mirror of https://lore.kernel.org/linux-amlogic/
 help / color / mirror / Atom feed
From: Chuan Liu <chuan.liu@amlogic.com>
To: neil.armstrong@linaro.org, Kevin Hilman <khilman@baylibre.com>,
	Jerome Brunet <jbrunet@baylibre.com>,
	Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: linux-arm-kernel@lists.infradead.org,
	linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] soc: amlogic: clk-measure: Optimize the memory size of clk-measure
Date: Wed, 2 Apr 2025 16:50:05 +0800	[thread overview]
Message-ID: <57355917-8191-451e-b297-d5a9c50749d9@amlogic.com> (raw)
In-Reply-To: <774d1a84-cc35-418d-9a84-867888b843da@linaro.org>

hi Neil:

Friendly ping: This patch has been approved in review but hasn't been 
applied yet. Has it been overlooked?😉


On 2/10/2025 5:50 PM, Neil Armstrong wrote:
> [ EXTERNAL EMAIL ]
>
> On 05/02/2025 08:58, Chuan Liu via B4 Relay wrote:
>> From: Chuan Liu <chuan.liu@amlogic.com>
>>
>> Drop "CLK_MSR_MAX" and replace it with adding a member "msr_count" in
>> the structure to specify the count of msr_id.
>>
>> Mark the table of msr_id as const.
>>
>> Signed-off-by: Chuan Liu <chuan.liu@amlogic.com>
>> ---
>> The number of msr_ids for each chip is inconsistent. Defining a
>> fixed-size array for each chip to store msr_ids would waste memory.
>> ---
>> Changes in v2:
>> - Discard the global variable and restore the "priv" member in the
>> "struct meson_msr_id".
>> - Mark msr_id_table as const.
>> - Link to v1: 
>> https://lore.kernel.org/r/20250123-optimize_memory_size_of_clk_measure-v1-1-06aa6a01ff37@amlogic.com
>> ---
>>   drivers/soc/amlogic/meson-clk-measure.c | 86 
>> ++++++++++++++++++++++++---------
>>   1 file changed, 62 insertions(+), 24 deletions(-)
>>
>> diff --git a/drivers/soc/amlogic/meson-clk-measure.c 
>> b/drivers/soc/amlogic/meson-clk-measure.c
>> index a6453ffeb753..39638d6a593c 100644
>> --- a/drivers/soc/amlogic/meson-clk-measure.c
>> +++ b/drivers/soc/amlogic/meson-clk-measure.c
>> @@ -33,23 +33,26 @@ static DEFINE_MUTEX(measure_lock);
>>   #define DIV_STEP            32
>>   #define DIV_MAX                     640
>>
>> -#define CLK_MSR_MAX          128
>> -
>>   struct meson_msr_id {
>>       struct meson_msr *priv;
>>       unsigned int id;
>>       const char *name;
>>   };
>>
>> +struct meson_msr_data {
>> +     struct meson_msr_id *msr_table;
>> +     unsigned int msr_count;
>> +};
>> +
>>   struct meson_msr {
>>       struct regmap *regmap;
>> -     struct meson_msr_id msr_table[CLK_MSR_MAX];
>> +     struct meson_msr_data data;
>>   };
>>
>>   #define CLK_MSR_ID(__id, __name) \
>>       [__id] = {.id = __id, .name = __name,}
>>
>> -static struct meson_msr_id clk_msr_m8[CLK_MSR_MAX] = {
>> +static const struct meson_msr_id clk_msr_m8[] = {
>>       CLK_MSR_ID(0, "ring_osc_out_ee0"),
>>       CLK_MSR_ID(1, "ring_osc_out_ee1"),
>>       CLK_MSR_ID(2, "ring_osc_out_ee2"),
>> @@ -98,7 +101,7 @@ static struct meson_msr_id clk_msr_m8[CLK_MSR_MAX] 
>> = {
>>       CLK_MSR_ID(63, "mipi_csi_cfg"),
>>   };
>>
>> -static struct meson_msr_id clk_msr_gx[CLK_MSR_MAX] = {
>> +static const struct meson_msr_id clk_msr_gx[] = {
>>       CLK_MSR_ID(0, "ring_osc_out_ee_0"),
>>       CLK_MSR_ID(1, "ring_osc_out_ee_1"),
>>       CLK_MSR_ID(2, "ring_osc_out_ee_2"),
>> @@ -168,7 +171,7 @@ static struct meson_msr_id 
>> clk_msr_gx[CLK_MSR_MAX] = {
>>       CLK_MSR_ID(82, "ge2d"),
>>   };
>>
>> -static struct meson_msr_id clk_msr_axg[CLK_MSR_MAX] = {
>> +static const struct meson_msr_id clk_msr_axg[] = {
>>       CLK_MSR_ID(0, "ring_osc_out_ee_0"),
>>       CLK_MSR_ID(1, "ring_osc_out_ee_1"),
>>       CLK_MSR_ID(2, "ring_osc_out_ee_2"),
>> @@ -242,7 +245,7 @@ static struct meson_msr_id 
>> clk_msr_axg[CLK_MSR_MAX] = {
>>       CLK_MSR_ID(109, "audio_locker_in"),
>>   };
>>
>> -static struct meson_msr_id clk_msr_g12a[CLK_MSR_MAX] = {
>> +static const struct meson_msr_id clk_msr_g12a[] = {
>>       CLK_MSR_ID(0, "ring_osc_out_ee_0"),
>>       CLK_MSR_ID(1, "ring_osc_out_ee_1"),
>>       CLK_MSR_ID(2, "ring_osc_out_ee_2"),
>> @@ -358,7 +361,7 @@ static struct meson_msr_id 
>> clk_msr_g12a[CLK_MSR_MAX] = {
>>       CLK_MSR_ID(122, "audio_pdm_dclk"),
>>   };
>>
>> -static struct meson_msr_id clk_msr_sm1[CLK_MSR_MAX] = {
>> +static const struct meson_msr_id clk_msr_sm1[] = {
>>       CLK_MSR_ID(0, "ring_osc_out_ee_0"),
>>       CLK_MSR_ID(1, "ring_osc_out_ee_1"),
>>       CLK_MSR_ID(2, "ring_osc_out_ee_2"),
>> @@ -489,7 +492,7 @@ static struct meson_msr_id 
>> clk_msr_sm1[CLK_MSR_MAX] = {
>>   };
>>
>>   static int meson_measure_id(struct meson_msr_id *clk_msr_id,
>> -                            unsigned int duration)
>> +                         unsigned int duration)
>>   {
>>       struct meson_msr *priv = clk_msr_id->priv;
>>       unsigned int val;
>> @@ -573,13 +576,14 @@ DEFINE_SHOW_ATTRIBUTE(clk_msr);
>>   static int clk_msr_summary_show(struct seq_file *s, void *data)
>>   {
>>       struct meson_msr_id *msr_table = s->private;
>> +     unsigned int msr_count = msr_table->priv->data.msr_count;
>>       unsigned int precision = 0;
>>       int val, i;
>>
>>       seq_puts(s, "  clock                     rate precision\n");
>>       seq_puts(s, "---------------------------------------------\n");
>>
>> -     for (i = 0 ; i < CLK_MSR_MAX ; ++i) {
>> +     for (i = 0 ; i < msr_count ; ++i) {
>>               if (!msr_table[i].name)
>>                       continue;
>>
>> @@ -604,7 +608,7 @@ static const struct regmap_config 
>> meson_clk_msr_regmap_config = {
>>
>>   static int meson_msr_probe(struct platform_device *pdev)
>>   {
>> -     const struct meson_msr_id *match_data;
>> +     const struct meson_msr_data *match_data;
>>       struct meson_msr *priv;
>>       struct dentry *root, *clks;
>>       void __iomem *base;
>> @@ -621,7 +625,16 @@ static int meson_msr_probe(struct 
>> platform_device *pdev)
>>               return -ENODEV;
>>       }
>>
>> -     memcpy(priv->msr_table, match_data, sizeof(priv->msr_table));
>> +     priv->data.msr_table = devm_kcalloc(&pdev->dev,
>> + match_data->msr_count,
>> +                                         sizeof(struct meson_msr_id),
>> +                                         GFP_KERNEL);
>> +     if (!priv->data.msr_table)
>> +             return -ENOMEM;
>> +
>> +     memcpy(priv->data.msr_table, match_data->msr_table,
>> +            match_data->msr_count * sizeof(struct meson_msr_id));
>> +     priv->data.msr_count = match_data->msr_count;
>>
>>       base = devm_platform_ioremap_resource(pdev, 0);
>>       if (IS_ERR(base))
>> @@ -636,45 +649,70 @@ static int meson_msr_probe(struct 
>> platform_device *pdev)
>>       clks = debugfs_create_dir("clks", root);
>>
>>       debugfs_create_file("measure_summary", 0444, root,
>> -                         priv->msr_table, &clk_msr_summary_fops);
>> +                         priv->data.msr_table, &clk_msr_summary_fops);
>>
>> -     for (i = 0 ; i < CLK_MSR_MAX ; ++i) {
>> -             if (!priv->msr_table[i].name)
>> +     for (i = 0 ; i < priv->data.msr_count ; ++i) {
>> +             if (!priv->data.msr_table[i].name)
>>                       continue;
>>
>> -             priv->msr_table[i].priv = priv;
>> +             priv->data.msr_table[i].priv = priv;
>>
>> -             debugfs_create_file(priv->msr_table[i].name, 0444, clks,
>> -                                 &priv->msr_table[i], &clk_msr_fops);
>> + debugfs_create_file(priv->data.msr_table[i].name, 0444, clks,
>> + &priv->data.msr_table[i], &clk_msr_fops);
>>       }
>>
>>       return 0;
>>   }
>>
>> +static const struct meson_msr_data clk_msr_gx_data = {
>> +     .msr_table = (void *)clk_msr_gx,
>> +     .msr_count = ARRAY_SIZE(clk_msr_gx),
>> +};
>> +
>> +static const struct meson_msr_data clk_msr_m8_data = {
>> +     .msr_table = (void *)clk_msr_m8,
>> +     .msr_count = ARRAY_SIZE(clk_msr_m8),
>> +};
>> +
>> +static const struct meson_msr_data clk_msr_axg_data = {
>> +     .msr_table = (void *)clk_msr_axg,
>> +     .msr_count = ARRAY_SIZE(clk_msr_axg),
>> +};
>> +
>> +static const struct meson_msr_data clk_msr_g12a_data = {
>> +     .msr_table = (void *)clk_msr_g12a,
>> +     .msr_count = ARRAY_SIZE(clk_msr_g12a),
>> +};
>> +
>> +static const struct meson_msr_data clk_msr_sm1_data = {
>> +     .msr_table = (void *)clk_msr_sm1,
>> +     .msr_count = ARRAY_SIZE(clk_msr_sm1),
>> +};
>> +
>>   static const struct of_device_id meson_msr_match_table[] = {
>>       {
>>               .compatible = "amlogic,meson-gx-clk-measure",
>> -             .data = (void *)clk_msr_gx,
>> +             .data = &clk_msr_gx_data,
>>       },
>>       {
>>               .compatible = "amlogic,meson8-clk-measure",
>> -             .data = (void *)clk_msr_m8,
>> +             .data = &clk_msr_m8_data,
>>       },
>>       {
>>               .compatible = "amlogic,meson8b-clk-measure",
>> -             .data = (void *)clk_msr_m8,
>> +             .data = &clk_msr_m8_data,
>>       },
>>       {
>>               .compatible = "amlogic,meson-axg-clk-measure",
>> -             .data = (void *)clk_msr_axg,
>> +             .data = &clk_msr_axg_data,
>>       },
>>       {
>>               .compatible = "amlogic,meson-g12a-clk-measure",
>> -             .data = (void *)clk_msr_g12a,
>> +             .data = &clk_msr_g12a_data,
>>       },
>>       {
>>               .compatible = "amlogic,meson-sm1-clk-measure",
>> -             .data = (void *)clk_msr_sm1,
>> +             .data = &clk_msr_sm1_data,
>>       },
>>       { /* sentinel */ }
>>   };
>>
>> ---
>> base-commit: 1e1fd26ed4ca05cc1f0e5857918da4dd54967f7d
>> change-id: 20250123-optimize_memory_size_of_clk_measure-f9c40e815794
>>
>> Best regards,
>
> Looks fine, thanks !!!
>
> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

  reply	other threads:[~2025-04-02  8:58 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-02-05  7:58 Chuan Liu via B4 Relay
2025-02-10  6:46 ` Chuan Liu
2025-02-10  9:50 ` Neil Armstrong
2025-04-02  8:50   ` Chuan Liu [this message]
2025-04-02  9:22     ` neil.armstrong
2025-04-03  8:49 ` Neil Armstrong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=57355917-8191-451e-b297-d5a9c50749d9@amlogic.com \
    --to=chuan.liu@amlogic.com \
    --cc=jbrunet@baylibre.com \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=martin.blumenstingl@googlemail.com \
    --cc=neil.armstrong@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®