From mboxrd@z Thu Jan 1 00:00:00 1970 From: hkallweit1@gmail.com (Heiner Kallweit) Date: Tue, 14 Feb 2017 21:05:59 +0100 Subject: [PATCH 02/18] mmc: meson-gx: remove code for unsupported CMD23 In-Reply-To: <420b75a9-b8c2-b3d7-ae60-3ed8a5a18ead@gmail.com> References: <420b75a9-b8c2-b3d7-ae60-3ed8a5a18ead@gmail.com> Message-ID: <642a46aa-416c-32a3-f9ef-3feafca72636@gmail.com> To: linus-amlogic@lists.infradead.org List-Id: linus-amlogic.lists.infradead.org CMD23 isn't supported on meson-gx and therefore the "set block count" command isn't used. So remove this dead code. Signed-off-by: Heiner Kallweit --- drivers/mmc/host/meson-gx-mmc.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c index 1ad66f84..e89bdf5f 100644 --- a/drivers/mmc/host/meson-gx-mmc.c +++ b/drivers/mmc/host/meson-gx-mmc.c @@ -555,11 +555,7 @@ static void meson_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) writel(0, host->regs + SD_EMMC_START); host->mrq = mrq; - - if (mrq->sbc) - meson_mmc_start_cmd(mmc, mrq->sbc); - else - meson_mmc_start_cmd(mmc, mrq->cmd); + meson_mmc_start_cmd(mmc, mrq->cmd); } static int meson_mmc_read_resp(struct mmc_host *mmc, struct mmc_command *cmd) @@ -690,7 +686,7 @@ static irqreturn_t meson_mmc_irq_thread(int irq, void *dev_id) } meson_mmc_read_resp(host->mmc, cmd); - if (!data || !data->stop || mrq->sbc) + if (!data || !data->stop) meson_mmc_request_done(host->mmc, mrq); else meson_mmc_start_cmd(host->mmc, data->stop); -- 2.11.1