From mboxrd@z Thu Jan 1 00:00:00 1970 From: martin.blumenstingl@googlemail.com (Martin Blumenstingl) Date: Sat, 3 Dec 2016 00:52:14 +0100 Subject: [PATCH v2 0/7] stmmac: dwmac-meson8b: configurable RGMII TX delay In-Reply-To: <20161127.203324.1634866862730391239.davem@davemloft.net> References: <20161124143417.10178-1-martin.blumenstingl@googlemail.com> <20161125130156.17879-1-martin.blumenstingl@googlemail.com> <20161127.203324.1634866862730391239.davem@davemloft.net> Message-ID: To: linus-amlogic@lists.infradead.org List-Id: linus-amlogic.lists.infradead.org On Mon, Nov 28, 2016 at 2:33 AM, David Miller wrote: > From: Martin Blumenstingl > Date: Fri, 25 Nov 2016 14:01:49 +0100 > >> Currently the dwmac-meson8b stmmac glue driver uses a hardcoded 1/4 >> cycle TX clock delay. This seems to work fine for many boards (for >> example Odroid-C2 or Amlogic's reference boards) but there are some >> others where TX traffic is simply broken. >> There are probably multiple reasons why it's working on some boards >> while it's broken on others: >> - some of Amlogic's reference boards are using a Micrel PHY >> - hardware circuit design >> - maybe more... > > The ARM arch file changes do not apply cleanly to net-next, you probably > want to merge them via the ARM tree instead of mine, and respin this series > to be without the .dts file changes. done, v3 contains only the net-next changes while the dts changes can be found here: [0] Regards, Martin [0] http://lists.infradead.org/pipermail/linux-amlogic/2016-December/001836.html