[PATCH 0/2] Meson8b: fixes for the cpu_scale_div clock

[narmstrong@baylibre.com (Neil Armstrong)]

On 08/11/2018 15:16, Neil Armstrong wrote:
> On 27/09/2018 10:59, Martin Blumenstingl wrote:
>> While trying to add support for the TWD timer I found that our CPU clock
>> calculation (when running off the "cpu_scale_div clock) is incorrect.
>>
>> The main problem was the cpu_scale_div clock:
>> it's divider table has an off-by-one error. the old formula was:
>>   parent_rate / 2 * register_value
>> however, testing shows that the correct formula is:
>>   parent_rate / 2 * (register value + 1)
>> See the commit message of patch #1 for a complete description of the
>> problem and it's history.
>>
>> While looking at the "cpu_scale_div" clock I also found that it's
>> register width was also off-by-one, so this is fixed in a separate patch
>> as well.
>>
>> Both patches are not critical because I haven't seen a case where u-boot
>> uses cpu_scale_div for the CPU clock. It's only a problem when playing
>> with the CPU clock in u-boot (by writing registers manually) or as soon
>> as we support CPU frequency scaling.
>>
>>
>> Martin Blumenstingl (2):
>>   clk: meson: meson8b: fix incorrect divider mapping in cpu_scale_table
>>   clk: meson: meson8b: fix the width of the cpu_scale_div clock
>>
>>  drivers/clk/meson/meson8b.c | 17 +++++++++--------
>>  1 file changed, 9 insertions(+), 8 deletions(-)
>>
> 
> Pushed to fixes/drivers for 4.20
> 
> Neil
> 

Finally, pushed to next/drivers to since these are not critical and to
satisfy the dependencies of "Meson8b: make the CPU clock mutable" patchset.