mirror of https://lore.kernel.org/linux-amlogic/
 help / color / mirror / Atom feed
From: Neil Armstrong <neil.armstrong@linaro.org>
To: Anand Moon <linux.amoon@gmail.com>
Cc: linux-amlogic@lists.infradead.org,
	Matthias Kaehlcke <mka@chromium.org>,
	Alexander Stein <alexander.stein@ew.tq-group.com>,
	Johan Hovold <johan@kernel.org>
Subject: Re: [PATCH v3 0/9] Used onboard HUB to reset and add power to hub
Date: Sun, 22 Jan 2023 11:27:02 +0100	[thread overview]
Message-ID: <665b1349-531b-2c6b-8711-1300ecd42b7f@linaro.org> (raw)
In-Reply-To: <20230121175639.12818-1-linux.amoon@gmail.com>

Hi Anand,

Le 21/01/2023 à 18:56, Anand Moon a écrit :
> Amlogic board use gpio-hog to reset the USB hub.
> so using onboard hub we could reset the USB hub and
> also enable power to the USB hub.
> v3: Fix some small changes in $subject
>      address the input from Neil
>      fix the vialab device tree binding as per Krzysztof inputs.
> 
> v2: Odroid C1 / C2 : usb hub reset working as expected.
>      Odroid N2 : dropped usb hub changes, since my board USB hub
>                  is hitting regression.
>      Odroid C4 : Fix the device tree binding and used peer-hub for
>                  usb2.0 and usb3.0 hub.
> [1] https://lore.kernel.org/all/20230118044418.875-10-linux.amoon@gmail.com
> 
> v1: Odroid C1 / C2 : were not working as expected.
>      Odroid N2 : used single USB 3.0 hub reset.
>      Odroid C4 : used single USB 3.0 hub reset.
> 
> [0] https://patchwork.kernel.org/project/linux-amlogic/list/?series=707292
> 
> Any inputs for these changes ?

Most of the patches have been applied by Greg, so rebase this serie on
the lastest linux-next and send only the remaining patches.

Neil

> 
> Thanks
> -Anand
> 
> Anand Moon (9):
>    dt-bindings: usb: Add device id for Genesys Logic hub controller
>    ARM: dts: amlogic: Used onboard usb hub reset on odroid c1
>    arm64: dts: amlogic: Used onboard usb hub reset on odroid c2
>    usb: misc: onboard_usb_hub: add Genesys Logic GL852G hub support
>    vendor-prefixes: Add VIA Labs, Inc.
>    dt-bindings: usb: Add Via lab VL817 hub
>    arm64: dts: amlogic: Used onboard usb hub reset on odroid c4
>    usb: misc: onboard_usb_hub: add VIA LAB VL817 hub support
>    arm64: defconfig: Enable USB onboard HUB driver
> 
>   .../bindings/usb/genesys,gl850g.yaml          |  1 +
>   .../devicetree/bindings/usb/vialab,vl817.yaml | 71 +++++++++++++++++++
>   .../devicetree/bindings/vendor-prefixes.yaml  |  2 +
>   arch/arm/boot/dts/meson8b-odroidc1.dts        | 23 +++---
>   .../boot/dts/amlogic/meson-gxbb-odroidc2.dts  | 25 +++----
>   .../boot/dts/amlogic/meson-sm1-odroid-c4.dts  | 33 +++++----
>   arch/arm64/configs/defconfig                  |  1 +
>   drivers/usb/misc/onboard_usb_hub.c            |  4 ++
>   drivers/usb/misc/onboard_usb_hub.h            | 11 +++
>   9 files changed, 131 insertions(+), 40 deletions(-)
>   create mode 100644 Documentation/devicetree/bindings/usb/vialab,vl817.yaml
> 


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

  parent reply	other threads:[~2023-01-22 10:27 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-21 17:56 Anand Moon
2023-01-21 17:56 ` [PATCH v3 1/9] dt-bindings: usb: Add device id for Genesys Logic hub controller Anand Moon
2023-01-25 14:34   ` Greg Kroah-Hartman
2023-01-25 14:41     ` Anand Moon
2023-01-21 17:56 ` [PATCH v3 2/9] ARM: dts: amlogic: Used onboard usb hub reset on odroid c1 Anand Moon
2023-01-21 17:56 ` [PATCH v3 3/9] arm64: dts: amlogic: Used onboard usb hub reset on odroid c2 Anand Moon
2023-08-02 21:06   ` Ben Wolsieffer
2023-08-05 21:30     ` Krzysztof Kozlowski
2023-08-06  0:05       ` Ben Wolsieffer
2023-08-06  4:03         ` Anand Moon
2023-01-21 17:56 ` [PATCH v3 4/9] usb: misc: onboard_usb_hub: add Genesys Logic GL852G hub support Anand Moon
2023-01-21 17:56 ` [PATCH v3 5/9] vendor-prefixes: Add VIA Labs, Inc Anand Moon
2023-01-21 18:51   ` Krzysztof Kozlowski
2023-01-22  7:04     ` Anand Moon
2023-01-22  9:36       ` Krzysztof Kozlowski
2023-01-22 16:38         ` Anand Moon
2023-01-21 17:56 ` [PATCH v3 6/9] dt-bindings: usb: Add Via lab VL817 hub Anand Moon
2023-01-21 18:52   ` Krzysztof Kozlowski
2023-01-21 17:56 ` [PATCH v3 7/9] arm64: dts: amlogic: Used onboard usb hub reset on odroid c4 Anand Moon
2023-01-21 17:56 ` [PATCH v3 8/9] usb: misc: onboard_usb_hub: add VIA LAB VL817 hub support Anand Moon
2023-01-21 17:56 ` [PATCH v3 9/9] arm64: defconfig: Enable USB onboard HUB driver Anand Moon
2023-01-22 10:27 ` Neil Armstrong [this message]
2023-01-22 16:36   ` [PATCH v3 0/9] Used onboard HUB to reset and add power to hub Anand Moon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=665b1349-531b-2c6b-8711-1300ecd42b7f@linaro.org \
    --to=neil.armstrong@linaro.org \
    --cc=alexander.stein@ew.tq-group.com \
    --cc=johan@kernel.org \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux.amoon@gmail.com \
    --cc=mka@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®