From: narmstrong@baylibre.com (Neil Armstrong)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH v4 1/6] drm: bridge: dw-hdmi: Extract PHY interrupt setup to a function
Date: Tue, 28 Mar 2017 15:34:17 +0200 [thread overview]
Message-ID: <98e06589-8eb3-e7b8-646a-8099f1de51b0@baylibre.com> (raw)
In-Reply-To: <b8b3caca-d086-b390-a2fc-ef998e61e755@synopsys.com>
On 03/22/2017 02:53 PM, Jose Abreu wrote:
> Hi Neil,
>
>
> On 21-03-2017 15:12, Neil Armstrong wrote:
>> From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
>>
>> In preparation for adding PHY operations to handle RX SENSE and HPD,
>> group all the PHY interrupt setup code in a single location and extract
>> it to a separate function.
>>
>> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>
> Reviewed-by: Jose Abreu <joabreu@synopsys.com>
>
> Maybe if you submit a next version we could get rid of
> "dw_hdmi_fb_registered" totally and move the remaining setup code
> to a new "dw_hdmi_setup_i2c" function.
Ok I'll do this,
Neil
>
> Best regards,
> Jose Miguel Abreu
>
>> ---
>> drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 50 ++++++++++++++-----------------
>> 1 file changed, 23 insertions(+), 27 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
>> index af93f7a..f82750a 100644
>> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
>> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
>> @@ -1559,7 +1559,7 @@ static int dw_hdmi_setup(struct dw_hdmi *hdmi, struct drm_display_mode *mode)
>> }
>>
>> /* Wait until we are registered to enable interrupts */
>> -static int dw_hdmi_fb_registered(struct dw_hdmi *hdmi)
>> +static void dw_hdmi_fb_registered(struct dw_hdmi *hdmi)
>> {
>> hdmi_writeb(hdmi, HDMI_PHY_I2CM_INT_ADDR_DONE_POL,
>> HDMI_PHY_I2CM_INT_ADDR);
>> @@ -1567,15 +1567,6 @@ static int dw_hdmi_fb_registered(struct dw_hdmi *hdmi)
>> hdmi_writeb(hdmi, HDMI_PHY_I2CM_CTLINT_ADDR_NAC_POL |
>> HDMI_PHY_I2CM_CTLINT_ADDR_ARBITRATION_POL,
>> HDMI_PHY_I2CM_CTLINT_ADDR);
>> -
>> - /* enable cable hot plug irq */
>> - hdmi_writeb(hdmi, hdmi->phy_mask, HDMI_PHY_MASK0);
>> -
>> - /* Clear Hotplug interrupts */
>> - hdmi_writeb(hdmi, HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE,
>> - HDMI_IH_PHY_STAT0);
>> -
>> - return 0;
>> }
>>
>> static void initialize_hdmi_ih_mutes(struct dw_hdmi *hdmi)
>> @@ -1693,6 +1684,26 @@ static void dw_hdmi_update_phy_mask(struct dw_hdmi *hdmi)
>> hdmi_writeb(hdmi, hdmi->phy_mask, HDMI_PHY_MASK0);
>> }
>>
>> +static void dw_hdmi_phy_setup_hpd(struct dw_hdmi *hdmi)
>> +{
>> + /*
>> + * Configure the PHY RX SENSE and HPD interrupts polarities and clear
>> + * any pending interrupt.
>> + */
>> + hdmi_writeb(hdmi, HDMI_PHY_HPD | HDMI_PHY_RX_SENSE, HDMI_PHY_POL0);
>> + hdmi_writeb(hdmi, HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE,
>> + HDMI_IH_PHY_STAT0);
>> +
>> + /* Enable cable hot plug irq. */
>> + hdmi_writeb(hdmi, hdmi->phy_mask, HDMI_PHY_MASK0);
>> +
>> + /* Clear and unmute interrupts. */
>> + hdmi_writeb(hdmi, HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE,
>> + HDMI_IH_PHY_STAT0);
>> + hdmi_writeb(hdmi, ~(HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE),
>> + HDMI_IH_MUTE_PHY_STAT0);
>> +}
>> +
>> static enum drm_connector_status
>> dw_hdmi_connector_detect(struct drm_connector *connector, bool force)
>> {
>> @@ -2204,29 +2215,14 @@ static int dw_hdmi_detect_phy(struct dw_hdmi *hdmi)
>> hdmi->ddc = NULL;
>> }
>>
>> - /*
>> - * Configure registers related to HDMI interrupt
>> - * generation before registering IRQ.
>> - */
>> - hdmi_writeb(hdmi, HDMI_PHY_HPD | HDMI_PHY_RX_SENSE, HDMI_PHY_POL0);
>> -
>> - /* Clear Hotplug interrupts */
>> - hdmi_writeb(hdmi, HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE,
>> - HDMI_IH_PHY_STAT0);
>> -
>> hdmi->bridge.driver_private = hdmi;
>> hdmi->bridge.funcs = &dw_hdmi_bridge_funcs;
>> #ifdef CONFIG_OF
>> hdmi->bridge.of_node = pdev->dev.of_node;
>> #endif
>>
>> - ret = dw_hdmi_fb_registered(hdmi);
>> - if (ret)
>> - goto err_iahb;
>> -
>> - /* Unmute interrupts */
>> - hdmi_writeb(hdmi, ~(HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE),
>> - HDMI_IH_MUTE_PHY_STAT0);
>> + dw_hdmi_fb_registered(hdmi);
>> + dw_hdmi_phy_setup_hpd(hdmi);
>>
>> memset(&pdevinfo, 0, sizeof(pdevinfo));
>> pdevinfo.parent = dev;
>
next prev parent reply other threads:[~2017-03-28 13:34 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-21 15:12 [PATCH v4 0/6] drm: bridge: dw-hdmi: Add support for Custom PHYs Neil Armstrong
2017-03-21 15:12 ` [PATCH v4 1/6] drm: bridge: dw-hdmi: Extract PHY interrupt setup to a function Neil Armstrong
2017-03-22 13:53 ` Jose Abreu
2017-03-28 13:34 ` Neil Armstrong [this message]
2017-03-21 15:12 ` [PATCH v4 2/6] media: uapi: Add RGB and YUV bus formats for Synopsys HDMI TX Controller Neil Armstrong
2017-03-22 13:54 ` Jose Abreu
2017-03-21 15:12 ` [PATCH v4 3/6] documentation: media: Add documentation for new RGB and YUV bus formats Neil Armstrong
2017-03-21 15:12 ` [PATCH v4 4/6] drm: bridge: dw-hdmi: Switch to V4L bus format and encodings Neil Armstrong
2017-03-22 16:08 ` Jose Abreu
2017-03-22 16:09 ` Neil Armstrong
2017-03-22 16:21 ` Philipp Zabel
2017-03-22 16:33 ` Neil Armstrong
2017-03-21 15:12 ` [PATCH v4 5/6] drm: bridge: dw-hdmi: Add Documentation on supported input formats Neil Armstrong
2017-03-21 15:12 ` [PATCH v4 6/6] drm: bridge: dw-hdmi: Move HPD handling to PHY operations Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=98e06589-8eb3-e7b8-646a-8099f1de51b0@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=linus-amlogic@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®