From mboxrd@z Thu Jan 1 00:00:00 1970 From: balbes-150@yandex.ru (Oleg) Date: Mon, 15 May 2017 15:12:57 +0300 Subject: S805/S812 Device Tree upstreaming (was: Testing.) In-Reply-To: References: Message-ID: <939ef72d-a4e5-7535-2252-d607158bd0fe@yandex.ru> To: linus-amlogic@lists.infradead.org List-Id: linus-amlogic.lists.infradead.org > get a copy of: > - dmesg output > - /sys/kernel/debug/gpio > - /proc/interrupts > - /proc/iomem I received the necessary data from LebreELEC (this system now I have eMMC). Let me know if you need to receive this data always from Android. https://yadi.sk/d/deis2Z023JAiyE > > I'm using an initrd from Arch Linux ARM (from their ARMv7 multi-platform image). > however, I found another missing kernel config option yesterday: you > also need to enable CONFIG_COMMON_CLK_PWM > once you enable that you should be able to see /dev/mmcblk1p[0-9] with > all the partitions from your SD card > > I was also able to reproduce the kernel crash you reported last week. > it seems to go away when enabling CONFIG_DEBUG_SPINLOCK in the kernel > config - but I will create a separate thread about this (as I suspect > that there may be some memory corruption along with a race condition > somewhere) > > > Regards, > Martin Hi Martin Good news. Using the sources Your latest kernel (20170513) and amendments in the config of the kernel I was able to run on Tronsmart MXIII Plus (s812). By the way, in the source for Your kernel I had to make one small change to comment out the in /arch/arm/mach-meson/Makefile a build of platsmp. Thanks for the support. Now I have the ability to run basic system on the device and test will be easier.