From: Neil Armstrong <neil.armstrong@linaro.org>
To: Jan Dakinevich <jan.dakinevich@salutedevices.com>,
"Rob Herring (Arm)" <robh@kernel.org>
Cc: Jerome Brunet <jbrunet@baylibre.com>,
Xianwei Zhao <xianwei.zhao@amlogic.com>,
Lucas Tanure <tanure@linux.com>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Dmitry Rokosov <ddrokosov@sberdevices.ru>,
Conor Dooley <conor+dt@kernel.org>,
Kevin Hilman <khilman@baylibre.com>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
devicetree@vger.kernel.org, linux-amlogic@lists.infradead.org
Subject: Re: [PATCH 0/3] Introduce initial support of Amlogic AC200 board
Date: Thu, 23 May 2024 09:22:01 +0200 [thread overview]
Message-ID: <53c97dc2-8c2b-4765-ade7-6c9d0b2084ef@linaro.org> (raw)
In-Reply-To: <edc6241b-195f-4188-b802-24706ebc9541@salutedevices.com>
On 22/05/2024 19:40, Jan Dakinevich wrote:
> On 5/22/24 16:46, Rob Herring (Arm) wrote:
>>
>> On Wed, 22 May 2024 01:21:52 +0300, Jan Dakinevich wrote:
>>> - Make some cosmetics in existing device tree files;
>>>
>>> - Add the board.
>>>
>>> Jan Dakinevich (3):
>>> arch/arm64: dts: ac2xx: make common the sound card
>>> dt-bindings: arm: amlogic: document AC200 support
>>> arch/arm64: dts: ac200: introduce initial support of the board
>>>
>>> .../devicetree/bindings/arm/amlogic.yaml | 1 +
>>> .../dts/amlogic/meson-sm1-a95xf3-air-gbit.dts | 87 -------------------
>>> .../boot/dts/amlogic/meson-sm1-a95xf3-air.dts | 87 -------------------
>>> .../boot/dts/amlogic/meson-sm1-ac200.dts | 22 +++++
>>> .../boot/dts/amlogic/meson-sm1-ac2xx.dtsi | 87 +++++++++++++++++++
>>> .../boot/dts/amlogic/meson-sm1-h96-max.dts | 87 -------------------
>>> .../dts/amlogic/meson-sm1-x96-air-gbit.dts | 87 -------------------
>>> .../boot/dts/amlogic/meson-sm1-x96-air.dts | 87 -------------------
>>> 8 files changed, 110 insertions(+), 435 deletions(-)
>>> create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-ac200.dts
>>>
>>> --
>>> 2.34.1
>>>
>>>
>>>
>>
>>
>> My bot found new DTB warnings on the .dts files added or changed in this
>> series.
>>
>> Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
>> are fixed by another series. Ultimately, it is up to the platform
>> maintainer whether these warnings are acceptable or not. No need to reply
>> unless the platform maintainer has comments.
>>
>> If you already ran DT checks and didn't see these error(s), then
>> make sure dt-schema is up to date:
>>
>> pip3 install dtschema --upgrade
>>
>>
>> New warnings running 'make CHECK_DTBS=y amlogic/meson-sm1-a95xf3-air-gbit.dtb amlogic/meson-sm1-a95xf3-air.dtb amlogic/meson-sm1-ac200.dtb amlogic/meson-sm1-h96-max.dtb amlogic/meson-sm1-x96-air-gbit.dtb amlogic/meson-sm1-x96-air.dtb' for 20240521222155.28094-1-jan.dakinevich@salutedevices.com:
>>
>> arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dtb: audio-controller@380: compatible: ['amlogic,sm1-tdmin', 'amlogic,axg-tdmin'] is too long
>> from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-formatters.yaml#
>> arch/arm64/boot/dts/amlogic/meson-sm1-ac200.dtb: /soc/bus@ff600000/bus@60000/clock-controller@0: failed to match any schema with compatible: ['amlogic,sm1-audio-clkc']
>> arch/arm64/boot/dts/amlogic/meson-sm1-ac200.dtb: audio-controller@300: compatible: ['amlogic,sm1-tdmin', 'amlogic,axg-tdmin'] is too long
>> from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-formatters.yaml#
>> arch/arm64/boot/dts/amlogic/meson-sm1-ac200.dtb: audio-controller@340: compatible: ['amlogic,sm1-tdmin', 'amlogic,axg-tdmin'] is too long
>> from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-formatters.yaml#
>> arch/arm64/boot/dts/amlogic/meson-sm1-ac200.dtb: audio-controller@380: compatible: ['amlogic,sm1-tdmin', 'amlogic,axg-tdmin'] is too long
>> from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-formatters.yaml#
>> arch/arm64/boot/dts/amlogic/meson-sm1-ac200.dtb: audio-controller@3c0: compatible: ['amlogic,sm1-tdmin', 'amlogic,axg-tdmin'] is too long
>> from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-formatters.yaml#
>> arch/arm64/boot/dts/amlogic/meson-sm1-ac200.dtb: /soc/bus@ff600000/bus@60000/audio-controller@744: failed to match any schema with compatible: ['amlogic,sm1-tohdmitx', 'amlogic,g12a-tohdmitx']
>> arch/arm64/boot/dts/amlogic/meson-sm1-ac200.dtb: /soc/bus@ff600000/bus@60000/audio-controller@744: failed to match any schema with compatible: ['amlogic,sm1-tohdmitx', 'amlogic,g12a-tohdmitx']
>> arch/arm64/boot/dts/amlogic/meson-sm1-ac200.dtb: sys-ctrl@0: '#address-cells', '#size-cells', 'ranges' do not match any of the regexes: 'pinctrl-[0-9]+'
>> from schema $id: http://devicetree.org/schemas/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml#
>> arch/arm64/boot/dts/amlogic/meson-sm1-ac200.dtb: audio-controller-0: clock-names:0: 'sclk' was expected
>> from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-iface.yaml#
>> arch/arm64/boot/dts/amlogic/meson-sm1-ac200.dtb: audio-controller-0: clock-names:1: 'lrclk' was expected
>> from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-iface.yaml#
>> arch/arm64/boot/dts/amlogic/meson-sm1-ac200.dtb: audio-controller-0: clock-names:2: 'mclk' was expected
>> from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-iface.yaml#
>> arch/arm64/boot/dts/amlogic/meson-sm1-ac200.dtb: audio-controller-1: clock-names:0: 'sclk' was expected
>> from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-iface.yaml#
>> arch/arm64/boot/dts/amlogic/meson-sm1-ac200.dtb: audio-controller-1: clock-names:1: 'lrclk' was expected
>> from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-iface.yaml#
>> arch/arm64/boot/dts/amlogic/meson-sm1-ac200.dtb: audio-controller-1: clock-names:2: 'mclk' was expected
>> from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-iface.yaml#
>> arch/arm64/boot/dts/amlogic/meson-sm1-ac200.dtb: audio-controller-1: Unevaluated properties are not allowed ('clock-names' was unexpected)
>> from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-iface.yaml#
>> arch/arm64/boot/dts/amlogic/meson-sm1-ac200.dtb: audio-controller-2: clock-names:0: 'sclk' was expected
>> from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-iface.yaml#
>> arch/arm64/boot/dts/amlogic/meson-sm1-ac200.dtb: audio-controller-2: clock-names:1: 'lrclk' was expected
>> from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-iface.yaml#
>> arch/arm64/boot/dts/amlogic/meson-sm1-ac200.dtb: audio-controller-2: clock-names:2: 'mclk' was expected
>> from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-iface.yaml#
>> arch/arm64/boot/dts/amlogic/meson-sm1-ac200.dtb: sound: 'anyOf' conditional failed, one must be fixed:
>> 'clocks' is a required property
>> '#clock-cells' is a required property
>> from schema $id: http://devicetree.org/schemas/clock/clock.yaml#
>>
>>
>>
>>
>>
>
> These errors were here before my modifications, and they require extra
> efforts to rework generic 'meson-sm1.dtsi' etc. But it is not the goal
> of this series. Should I do anything about this right now?
No just make sure you don't introduce new errors.
Thanks,
Neil
>
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
prev parent reply other threads:[~2024-05-23 7:22 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-21 22:21 Jan Dakinevich
2024-05-21 22:21 ` [PATCH 1/3] arch/arm64: dts: ac2xx: make common the sound card Jan Dakinevich
2024-05-23 7:36 ` Neil Armstrong
2024-05-23 9:25 ` Jan Dakinevich
2024-05-21 22:21 ` [PATCH 2/3] dt-bindings: arm: amlogic: document AC200 support Jan Dakinevich
2024-05-22 7:22 ` Krzysztof Kozlowski
2024-05-21 22:21 ` [PATCH 3/3] arch/arm64: dts: ac200: introduce initial support of the board Jan Dakinevich
2024-05-22 13:46 ` [PATCH 0/3] Introduce initial support of Amlogic AC200 board Rob Herring (Arm)
2024-05-22 17:40 ` Jan Dakinevich
2024-05-23 7:22 ` Neil Armstrong [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53c97dc2-8c2b-4765-ade7-6c9d0b2084ef@linaro.org \
--to=neil.armstrong@linaro.org \
--cc=conor+dt@kernel.org \
--cc=ddrokosov@sberdevices.ru \
--cc=devicetree@vger.kernel.org \
--cc=jan.dakinevich@salutedevices.com \
--cc=jbrunet@baylibre.com \
--cc=khilman@baylibre.com \
--cc=krzk+dt@kernel.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=martin.blumenstingl@googlemail.com \
--cc=robh@kernel.org \
--cc=tanure@linux.com \
--cc=xianwei.zhao@amlogic.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®