From mboxrd@z Thu Jan 1 00:00:00 1970 From: afaerber@suse.de (=?UTF-8?Q?Andreas_F=c3=a4rber?=) Date: Mon, 11 Jul 2016 23:38:28 +0200 Subject: [U-Boot] [PATCH v7 0/4] Amlogic Meson GXBaby and ODROID-C2 support In-Reply-To: References: <1462689017-3160-1-git-send-email-b.galvani@gmail.com> <57831945.2040009@suse.de> <20160711194858.GA12930@gmail.com> <5783FE7A.9070400@suse.de> Message-ID: <7b67ed3e-59cc-c89c-c6dc-71867884736c@suse.de> To: linus-amlogic@lists.infradead.org List-Id: linus-amlogic.lists.infradead.org Am 11.07.2016 um 22:36 schrieb Carlo Caione: > On Mon, Jul 11, 2016 at 10:15 PM, Andreas F?rber wrote: >> [...] >> NOTICE: BL3-1: v1.0(debug):4d2e34d >> NOTICE: BL3-1: Built : 17:08:35, Oct 29 2015 >> INFO: BL3-1: Initializing runtime services >> INFO: BL3-1: Preparing for EL3 exit to normal world >> INFO: BL3-1: Next image address = 0x1000000 >> INFO: BL3-1: Next image spsr = 0x3c9 >> No match for driver 'eth_designware' >> Some drivers were not found >> >> >> U-Boot 2016.07-00001-g10a9e48 (Jul 11 2016 - 21:58:13 +0200) odroid-c2 >> >> DRAM: 2 GiB >> No maUsing default environment >> >> In: serial at 4c0 >> Out: serial at 4c0 >> Err: serial at 4c0 >> Net: No ethernet found. >> => >> >> The eth_designware line (twice, if counting "No ma") is due to what Tom >> mentioned wrt DM GPIO, I guess. >> >> Shouldn't we get a version line from SPL, too? A serial driver issue? > > AFAIKT there is no SPL. U-Boot is loaded by BL3-1 also in the U-Boot > shipped by amlogic. You're right, Hardkernel's version is without SPL, too. Still I wonder about that "No ma" (after the DRAM line). Regards, Andreas -- SUSE Linux GmbH, Maxfeldstr. 5, 90409 N?rnberg, Germany GF: Felix Imend?rffer, Jane Smithard, Graham Norton HRB 21284 (AG N?rnberg)