Re: [PATCH v5 0/9] reset: amlogic: move audio reset drivers out of CCF

[Philipp Zabel <p.zabel@pengutronix.de>]

On Di, 2024-09-10 at 18:32 +0200, Jerome Brunet wrote:
> This patchset follows the discussion about having reset driver in the
> clock tree [1]. Ideally those should reside in the reset part of tree.
> 
> Also the code of the amlogic reset driver is very similar between the 2
> trees and could use the same driver code.
> 
> This patcheset alignes the reset drivers present in the reset and clock
> then adds support for the reset driver of audio clock controller found in
> the g12 and sm1 SoC family to the reset tree, using the auxiliary bus.
> 
> The infrastructure put in place is meant to be generic enough so we may
> eventually also move the reset drivers in the meson8b and aoclk clock
> controllers.
> 
> This was tested on sm1 vim3l and gxl aml-s905x-cc.
> 
> Changes since v4 [6]:
>  * Fix Kconfig depends and select as reported by Philipp and
>    and 0-day robot.
> 
> Changes since v3 [5]:
>  * Drop pltf/platform as suggested
> 
> Changes since v2 [4]:
>  * Fix undefined read access of the reset register
>  * Fix Kconfig symbol description
> 
> Changes since v1 [3]:
>  * Fixes formatting errors reported by Stephen.
>  * Changed parameters type to unsigned
>  * Fix usage of ops passed as parameters, previously ignored.
>  * Return 0 instead of an error if reset support is absent
>    to properly decouple from the clock and have a weak
>    dependency
>  * Split the platform and auxiliary modules in 2 distinct modules
>    to fix the COMPILE_TEST error reported by ktest robot.
> 
> Change since RFC [2]:
>  * Move the aux registration helper out of clock too.

Thank you,

Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>

regards
Philipp

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic