From: Neil Armstrong <neil.armstrong@linaro.org>
To: soc@kernel.org, arm@kernel.org
Cc: linux-amlogic@lists.infradead.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [GIT PULL] amlogic ARM64 DT updates for v6.3
Date: Mon, 30 Jan 2023 14:50:01 +0100 [thread overview]
Message-ID: <b220e2a7-34f0-b7a8-b316-1aebaea7e03a@linaro.org> (raw)
In-Reply-To: <c1641ffd-71c9-9ac9-89d9-c22da4acea10@linaro.org>
On 30/01/2023 14:46, Neil Armstrong wrote:
> Hi,
>
> Here's a set of Amlogic ARM64 DT changes for v6.3.
>
> New boards are added:
> - Odroid-N2L using S922X (Smaller version of Odroid-N2+)
> - BananaPi M2-Pro using S905X4 (Variant of BPI=M5 with on-board wifi)
Small typo, it's S905X3 not X4...
Neil
> - Radxa Zero2 using A311D (Faster version of Radza Zero)
>
> The NNA reset & NNA power domain bindings were added to an immutable branch
> and merged in this PR and the drivers DR PR to satisfy build-time
> dependencies.
>
> A cleanup & fixup of the ARM64 DT has started, first by covering easy
> mistakes like invalid node names & missing unit address.
> This goes along a complete migration of bindings to dt-schema, which
> are merged by the respective maintainers, the migration will cover the next
> Lnux versions.
>
> In addition, the following changes are added:
> - Add DT node for the VIPNano-QI on the A311D, a Neural Network variant of the Vivant GPU core
> - remove CPU opps below 1GHz for G12A boards, like it was done for G12B/SM1
> - Fix WiFi/Bt definition around P212 & Khadas VIM1
> - Add audio node to P212
> - Fix FAN trip definition to Odroid-HC4
> - Fix gpio-fan gpios definition
> - Permit Radxa Zero OTG on USB1
> - Fix VDDIO_C enable gpio by using OPEN DRAIN flag
>
> Neil
>
> The following changes since commit 1b929c02afd37871d5afb9d498426f83432e71c2:
>
> Linux 6.2-rc1 (2022-12-25 13:41:39 -0800)
>
> are available in the Git repository at:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git tags/amlogic-arm64-dt-for-v6.3
>
> for you to fetch changes up to d747e7f76a5fa6e3deb4c419df768f9ee49c2161:
>
> arm64: dts: meson: add support for Radxa Zero2 (2023-01-27 18:01:56 +0100)
>
> ----------------------------------------------------------------
> Amlogic ARM64 DT changes for v6.3:
> - Merge of immutable bindings branch with Reset & power domain binding
> - New boards:
> - Odroid-N2L (Smaller version of Odroid-N2+)
> - BananaPi M2-Pro (Variant of BPI=M5 with on-board wifi)
> - Radxa Zero2 (New version of Radza Zero with A311D SoC)
> - Add DT node for the VIPNano-QI on the A311D
> - DT bindings fixups covering all SoC families
> - MAC address nodes
> - ethernet PHY node name
> - scpi & child node names
> - SD/SDIO node name
> - USB supply name
> - invalid clock-names
> - rng node name
> - rtc node name
> - ETH phy mux node name
> - button & adc keys node name
> - leds node names
> - RK818 pmic properties
> - remove CPU opps below 1GHz for G12A boards, like it was done for G12B/SM1
> - Fix WiFi/Bt definition around P212 & Khadas VIM1
> - Add audio node to P212
> - Fix FAN trip definition to Odroid-HC4
> - Fix gpio-fan gpios definition
> - Permit Radxa Zero OTG on USB1
> - Fix VDDIO_C enable gpio by using OPEN DRAIN flag
>
> ----------------------------------------------------------------
> Christian Hewitt (12):
> arm64: dts: meson: remove CPU opps below 1GHz for G12A boards
> arm64: dts: meson: add Broadcom WiFi to P212 dtsi
> arm64: dts: meson: move pwm_ef node in P212 dtsi
> arm64: dts: meson: remove WiFi/BT nodes from Khadas VIM1
> arm64: dts: meson: add audio playback to S905X-P212 dts
> arm64: dts: meson: radxa-zero: allow usb otg mode
> arm64: dts: meson: bananapi-m5: switch VDDIO_C pin to OPEN_DRAIN
> arm64: dts: meson: bananapi-m5: remove redundant status from sound node
> arm64: dts: meson: bananapi-m5: convert dts to dtsi
> dt-bindings: arm: amlogic: add support for BananaPi M2-Pro
> arm64: dts: meson: add support for BananaPi M2-Pro
> dt-bindings: arm: amlogic: add support for Radxa Zero2
>
> David Heidelberg (1):
> arm64: dts: meson-gxm-khadas-vim2: use gpio-fan matrix instead of an array
>
> Heiner Kallweit (1):
> arm64: dts: amlogic: Fix non-compliant SD/SDIO node names
>
> Krzysztof Kozlowski (1):
> arm64: dts: amlogic: align LED node names with dtschema
>
> Martin Blumenstingl (6):
> arm64: dts: meson-gxl: jethub-j80: Fix WiFi MAC address node
> arm64: dts: meson-gxl: jethub-j80: Fix Bluetooth MAC node name
> arm64: dts: meson-axg: jethub-j1xx: Fix MAC address node names
> arm64: dts: meson-gx: Fix Ethernet MAC address unit name
> arm64: dts: meson-g12a: Fix internal Ethernet PHY unit name
> arm64: dts: meson-gx: Fix the SCPI DVFS node name and unit address
>
> Neil Armstrong (19):
> Merge branch 'v6.3/bindings' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into v6.3/arm64-dt
> arm64: dts: amlogic: meson-gx: fix SCPI clock dvfs node name
> arm64: dts: amlogic: meson-axg: fix SCPI clock dvfs node name
> arm64: dts: amlogic: meson-gx: add missing SCPI sensors compatible
> arm64: dts: amlogic: meson-axg-jethome-jethub-j1xx: fix supply name of USB controller node
> arm64: dts: amlogic: meson-gxl-s905d-sml5442tw: drop invalid clock-names property
> arm64: dts: amlogic: meson-gx: add missing unit address to rng node name
> arm64: dts: amlogic: meson-gxl-s905w-jethome-jethub-j80: fix invalid rtc node name
> arm64: dts: amlogic: meson-axg-jethome-jethub-j1xx: fix invalid rtc node name
> arm64: dts: amlogic: meson-gxl: add missing unit address to eth-phy-mux node name
> arm64: dts: amlogic: meson-gx-libretech-pc: fix update button name
> arm64: dts: amlogic: meson-sm1-bananapi-m5: fix adc keys node names
> arm64: dts: amlogic: meson-gxl-s905d-phicomm-n1: fix led node name
> arm64: dts: amlogic: meson-gxbb-kii-pro: fix led node name
> arm64: dts: amlogic: meson-g12b-odroid-go-ultra: fix rk818 pmic properties
> arm64: dts: amlogic: meson-sm1-odroid-hc4: fix active fan thermal trip
> dt-bindings: arm: amlogic: document Odroid-N2L
> arm64: dts: meson-g12b: move common node into new odroid.dtsi
> arm64: dts: meson-g12b-odroid: Add initial support for Hardkernel ODROID-N2L
>
> Tomeu Vizoso (3):
> dt-bindings: reset: meson-g12a: Add missing NNA reset
> dt-bindings: power: Add G12A NNA power domain
> arm64: dts: Add DT node for the VIPNano-QI on the A311D
>
> Yuntian Zhang (1):
> arm64: dts: meson: add support for Radxa Zero2
>
> Documentation/devicetree/bindings/arm/amlogic.yaml | 3 +
> arch/arm64/boot/dts/amlogic/Makefile | 3 +
> .../dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi | 10 +-
> arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 6 +-
> arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 16 +-
> .../boot/dts/amlogic/meson-g12a-radxa-zero.dts | 1 -
> arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 20 -
> .../dts/amlogic/meson-g12b-odroid-go-ultra.dts | 2 +-
> .../boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 448 +------------------
> .../boot/dts/amlogic/meson-g12b-odroid-n2l.dts | 125 ++++++
> arch/arm64/boot/dts/amlogic/meson-g12b-odroid.dtsi | 445 +++++++++++++++++++
> .../boot/dts/amlogic/meson-g12b-radxa-zero2.dts | 489 +++++++++++++++++++++
> arch/arm64/boot/dts/amlogic/meson-g12b.dtsi | 4 +
> .../boot/dts/amlogic/meson-gx-libretech-pc.dtsi | 2 +-
> arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 6 +-
> arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts | 2 +-
> .../dts/amlogic/meson-gxl-s905d-phicomm-n1.dts | 2 +-
> .../boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts | 1 -
> .../amlogic/meson-gxl-s905w-jethome-jethub-j80.dts | 6 +-
> .../dts/amlogic/meson-gxl-s905x-khadas-vim.dts | 15 -
> .../boot/dts/amlogic/meson-gxl-s905x-p212.dts | 68 +++
> .../boot/dts/amlogic/meson-gxl-s905x-p212.dtsi | 21 +-
> arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 2 +-
> .../boot/dts/amlogic/meson-gxm-khadas-vim2.dts | 9 +-
> .../boot/dts/amlogic/meson-sm1-bananapi-m2-pro.dts | 97 ++++
> .../boot/dts/amlogic/meson-sm1-bananapi-m5.dts | 428 +-----------------
> .../arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi | 435 ++++++++++++++++++
> .../boot/dts/amlogic/meson-sm1-odroid-hc4.dts | 10 +-
> arch/arm64/boot/dts/amlogic/meson-sm1.dtsi | 4 +
> include/dt-bindings/power/meson-g12a-power.h | 1 +
> .../dt-bindings/reset/amlogic,meson-g12a-reset.h | 4 +-
> 31 files changed, 1746 insertions(+), 939 deletions(-)
> create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2l.dts
> create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-odroid.dtsi
> create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts
> create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m2-pro.dts
> create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
prev parent reply other threads:[~2023-01-30 13:50 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-30 13:46 Neil Armstrong
2023-01-30 13:50 ` Neil Armstrong [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b220e2a7-34f0-b7a8-b316-1aebaea7e03a@linaro.org \
--to=neil.armstrong@linaro.org \
--cc=arm@kernel.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=soc@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®