: emmc_clk_gate {
+                        mux {
+                                groups = "BOOT_8";
+                                function = "gpio_periphs";
+                        };
+                        cfg-pull-down {
+                                pins = "BOOT_8";
+                                bias-pull-down;
+                        };
+                };

                 nor_pins: nor {
                         mux {

When i use the last unpatched emmc bootable u-boot 2020.04 the kernel 
boots, but usb hotplugging
does not work.

Hope this describes my findings. If i can help further, please give me a 
note.

> Best regards,
> Martin
>
Best regards
Otto


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

  reply	other threads:[~2020-12-14 19:34 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-28 17:09 Otto Meier
2020-12-05 11:54 ` Martin Blumenstingl
2020-12-05 17:40   ` Otto Meier
2020-12-05 19:55     ` Martin Blumenstingl
2020-12-07 12:19       ` Otto Meier
2020-12-07 12:29         ` Neil Armstrong
2020-12-07 12:43           ` Otto Meier
2020-12-13 18:46             ` Martin Blumenstingl
2020-12-14 19:33               ` Otto Meier [this message]
2020-12-19 13:58                 ` Martin Blumenstingl
2020-12-19 18:41                   ` Otto Meier
2020-12-19 19:53                   ` Anand Moon
2020-12-19 22:31                     ` Martin Blumenstingl
2020-12-20 10:28                       ` Otto Meier
2020-12-20 13:46                       ` Anand Moon
2020-12-20 14:33                         ` Martin Blumenstingl
2020-12-21 14:15                           ` Anand Moon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=531138bc-d343-1081-d208-ab6c98c1ddd8@gmx.net \
    --to=gf435@gmx.net \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=martin.blumenstingl@googlemail.com \
    --cc=narmstrong@baylibre.com \
    --cc=u-boot-amlogic@groups.io \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®