[PATCH v4 1/2] dt-bindings: nand: meson: add Amlogic NAND controller driver

[liang.yang@amlogic.com (Liang Yang)]

On 9/28/2018 2:16 AM, Rob Herring wrote:
> On Thu, Sep 20, 2018 at 04:50:48PM +0800, Jianxin Pan wrote:
>> From: Liang Yang <liang.yang@amlogic.com>
>>
>> Add Amlogic NAND controller dt-bindings for Meson SoC,
>> Current this driver support GXBB/GXL/AXG platform.
>>
>> Signed-off-by: Liang Yang <liang.yang@amlogic.com>
>> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
>> ---
>>   .../devicetree/bindings/mtd/amlogic,meson-nand.txt | 60 ++++++++++++++++++++++
>>   1 file changed, 60 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
>>
>> diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
>> new file mode 100644
>> index 0000000..803df2a
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
>> @@ -0,0 +1,60 @@
>> +Amlogic NAND Flash Controller (NFC) for GXBB/GXL/AXG family SoCs
>> +
>> +This file documents the properties in addition to those available in
>> +the MTD NAND bindings.
>> +
>> +Required properties:
>> +- compatible : contains one of:
>> +  - "amlogic,meson-gxl-nfc"
>> +  - "amlogic,meson-axg-nfc"
>> +- clocks     :
>> +	A list of phandle + clock-specifier pairs for the clocks listed
>> +	in clock-names.
>> +
>> +- clock-names: Should contain the following:
>> +	"core" - NFC module gate clock
>> +	"device" - device clock from eMMC sub clock controller
>> +
>> +- amlogic,mmc-syscon	: Required for NAND clocks, it's shared with SD/eMMC
>> +				controller port C
>> +
>> +Optional children nodes:
>> +Children nodes represent the available nand chips.
>> +
>> +Other properties:
>> +see Documentation/devicetree/bindings/mtd/nand.txt for generic bindings.
>> +
>> +Example demonstrate on AXG SoC:
>> +
>> +	sd_emmc_c_clkc: mmc at 7000 {
>> +		compatible = "amlogic,meson-axg-mmc-clkc", "syscon";
>> +		reg = <0x0 0x7000 0x0 0x800>;
>> +		status = "okay";
>> +	};
>> +
>> +	nand: nfc at 7800 {
> 
> nand-controller at 7800
> 
ok, i will fix it.

>> +		compatible = "amlogic,meson-axg-nfc";
>> +		reg = <0x0 0x7800 0x0 0x100>;
>> +		#address-cells = <1>;
>> +		#size-cells = <0>;
>> +		interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
>> +		status = "disabled";
>> +
>> +		clocks = <&clkc CLKID_SD_EMMC_C>,
>> +			<&sd_emmc_c_clkc CLKID_MMC_DIV>;
>> +		clock-names = "core", "device";
>> +		amlogic,mmc-syscon = <&sd_emmc_c_clkc>;
>> +
>> +		status = "okay";
> 
> Don't show status in examples, plus you have it twice.
> 
ok, i will fix it.
>> +
>> +		pinctrl-names = "default";
>> +		pinctrl-0 = <&nand_pins>;
>> +
>> +		nand at 0 {
>> +			reg = <0>;
>> +			#address-cells = <1>;
>> +			#size-cells = <1>;
>> +
>> +			nand-on-flash-bbt;
>> +		};
>> +	};
>> -- 
>> 1.9.1
>>
> 
> .
>