Re: [PATCH 1/2] dt-bindings: display: amlogic, meson-vpu: exclusively use amlogic,canvas

[Neil Armstrong <narmstrong@baylibre.com>]

On 11/03/2019 11:51, Maxime Jourdan wrote:
> When the DRM driver for the meson platform was created, the bindings
> required that the DMC register region was provided.
> 
> Through those DMC registers, the display driver could configure an IP
> called "canvas", a video lookup table used by the display IP.
> 
> It was later discovered that "canvas" is actually an IP shared by other
> components than display: video decoder, 2D engine.. and that it wasn't
> possible to keep the canvas code in DRM.
> 
> Over the past few months, incremental efforts have been deployed to
> create a standalone meson-canvas driver [1], and the DRM driver was
> patched to optionally use it if present [2].
> 
> This is the final step of those efforts where we simply remove any
> control over DMC that the meson DRM driver has.
> 
> Please note that this breaks compatibility with older DTs that only
> provide the DMC register range but not the amlogic,canvas node.
> 
> [1] https://patchwork.kernel.org/cover/10573771/
> [2] https://patchwork.freedesktop.org/series/52076/
> 
> Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
> ---
>  .../devicetree/bindings/display/amlogic,meson-vpu.txt        | 5 ++---
>  1 file changed, 2 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt
> index c65fd7a7467c..419444e2b4d3 100644
> --- a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt
> +++ b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt
> @@ -60,15 +60,14 @@ Required properties:
>  - reg: base address and size of he following memory-mapped regions :
>  	- vpu
>  	- hhi
> -	- dmc
>  - reg-names: should contain the names of the previous memory regions
>  - interrupts: should contain the VENC Vsync interrupt number
> +- amlogic,canvas: phandle to canvas provider node as described in the file
> +	../soc/amlogic/amlogic,canvas.txt
>  
>  Optional properties:
>  - power-domains: Optional phandle to associated power domain as described in
>  	the file ../power/power_domain.txt
> -- amlogic,canvas: phandle to canvas provider node as described in the file
> -	../soc/amlogic/amlogic,canvas.txt
>  
>  Required nodes:
>  
> 


Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic