mirror of https://lore.kernel.org/linux-amlogic/
 help / color / mirror / Atom feed
From: narmstrong@baylibre.com (Neil Armstrong)
To: linus-amlogic@lists.infradead.org
Subject: [U-Boot] [PATCH v2 u-boot 1/2] reset: Add get/assert/deassert/release for bulk of reset signals
Date: Thu, 12 Apr 2018 10:14:57 +0200	[thread overview]
Message-ID: <b1c6ae2c-c948-f309-7b11-368973a4249b@baylibre.com> (raw)
In-Reply-To: <9998be38-4919-f857-f12e-ac6b77e6e6bf@ti.com>

On 11/04/2018 17:49, Jean-Jacques Hiblot wrote:
> Hi Neil,
> 
> while trying to test your patches on dwc3, I ran into a compilation issue.
> 
> On 03/04/2018 11:40, Neil Armstrong wrote:
>> This patch adds a "bulk" API to the reset API in order to get/deassert/
>> assert/release a group of reset signals associated with a device.
>>
>> This bulk API will avoid adding a copy of the same code to manage
>> a group of reset signals in drivers.
>>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>> ---
>> ? drivers/reset/reset-uclass.c | 60 +++++++++++++++++++++++++++
>> ? include/reset.h????????????? | 99 ++++++++++++++++++++++++++++++++++++++++++++
>> ? 2 files changed, 159 insertions(+)
>>
>> diff --git a/drivers/reset/reset-uclass.c b/drivers/reset/reset-uclass.c
>> index 307a297..9a5c9c9 100644
>> --- a/drivers/reset/reset-uclass.c
>> +++ b/drivers/reset/reset-uclass.c
>> @@ -81,6 +81,40 @@ int reset_get_by_index(struct udevice *dev, int index,
>> ????? return 0;
>> ? }
>> ? +int reset_get_bulk(struct udevice *dev, struct reset_ctl_bulk *bulk)
>> +{
>> +??? int i, ret, err, count;
>> +???
>> +??? bulk->count = 0;
>> +
>> +??? count = dev_count_phandle_with_args(dev, "resets", "#reset-cells");
>> +??? if (!count)
>> +??????? return 0;
>> +
>> +??? bulk->resets = devm_kcalloc(dev, count, sizeof(struct reset_ctl),
>> +??????????????????? GFP_KERNEL);
>> +??? if (!bulk->resets)
>> +??????? return -ENOMEM;
>> +
>> +??? for (i = 0; i < count; i++) {
>> +??????? ret = reset_get_by_index(dev, i, &bulk->resets[i]);
>> +??????? if (ret < 0)
>> +??????????? goto bulk_get_err;
>> +
>> +??????? ++bulk->count;
>> +??? }
>> +
>> +??? return 0;
>> +
>> +bulk_get_err:
>> +??? err = reset_release_all(bulk->resets, bulk->count);
>> +??? if (err)
>> +??????? debug("%s: could release all resets for %p\n",
>> +????????????? __func__, dev);
>> +
>> +??? return ret;
>> +}
>> +
>> ? int reset_get_by_name(struct udevice *dev, const char *name,
>> ?????????????? struct reset_ctl *reset_ctl)
>> ? {
>> @@ -126,6 +160,19 @@ int reset_assert(struct reset_ctl *reset_ctl)
>> ????? return ops->rst_assert(reset_ctl);
>> ? }
>> ? +int reset_assert_bulk(struct reset_ctl_bulk *bulk)
>> +{
>> +??? int i, ret;
>> +
>> +??? for (i = 0; i < bulk->count; i++) {
>> +??????? ret = reset_assert(&bulk->resets[i]);
>> +??????? if (ret < 0)
>> +??????????? return ret;
>> +??? }
>> +
>> +??? return 0;
>> +}
>> +
>> ? int reset_deassert(struct reset_ctl *reset_ctl)
>> ? {
>> ????? struct reset_ops *ops = reset_dev_ops(reset_ctl->dev);
>> @@ -135,6 +182,19 @@ int reset_deassert(struct reset_ctl *reset_ctl)
>> ????? return ops->rst_deassert(reset_ctl);
>> ? }
>> ? +int reset_deassert_bulk(struct reset_ctl_bulk *bulk)
>> +{
>> +??? int i, ret;
>> +
>> +??? for (i = 0; i < bulk->count; i++) {
>> +??????? ret = reset_deassert(&bulk->resets[i]);
>> +??????? if (ret < 0)
>> +??????????? return ret;
>> +??? }
>> +
>> +??? return 0;
>> +}
>> +
>> ? int reset_release_all(struct reset_ctl *reset_ctl, int count)
>> ? {
>> ????? int i, ret;
>> diff --git a/include/reset.h b/include/reset.h
>> index 7185ade..d38f176 100644
>> --- a/include/reset.h
>> +++ b/include/reset.h
>> @@ -60,6 +60,24 @@ struct reset_ctl {
>> ????? unsigned long id;
>> ? };
>> ? +/**
>> + * struct reset_ctl_bulk - A handle to (allowing control of) a bulk of reset
>> + * signals.
>> + *
>> + * Clients provide storage for the reset control bulk. The content of the
>> + * structure is managed solely by the reset API. A reset control bulk struct is
>> + * initialized by "get"ing the reset control bulk struct.
>> + * The reset control bulk struct is passed to all other bulk reset APIs to apply
>> + * the API to all the reset signals in the bulk struct.
>> + *
>> + * @resets: An array of reset signal handles handles.
>> + * @count: The number of reset signal handles in the reset array.
>> + */
>> +struct reset_ctl_bulk {
>> +??? struct reset_ctl *resets;
>> +??? unsigned int count;
>> +};
>> +
>> ? #ifdef CONFIG_DM_RESET
>> ? /**
>> ?? * reset_get_by_index - Get/request a reset signal by integer index.
>> @@ -81,6 +99,22 @@ int reset_get_by_index(struct udevice *dev, int index,
>> ???????????????? struct reset_ctl *reset_ctl);
>> ? ? /**
>> + * reset_get_bulk - Get/request all reset signals of a device.
>> + *
>> + * This looks up and requests all reset signals of the client device; each
>> + * device is assumed to have n reset signals associated with it somehow,
>> + * and this function finds and requests all of them in a separate structure.
>> + * The mapping of client device reset signals indices to provider reset signals
>> + * may be via device-tree properties, board-provided mapping tables, or some
>> + * other mechanism.
>> + *
>> + * @dev:??? The client device.
>> + * @bulk??? A pointer to a reset control bulk struct to initialize.
>> + * @return 0 if OK, or a negative error code.
>> + */
>> +int reset_get_bulk(struct udevice *dev, struct reset_ctl_bulk *bulk);
>> +
>> +/**
>> ?? * reset_get_by_name - Get/request a reset signal by name.
>> ?? *
>> ?? * This looks up and requests a reset signal. The name is relative to the
>> @@ -132,6 +166,21 @@ int reset_free(struct reset_ctl *reset_ctl);
>> ? int reset_assert(struct reset_ctl *reset_ctl);
>> ? ? /**
>> + * reset_assert_bulk - Assert all reset signals in a reset control bulk struct.
>> + *
>> + * This function will assert the specified reset signals in a reset control
>> + * bulk struct, thus resetting the affected HW module(s). Depending on the
>> + * reset controller hardware, the reset signals will either stay asserted
>> + * until reset_deassert_bulk() is called, or the hardware may autonomously
>> + * clear the reset signals itself.
>> + *
>> + * @bulk:??? A reset control bulk struct that was previously successfully
>> + *??????? requested by reset_get_bulk().
>> + * @return 0 if OK, or a negative error code.
>> + */
>> +int reset_assert_bulk(struct reset_ctl_bulk *bulk);
>> +
>> +/**
>> ?? * reset_deassert - Deassert a reset signal.
>> ?? *
>> ?? * This function will deassert the specified reset signal, thus releasing the
>> @@ -145,6 +194,20 @@ int reset_assert(struct reset_ctl *reset_ctl);
>> ? int reset_deassert(struct reset_ctl *reset_ctl);
>> ? ? /**
>> + * reset_deassert_bulk - Deassert all reset signals in a reset control bulk
>> + * struct.
>> + *
>> + * This function will deassert the specified reset signals in a reset control
>> + * bulk struct, thus releasing the affected HW modules() from reset, and
>> + * allowing them to continue normal operation.
>> + *
>> + * @bulk:??? A reset control bulk struct that was previously successfully
>> + *??????? requested by reset_get_bulk().
>> + * @return 0 if OK, or a negative error code.
>> + */
>> +int reset_deassert_bulk(struct reset_ctl_bulk *bulk);
>> +
>> +/**
>> ?? * reset_release_all - Assert/Free an array of previously requested resets.
>> ?? *
>> ?? * For each reset contained in the reset array, this function will check if
>> @@ -156,6 +219,23 @@ int reset_deassert(struct reset_ctl *reset_ctl);
>> ?? * @return 0 if OK, or a negative error code.
>> ?? */
>> ? int reset_release_all(struct reset_ctl *reset_ctl, int count);
>> +
>> +/**
>> + * reset_release_bulk - Assert/Free an array of previously requested reset
>> + * signals in a reset control bulk struct.
>> + *
>> + * For each reset contained in the reset control bulk struct, this function
>> + * will check if reset has been previously requested and then will assert
>> + * and free it.
>> + *
>> + * @bulk:??? A reset control bulk struct that was previously successfully
>> + *??????? requested by reset_get_bulk().
>> + * @return 0 if OK, or a negative error code.
>> + */
>> +static inline int reset_release_bulk(struct reset_ctl_bulk *bulk)
>> +{
>> +??? return reset_release_all(bulk->resets, bulk->count);
>> +}
>> ? #else
>> ? static inline int reset_get_by_index(struct udevice *dev, int index,
>> ?????????????????????? struct reset_ctl *reset_ctl)
>> @@ -163,6 +243,11 @@ static inline int reset_get_by_index(struct udevice *dev, int index,
>> ????? return -ENOTSUPP;
>> ? }
>> ? +static inline int reset_get_bulk(struct udevice *dev, struct clk_bulk *bulk)
> Should be struct reset_ctl_bulk instead of struct clk_bulk
>> +{
>> +??? return -ENOTSUPP;
>> +}
>> +
>> ? static inline int reset_get_by_name(struct udevice *dev, const char *name,
>> ????????????????????? struct reset_ctl *reset_ctl)
>> ? {
>> @@ -179,16 +264,30 @@ static inline int reset_assert(struct reset_ctl *reset_ctl)
>> ????? return 0;
>> ? }
>> ? +static inline int reset_assert_bulk(struct reset_ctl_bulk *bulk)
>> +{
>> +??? return 0;
>> +}
>> +
>> ? static inline int reset_deassert(struct reset_ctl *reset_ctl)
>> ? {
>> ????? return 0;
>> ? }
>> ? +static inline int reset_deassert_bulk(struct reset_ctl_bulk *bulk)
>> +{
>> +??? return 0;
>> +}
>> +
>> ? static inline int reset_release_all(struct reset_ctl *reset_ctl, int count)
>> ? {
>> ????? return 0;
>> ? }
>> ? +static inline int reset_release_bulk(struct clk_bulk *bulk)
> ditto.
> 
> Jean-Jacques
>> +{
>> +??? return 0;
>> +}
>> ? #endif
>> ? ? #endif
> 

You are right, I will push a fix ASAP.

Neil

  reply	other threads:[~2018-04-12  8:14 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-03  9:40 [PATCH v2 u-boot 0/2] " Neil Armstrong
2018-04-03  9:40 ` [PATCH v2 u-boot 1/2] " Neil Armstrong
2018-04-03 17:53   ` Simon Glass
2018-04-11 14:05   ` [U-Boot, v2, u-boot, " Tom Rini
2018-04-14  0:11     ` Marek Vasut
2018-04-14 13:51       ` Tom Rini
2018-04-11 15:49   ` [U-Boot] [PATCH v2 u-boot " Jean-Jacques Hiblot
2018-04-12  8:14     ` Neil Armstrong [this message]
2018-04-03  9:40 ` [PATCH v2 u-boot 2/2] reset: add sandbox test for bulk API Neil Armstrong
2018-04-03 17:53   ` Simon Glass
2018-04-04  8:45     ` Neil Armstrong
2018-04-08 13:56       ` Simon Glass
2018-04-11 14:05   ` [U-Boot,v2,u-boot,2/2] " Tom Rini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=b1c6ae2c-c948-f309-7b11-368973a4249b@baylibre.com \
    --to=narmstrong@baylibre.com \
    --cc=linus-amlogic@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®