From: hkallweit1@gmail.com (Heiner Kallweit)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH 15/18] mmc: meson-gx: improve initial configuration
Date: Tue, 14 Feb 2017 21:07:05 +0100 [thread overview]
Message-ID: <651c407e-bc38-5adc-a388-5a45854808e1@gmail.com> (raw)
In-Reply-To: <420b75a9-b8c2-b3d7-ae60-3ed8a5a18ead@gmail.com>
Config values which are not changed during runtime we can set
in the probe function already.
The block size setting is overwritten later in
meson_mmc_start_cmd anyway if needed, so it doesn't harm if we
remove this setting in meson_mmc_set_ios.
In addition:
- write config register only if configuration changed
- Initialize clocks after other config registers have been initialized
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
drivers/mmc/host/meson-gx-mmc.c | 37 +++++++++++++++++++++----------------
1 file changed, 21 insertions(+), 16 deletions(-)
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index 806554b1..25b46d36 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -385,15 +385,6 @@ static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
val &= ~(CFG_BUS_WIDTH_MASK << CFG_BUS_WIDTH_SHIFT);
val |= bus_width << CFG_BUS_WIDTH_SHIFT;
- val &= ~(CFG_BLK_LEN_MASK << CFG_BLK_LEN_SHIFT);
- val |= ilog2(SD_EMMC_CFG_BLK_SIZE) << CFG_BLK_LEN_SHIFT;
-
- val &= ~(CFG_RESP_TIMEOUT_MASK << CFG_RESP_TIMEOUT_SHIFT);
- val |= ilog2(SD_EMMC_CFG_RESP_TIMEOUT) << CFG_RESP_TIMEOUT_SHIFT;
-
- val &= ~(CFG_RC_CC_MASK << CFG_RC_CC_SHIFT);
- val |= ilog2(SD_EMMC_CFG_CMD_GAP) << CFG_RC_CC_SHIFT;
-
val &= ~CFG_DDR;
if (ios->timing == MMC_TIMING_UHS_DDR50 ||
ios->timing == MMC_TIMING_MMC_DDR52 ||
@@ -404,11 +395,11 @@ static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
if (ios->timing == MMC_TIMING_MMC_HS400)
val |= CFG_CHK_DS;
- writel(val, host->regs + SD_EMMC_CFG);
-
- if (val != orig)
+ if (val != orig) {
+ writel(val, host->regs + SD_EMMC_CFG);
dev_dbg(host->dev, "%s: SD_EMMC_CFG: 0x%08x -> 0x%08x\n",
__func__, orig, val);
+ }
}
static void meson_mmc_request_done(struct mmc_host *mmc,
@@ -675,6 +666,17 @@ static int meson_mmc_get_cd(struct mmc_host *mmc)
return status;
}
+static void meson_mmc_cfg_init(struct meson_host *host)
+{
+ u32 cfg = 0;
+
+ cfg |= ilog2(SD_EMMC_CFG_RESP_TIMEOUT) << CFG_RESP_TIMEOUT_SHIFT;
+ cfg |= ilog2(SD_EMMC_CFG_CMD_GAP) << CFG_RC_CC_SHIFT;
+ cfg |= ilog2(SD_EMMC_CFG_BLK_SIZE) << CFG_BLK_LEN_SHIFT;
+
+ writel(cfg, host->regs + SD_EMMC_CFG);
+}
+
static const struct mmc_host_ops meson_mmc_ops = {
.request = meson_mmc_request,
.set_ios = meson_mmc_set_ios,
@@ -735,10 +737,6 @@ static int meson_mmc_probe(struct platform_device *pdev)
if (ret)
goto free_host;
- ret = meson_mmc_clk_init(host);
- if (ret)
- goto free_host;
-
/* Stop execution */
writel(0, host->regs + SD_EMMC_START);
@@ -747,6 +745,13 @@ static int meson_mmc_probe(struct platform_device *pdev)
writel(IRQ_EN_MASK, host->regs + SD_EMMC_STATUS);
writel(IRQ_EN_MASK, host->regs + SD_EMMC_IRQ_EN);
+ /* set config to sane default */
+ meson_mmc_cfg_init(host);
+
+ ret = meson_mmc_clk_init(host);
+ if (ret)
+ goto free_host;
+
ret = devm_request_threaded_irq(&pdev->dev, irq, meson_mmc_irq,
meson_mmc_irq_thread, IRQF_SHARED,
dev_name(&pdev->dev), host);
--
2.11.1
next prev parent reply other threads:[~2017-02-14 20:07 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <420b75a9-b8c2-b3d7-ae60-3ed8a5a18ead@gmail.com>
2017-02-14 20:05 ` [PATCH 01/18] mmc: meson-gx: set segment host parameters Heiner Kallweit
2017-02-14 20:05 ` [PATCH 02/18] mmc: meson-gx: remove code for unsupported CMD23 Heiner Kallweit
2017-02-15 16:54 ` Kevin Hilman
2017-02-16 7:03 ` Heiner Kallweit
2017-02-16 8:14 ` Ulf Hansson
2017-02-16 17:49 ` Heiner Kallweit
2017-02-19 19:36 ` Heiner Kallweit
2017-02-14 20:06 ` [PATCH 03/18] mmc: meson-gx: explicitely call stop command for multi-block commands only Heiner Kallweit
2017-02-14 20:06 ` [PATCH 04/18] mmc: meson-gx: improve meson_mmc_start_cmd Heiner Kallweit
2017-02-15 17:04 ` Kevin Hilman
2017-02-15 19:43 ` Heiner Kallweit
2017-02-15 21:10 ` Heiner Kallweit
2017-02-15 23:58 ` Kevin Hilman
2017-02-19 19:41 ` Heiner Kallweit
2017-02-14 20:06 ` [PATCH 05/18] mmc: meson-gx: eliminate struct sd_emmc_data Heiner Kallweit
2017-02-15 17:09 ` Kevin Hilman
2017-02-14 20:06 ` [PATCH 06/18] mmc: meson-gx: simplify bounce buffer setting in meson_mmc_start_cmd Heiner Kallweit
2017-02-15 17:14 ` Kevin Hilman
2017-02-14 20:06 ` [PATCH 07/18] mmc: meson-gx: check return value of sg_copy_[from,to]_buffer Heiner Kallweit
2017-02-15 17:17 ` [PATCH 07/18] mmc: meson-gx: check return value of sg_copy_[from, to]_buffer Kevin Hilman
2017-02-14 20:06 ` [PATCH 08/18] mmc: meson-gx: make two functions return void Heiner Kallweit
2017-02-15 17:18 ` Kevin Hilman
2017-02-14 20:06 ` [PATCH 09/18] mmc: meson-gx: change interrupt name Heiner Kallweit
2017-02-15 12:34 ` Ben Dooks
2017-02-15 19:46 ` Heiner Kallweit
2017-02-15 17:18 ` Kevin Hilman
2017-02-14 20:06 ` [PATCH 10/18] mmc: meson-gx: remove unused members irq, ocr_mask from struct meson_host Heiner Kallweit
2017-02-15 17:19 ` Kevin Hilman
2017-02-14 20:06 ` [PATCH 11/18] mmc: meson-gx: remove unneeded variable in meson_mmc_clk_init Heiner Kallweit
2017-02-15 19:24 ` Kevin Hilman
2017-02-14 20:06 ` [PATCH 12/18] mmc: meson-gx: remove member parent_mux from struct meson_host Heiner Kallweit
2017-02-15 19:25 ` Kevin Hilman
2017-02-14 20:06 ` [PATCH 13/18] mmc: meson-gx: remove unneeded meson_mmc_clk_set in meson_mmc_clk_init Heiner Kallweit
2017-02-15 19:27 ` Kevin Hilman
2017-02-15 19:38 ` Heiner Kallweit
2017-02-15 23:56 ` Kevin Hilman
2017-02-16 7:05 ` Heiner Kallweit
2017-02-14 20:07 ` [PATCH 14/18] mmc: meson-gx: remove unneeded devm_kstrdup " Heiner Kallweit
2017-02-15 19:30 ` Kevin Hilman
2017-02-15 19:35 ` Heiner Kallweit
2017-02-14 20:07 ` Heiner Kallweit [this message]
2017-02-15 19:32 ` [PATCH 15/18] mmc: meson-gx: improve initial configuration Kevin Hilman
2017-02-14 20:07 ` [PATCH 16/18] mmc: meson-gx: improve response reading and sending stop command Heiner Kallweit
2017-02-15 19:34 ` Kevin Hilman
2017-02-14 20:07 ` [PATCH 17/18] mmc: meson-gx: remove member mrq from struct meson_host Heiner Kallweit
2017-02-15 19:36 ` Kevin Hilman
2017-02-14 20:07 ` [PATCH 18/18] mmc: meson-gx: move handling of one case from threaded handler to main irq Heiner Kallweit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=651c407e-bc38-5adc-a388-5a45854808e1@gmail.com \
--to=hkallweit1@gmail.com \
--cc=linus-amlogic@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®