Re: [PATCH 1/1] usb: dwc2: disable power_down on Amlogic devices

From: Brad Harper <bjharper@gmail.com>
To: Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
	linux-usb@vger.kernel.org, hminas@synopsys.com,
	gregkh@linuxfoundation.org
Cc: Arthur.Petrosyan@synopsys.com, christianshewitt@gmail.com,
	linux-kernel@vger.kernel.org, stable@vger.kernel.org,
	linux-amlogic@lists.infradead.org
Subject: Re: [PATCH 1/1] usb: dwc2: disable power_down on Amlogic devices
Date: Tue, 11 Dec 2018 00:20:41 +1100	[thread overview]
Message-ID: <81fb7231-8bc1-c8e9-4901-20676632a10b@gmail.com> (raw)
In-Reply-To: <20181209190129.11870-2-martin.blumenstingl@googlemail.com>

On 10/12/2018 6:01 am, Martin Blumenstingl wrote:
> Disable power_down by setting the parameter to
> DWC2_POWER_DOWN_PARAM_NONE. This fixes a problem on various Amlogic
> Meson SoCs where USB devices are only recognized when plugged in before
> booting Linux. A hot-plugged USB device was not detected even though the
> device got power (my USB thumb drive for example has an LED which lit
> up).
> 
> A similar fix was implemented for Rockchip SoCs in commit c216765d3a1def
> ("usb: dwc2: disable power_down on rockchip devices"). That commit
> suggests that a change in the dwc2 driver is the cause because the
> default value for the "hibernate" parameter (which then got renamed to
> "power_down" to support other modes) was changed in the v4.17 merge
> window with:
> commit 6d23ee9caa6790 ("Merge tag 'usb-for-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-testing").
> 
> Cc: <stable@vger.kernel.org> # 4.19
> Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

Fixed the issue on the Odroid C2 sbc with amlogic meson gxbb soc, 
devices are now detected when connected after boot

Tested-by: Brad Harper <bjharper@gmail.com>

> ---
>   drivers/usb/dwc2/params.c | 1 +
>   1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c
> index 7c1b6938f212..38c813b1d203 100644
> --- a/drivers/usb/dwc2/params.c
> +++ b/drivers/usb/dwc2/params.c
> @@ -111,6 +111,7 @@ static void dwc2_set_amlogic_params(struct dwc2_hsotg *hsotg)
>   	p->phy_type = DWC2_PHY_TYPE_PARAM_UTMI;
>   	p->ahbcfg = GAHBCFG_HBSTLEN_INCR8 <<
>   		GAHBCFG_HBSTLEN_SHIFT;
> +	p->power_down = DWC2_POWER_DOWN_PARAM_NONE;
>   }
>   
>   static void dwc2_set_amcc_params(struct dwc2_hsotg *hsotg)
> 


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic