mirror of https://lore.kernel.org/linux-amlogic/
 help / color / mirror / Atom feed
From: yixun.lan@amlogic.com (Yixun Lan)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH v2 3/5] ARM64: dts: meson-axg: uart: Add the pinctrl info description
Date: Mon, 8 Jan 2018 14:44:25 +0800	[thread overview]
Message-ID: <882732bb-952c-ca90-1776-a9da294456f6@amlogic.com> (raw)
In-Reply-To: <b2571e30-d543-9288-68cf-1af86bb5f4bc@amlogic.com>

HI Martin:

On 01/08/18 14:07, Yixun Lan wrote:
> Hi Martin
> 
> On 01/08/18 04:19, Martin Blumenstingl wrote:
>> Hi Yixun,
>>
>> On Sat, Jan 6, 2018 at 1:10 AM, Yixun Lan <yixun.lan@amlogic.com> wrote:
>>> Describe the pinctrl info for the UART controller which is found
>>> in the Meson-AXG SoCs.
>>>
>>> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
>>> ---
>>>  arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 97 ++++++++++++++++++++++++++++++
>>>  1 file changed, 97 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
>>> index 644d0f9eaf8c..1eb45781c850 100644
>>> --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
>>> +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
>>> @@ -448,6 +448,70 @@
>>>                                                 function = "spi1";
>>>                                         };

.

>>>
>>> +
>> did you add this additional newline on purpose?
oops, this is added by mistake..
thanks for catching this, I will fix it

>>>                                 remote_input_ao_pins: remote_input_ao {
>>>                                         mux {
>>>                                                 groups = "remote_input_ao";
>>>                                                 function = "remote_input_ao";
>>>                                         };
>>>                                 };
>>> +
>>> +                               uart_ao_a_pins: uart_ao_a {
>>> +                                       mux {
>>> +                                               groups = "uart_ao_tx_a",
>>> +                                                       "uart_ao_rx_a";
>>> +                                               function = "uart_ao_a";
>>> +                                       };
>>> +                               };
>>> +
>>> +                               uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
>>> +                                       mux {
>>> +                                               groups = "uart_ao_cts_a",
>>> +                                                       "uart_ao_rts_a";
>>> +                                               function = "uart_ao_a";
>>> +                                       };
>>> +                               };
>>> +
>>> +                               uart_ao_b_pins: uart_ao_b {
>>> +                                       mux {
>>> +                                               groups = "uart_ao_tx_b",
>>> +                                                       "uart_ao_rx_b";
>>> +                                               function = "uart_ao_b";
>>> +                                       };
>>> +                               };
>>> +
>>> +                               uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
>>> +                                       mux {
>>> +                                               groups = "uart_ao_cts_b",
>>> +                                                       "uart_ao_rts_b";
>>> +                                               function = "uart_ao_b";
>>> +                                       };
>>> +                               };
>>>                         };
>>>
>>>                         pwm_AO_ab: pwm at 7000 {
>>> --
>>> 2.15.1
>>>
>>>
>>> _______________________________________________
>>> linux-amlogic mailing list
>>> linux-amlogic at lists.infradead.org
>>> http://lists.infradead.org/mailman/listinfo/linux-amlogic
>>
>> Regards
>> Martin
>>
>> .
>>
> .
> 

  reply	other threads:[~2018-01-08  6:44 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-06  0:10 [PATCH v2 0/5] ARM64: dts: meson-axg: UART DT updates Yixun Lan
2018-01-06  0:10 ` [PATCH v2 1/5] ARM64: dts: meson: uart: fix address space range Yixun Lan
2018-01-08  8:54   ` Jerome Brunet
2018-01-06  0:10 ` [PATCH v2 2/5] ARM64: dts: meson-axg: uart: drop legacy compatible name from EE UART Yixun Lan
2018-01-08  8:56   ` Jerome Brunet
2018-01-06  0:10 ` [PATCH v2 3/5] ARM64: dts: meson-axg: uart: Add the pinctrl info description Yixun Lan
2018-01-07 20:19   ` Martin Blumenstingl
2018-01-08  6:07     ` Yixun Lan
2018-01-08  6:44       ` Yixun Lan [this message]
2018-01-08  8:42       ` Jerome Brunet
2018-01-06  0:10 ` [PATCH v2 4/5] ARM64: dts: meson-axg: complete the pinctrl info for UART_AO_A Yixun Lan
2018-01-06  0:10 ` [PATCH v2 5/5] ARM64: dts: meson-axg: enable the UART_A controller Yixun Lan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=882732bb-952c-ca90-1776-a9da294456f6@amlogic.com \
    --to=yixun.lan@amlogic.com \
    --cc=linus-amlogic@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®