From mboxrd@z Thu Jan 1 00:00:00 1970 From: webczat_200@poczta.onet.pl (=?UTF-8?Q?Micha=c5=82_Zegan?=) Date: Wed, 28 Dec 2016 04:06:14 +0100 Subject: problems with odroid c2 support with kernel 4.10 from master Message-ID: To: linus-amlogic@lists.infradead.org List-Id: linus-amlogic.lists.infradead.org Hello. I have kernel 4.10 from master, with most thing compiled as modules (personal preference), running on odroid c2. I am now in a basic/test initramfs with a shell and modules at hand, trying to load them. There seem to be few problems there with usb. Fixed regulator is now loaded. I load the phy-meson8b-usb2 first, then dwc2. I get so: note the errors at the beginning. usb0 does not start, usb1 does start. c9000000.usb supply vusb_d not found, using dummy regulator c9000000.usb supply vusb_a not found, using dummy regulator phy phy-c0000000.phy.0: USB ID detect failed! phy phy-c0000000.phy.0: phy poweron failed --> -22 dwc2: probe of c9000000.usb failed with error -22 c9100000.usb supply vusb_d not found, using dummy regulator c9100000.usb supply vusb_a not found, using dummy regulator dwc2 c9100000.usb: DWC OTG Controller dwc2 c9100000.usb: new USB bus registered, assigned bus number 1 dwc2 c9100000.usb: irq 20, io mem 0x00000000 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: DWC OTG Controller usb usb1: Manufacturer: Linux 4.10.0-rc1 dwc2_hsotg usb usb1: SerialNumber: c9100000.usb hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected Also another thing: trying to load arm-scpi and things like cpufreq or hwmon modules for scpi, it seems scpi is not detected, not sure what is missing? -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 525 bytes Desc: OpenPGP digital signature URL: